English channels on the intelsat 907 27.5w with the V8

[akromai]

HI.
Has anyone been able to solve the problem that exists to be able to see these channels encoded in biss?
thank

[cpr43]

Channel are hidden in the stream and will not scan in using regular process. You will need to enter them manually using the channel editor. Please advice.

[STRETCH]

I have added the said channels via the (channel editor) to my v8 Nova Orange, not having must luck with this task.(I have correct keys)
Using the (DBEditor)(Program Information)
BBC ONE HD
v_pid 6101
a_pid 6102
a_type1 ??? PCM (audio for this is MPEG4)
a_pid2 0
p_pid 6101

tv_flag 1

is_scramble ??? 1 or is another number
s_id 1 or is this another number
bq_flag 1 or is this another number

Video on these channels are H264
This may be one for the engineers

Den

[cpr43]

I have added the said channels via the (channel editor) to my v8 Nova Orange, not having must luck with this task.(I have correct keys)
Using the (DBEditor)(Program Information)
BBC ONE HD
v_pid 6101
a_pid 6102
a_type1 ??? PCM (audio for this is MPEG4)
a_pid2 0
p_pid 6101

tv_flag 1

is_scramble ??? 1 or is another number
s_id 1 or is this another number
bq_flag 1 or is this another number

Video on these channels are H264
This may be one for the engineers

Den

Do one channel at the time. Leave your box in Intel 907 27.5W but move your dish to another sat which may have biss channel. Sd and HD. Scan the sat. Then go to the editor and change channel name , Vpid, Apid PPid with BBC info and leave the rest as is. Finally move your dish back to Intel 907 for test. Try one channel SD and one HD and test. If you get good results add the rest. If for any reason keys are outdated you can do a 2-3 minutes TS record and send for evaluation.

Question: Are you in USA? Does this sat reach the USA cost?

Code: Select all

CBeebies UK (06-19) VPID 401 APID 402 PPID 401 

BBC Four (19-03) VPID 401 APID 402 PPID 401 

BBC News VPID 501 APID 502 PPID 501 MPEG-2/SD 

BBC Parliament VPID 601 APID 602 PPID 601 MPEG-2/SD 

BBC Red VPID 901 APID 951 PPID 901 MPEG-2/SD

BBC One Wales VPID 3101 APID 3102 PPID 3101 MPEG-2/SD

BBC One Scotland VPID 4101 APID 4102 PPID 4101 MPEG-2/SD

BBC One Northern Ireland VPID 5101 APID 5102 PPID 5101 MPEG-2/SD

BBC TWO HD VPID 6101 APID 6102 PPID 6101 MPEG-4/HD

ITV HD VPID 6201 APID 6202 PPID 6201 MPEG-4/HD

CHANNEL4 HD VPID 6301 APID 6302 PPID 6301 MPEG-4/HD

CHANNEL5 HD VPID 6401 APID 6402 PPID 6401 MPEG-4/HD

BBC ONE HD VPID 6601 APID 6602 PPID 6601 MPEG-4/HD

CBBC VPID 7001 APID 7002 PPID 7001 MPEG-4/HD

More 4 UK VPID 7501 APID 7502 PPID 7501 MPEG-2/SD

[STRETCH]

I will give it another go to clear any of the channels. I can clear the said channels with another receiver plus powervu (apart from A F N) before they changed to the new hash mode( the said firm does not support there receivers any more)
I am based in the UK.

Den

[Feralkiwi]

Note if a channel SID is active on the TP the freesat box will auto update the channel data. Owen

[STRETCH]

I have had a few more goes at this task, via the dbeditor, can get the (Encrypted Program) up on the screen instead of a (black screen).
Did get a picture but no sound, went to another channel, which went (encrypted) went back to my first channel (that was encrypted also).
I will leave this for the professionals.

Den

[cpr43]

No sound is the the choice of right audio format in the editor. Mostly MPEG, AC3 or AAC. HD channels usually used AC3 while Sd used MPEG

[STRETCH]

The sound on these channels are (MPEG4) which I know from my other receiver, in the DBeditor the dropdown does not have this (mpeg1 2 3 plus others

Den

[cpr43]

Like I told you before. Move the dish to another sat and scan any channel that show same video and audio specs. Then move the dish back. Modify channel name, video and audio pids and try.

[STRETCH]

I am moving my dish farm at the moment, will have another go at this task and let you know how I get on

Den

[STRETCH]

Moved one of my dishes to another sat and scanned a channel which had same video and audio spec's, modified the channel name, video and audio pid's etc, with this info I sent the receiver to 27.5w with S 89 Q63 but still no joy in clearing the said channels.
Did a few updates but still no luck.

Den

[akromai]

I have also been doing tests and configurations, and I have not achieved anything
help, help, helppppppp

[STRETCH]

There is a thread in the V7 section about the same subject.

Den

[cpr43]

Moved one of my dishes to another sat and scanned a channel which had same video and audio spec's, modified the channel name, video and audio pid's etc, with this info I sent the receiver to 27.5w with S 89 Q63 but still no joy in clearing the said channels.
Did a few updates but still no luck.

Den

Did you add the biss keys one by one while in each channel?? can you try? Can you let me know which keys are you using? Thanks

[STRETCH]

Been having another go to see if I can get any were this time.
To start with S90% Q69%
Went to another sat and scanned in a channel so to get a (ecm num) alt the info with the (dbedit).
I used BBC 1 HD (as my channel)
v-pid = 6601 same same same same same same
a-pid = 6602 same same same same same same
a type 1 = mp3 same same same mp1 same mp3
a pid 2 = 1 same 2 same 1 same same
a type 2 = aac mp3 aac v2 ac3 vsb ac3 vsb eac 3 pcm
p pid = 6601 same same same same same same
is scramble =1 same same same same same same
s-id = 1 same same same same same same
ecm no = 1 same same same same same same
After trying all of these one at a time, (I can get a picture but no sound), also when you move from 27.5w to go to another sat then back again to find that the said channel is (encrypted) (biss code (d5xxxxxxxxxxxx62).
Hope this may help someone

Den

[akromai]

Been having another go to see if I can get any were this time.
To start with S90% Q69%
Went to another sat and scanned in a channel so to get a (ecm num) alt the info with the (dbedit).
I used BBC 1 HD (as my channel)
v-pid = 6601 same same same same same same
a-pid = 6602 same same same same same same
a type 1 = mp3 same same same mp1 same mp3
a pid 2 = 1 same 2 same 1 same same
a type 2 = aac mp3 aac v2 ac3 vsb ac3 vsb eac 3 pcm
p pid = 6601 same same same same same same
is scramble =1 same same same same same same
s-id = 1 same same same same same same
ecm no = 1 same same same same same same
After trying all of these one at a time, (I can get a picture but no sound), also when you move from 27.5w to go to another sat then back again to find that the said channel is (encrypted) (biss code (d5xxxxxxxxxxxx62).
Hope this may help someone

Den

Hi STRETCH.
With the DB Editor, I have put the data that you have placed in the post.
With a USB I put it in the V8 Super.
I have put the Biss Key
I have scanned the satellite again.
And for now BBC 1 HD is being watched.
I've only had time to do it with this channel, when I can try the rest of the frequencies.
Thanks and regards.

[STRETCH]

What settings are you using, are you getting sound, when you move to another sat and then return is the channel still clearing.
The receiver that I am using is the V8 Nova which may not fully decode the said channels, ie Sound.


Den

[akromai]

What settings are you using, are you getting sound, when you move to another sat and then return is the channel still clearing.
The receiver that I am using is the V8 Nova which may not fully decode the said channels, ie Sound.


Den

hello the joy has lasted little
my receiver is the V8 super
1 I managed to watch BBC 1 HD, perfect audio and video
2 I put the data of the rest of HD and SD channels, all the perfect HD audio and video channels are seen, the SD not
3 I modify the data of the SD channels
4 I put the list back on the V8 super, and the receiver has performed a reset automatically, which has erased all channels
5 Now I don't see anything, I'm doing the same steps, but I can't see anything
you have to take a series of steps to make it look, but I can't get it again
Greetings.

[STRETCH]

When you get time get your receiver back to how it was before making any adjustments to gain 27.5w and (make a BACKUP) and keep to one side on another usb. as they say keep trying.

Den

[akromai]

Hi all.

For now, I've managed to watch English channels.

I watch all HD channels, but it takes about 7 seconds to decode when the channel is changed. Audio and video OK
The two SD channels I have set, only audio.

Attached list of data entered in V8 Super, and generated with DB editor.
I have introduced the Biss Key all by menu - conditional access - 6666 - edit password - (red button) import
Check photo.

Hope that helps

regards

Edited:
No key in public