V8 Pro2 Blind Scan Stuck...
Moderators: admin, GTMedia Team
Re: V8 Pro2 Blind Scan Stuck...
Any fix for this? 91W blindscan stuck at 65%
Re: V8 Pro2 Blind Scan Stuck...
Yes, the post by "bwe" above your post here is saying that the new software version has fixed this.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 Pro2 Blind Scan Stuck...
Thank you for the post! My signal stayed solid and quality went to 0 after 2 blind scans on December firmware. Just updated and all is good
Re: V8 Pro2 Blind Scan Stuck...
Did you update using the "All Code" method?
This does a factory reset as part of the update.
Owen
This does a factory reset as part of the update.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 Pro2 Blind Scan Stuck...
The receiver comes to a grinding halt as soon as it tries to scan in 11912V at a symbolrate of 2000 which just happens to be at 65% scan.
On my TBS5927 I can watch and see when this transponder turns off, when that happens the receiver will scan all the way thru.
Would be nice if we could adjust the lower symbolrate threshold.
On my TBS5927 I can watch and see when this transponder turns off, when that happens the receiver will scan all the way thru.
Would be nice if we could adjust the lower symbolrate threshold.
Re: V8 Pro2 Blind Scan Stuck...
It's been getting stuck for me again, too. Same TP, 11912 V 2000. Just a few days ago it was completing the blind scan. Thanks for the information about the TP "turning off". It must have "turned off" when I successfully scanned a few days ago. I wasn't aware the TP was doing it. I hope the developers are reading this thread, and please correct this issue.moltar wrote: ↑Wed Apr 08, 2020 11:50 pmThe receiver comes to a grinding halt as soon as it tries to scan in 11912V at a symbolrate of 2000 which just happens to be at 65% scan.
On my TBS5927 I can watch and see when this transponder turns off, when that happens the receiver will scan all the way thru.
Would be nice if we could adjust the lower symbolrate threshold.
V8 Pro2, V8 Nova, V7 Plus, V8X, X8, GTC, GT Combo and V8 Finder
Re: V8 Pro2 Blind Scan Stuck...
There are about 28 radio channels on 11912V, Groove Distribution, so I don't expect the services to move anytime soon.
The receiver might think its video.
The receiver might think its video.