Page 1 of 1
flashear un gt media v8 pro2
Posted: Sat Nov 09, 2019 7:42 pm
by squall
buenas tardes
compre un gt media v8 pro2 y solo aparece en la pantalla del receptor la palabra boot y se reinicia y reinicia una y otra vez
como puedo corregir esto.
desde ya gracias
Re: flashear un gt media v8 pro2
Posted: Sun Nov 10, 2019 4:44 pm
by squall
necesito de su ayuda para poder echar a volar este receptor
Re: flashear un gt media v8 pro2
Posted: Sun Nov 10, 2019 9:07 pm
by Captain Ron
Sounds like its locked in a repeated Boot, and you will need to use the ( flash.bin ) recovery
1. Format USB Drive in FAT32
2. Download and save the latest update for your particular Receiver/Deco onto your PC in a file ....... unzip it and put the file (.bin) on your USB Flash Drive and change its name to ( flash.bin ) ......
3. Insert USB with ( flash.bin ) file into Deco/Receiver.
4. Use Switch on back or Plug in power cord and it should auto boot while you repeat pressing "Menu" on the remote.
5. It should begin to load the .bin file and you should see on the TV where it says "Do not Power Off" and let it run and it should auto reboot and run normally.
Good Luck and Beers to you!
Re: flashear un gt media v8 pro2
Posted: Sun Nov 10, 2019 11:40 pm
by squall
Captain Ron wrote: ↑Sun Nov 10, 2019 9:07 pm
Sounds like its locked in a repeated Boot, and you will need to use the ( flash.bin ) recovery
1. Format USB Drive in FAT32
2. Download and save the latest update for your particular Receiver/Deco onto your PC in a file ....... unzip it and put the file (.bin) on your USB Flash Drive and change its name to ( flash.bin ) ......
3. Insert USB with ( flash.bin ) file into Deco/Receiver.
4. Use Switch on back or Plug in power cord and it should auto boot while you repeat pressing "Menu" on the remote.
5. It should begin to load the .bin file and you should see on the TV where it says "Do not Power Off" and let it run and it should auto reboot and run normally.
Good Luck and Beers to you!
thanks for the advice. I hope to invite you a beer
I did what you told me but it's still the same
any other suggestions.
Re: flashear un gt media v8 pro2
Posted: Mon Nov 11, 2019 12:37 am
by Captain Ron
Perhaps try it using some older update files.
Seems like quite a few people have had these lockup issues on the latest updates.