I closed the evening did not open in the morning.
Can I install firmware with rs232 cable?
I have photo look this.
Boot does not appear on the screen!
Moderators: admin, GTMedia Team
Boot does not appear on the screen!
- Attachments
-
- 20191116_022659_HDR[1].jpg (2.88 MiB) Viewed 856 times
-
- Posts: 548
- Joined: Thu Nov 29, 2018 12:50 am
Re: Boot does not appear on the screen!
The below is a fix for the V7 for if you have a Green Light (ON) but it doesnt show bootup on the face of the Receiver there is a possible fix at the below link.
I've never done this and not sure if its for the V8's or V9's so I would wait and see if Admins or Mods ( Feralkiwi or CPR43 ) have other ideas like maybe trying the flash.bin update
So I strongly advise to wait and see what they say on it.
viewtopic.php?f=51&t=7535&sid=afdc611e5 ... 35422d528c
If you end up trying this fix, make sure to read and follow the instructions !!!
I've never done this and not sure if its for the V8's or V9's so I would wait and see if Admins or Mods ( Feralkiwi or CPR43 ) have other ideas like maybe trying the flash.bin update
So I strongly advise to wait and see what they say on it.
viewtopic.php?f=51&t=7535&sid=afdc611e5 ... 35422d528c
If you end up trying this fix, make sure to read and follow the instructions !!!
Re: Boot does not appear on the screen!
Thanks ron but I have one question please help me.
I need to get this cable or what.
I need to get this cable or what.
- Attachments
-
- 32343.jpg (98.45 KiB) Viewed 801 times
-
- 61YpG2fjjpL._SL1000_.jpg (52.02 KiB) Viewed 801 times
-
- Posts: 548
- Joined: Thu Nov 29, 2018 12:50 am
Re: Boot does not appear on the screen!
PM'd You !
-
- Posts: 1
- Joined: Wed Sep 11, 2019 9:06 am
Re: Boot does not appear on the screen!
did you solve your problem?