Configuração diseqc
Moderators: admin, GTMedia Team
-
- Posts: 166
- Joined: Fri May 18, 2018 1:29 am
Configuração diseqc
Tenho uma chave disqec 8x1 , configurei as portas , mais está sem sinal , o que devo fazer ?
Re: Configuração diseqc
Use the DiSEqC 1.1 option for the 8 port switch.
If you have a very early model of the V8 Finder V71 it had issues with the internal power supply switching at 22kHz so it would not do any DiSEqC switching and would not access the low band of any universal LNB.
If this is your problem, running the V71 on the charger helps a little.
Owen
If you have a very early model of the V8 Finder V71 it had issues with the internal power supply switching at 22kHz so it would not do any DiSEqC switching and would not access the low band of any universal LNB.
If this is your problem, running the V71 on the charger helps a little.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Configuração diseqc
Hola amigo, yo tengo así configurado mi v8pro2 y funciona perfectamente :Joaquimoliveira wrote: ↑Tue Nov 19, 2019 2:49 amTenho uma chave disqec 8x1 , configurei as portas , mais está sem sinal , o que devo fazer ?
Llave disecq : En Conversor Sat utilizado
Puerto 1…………………………… 1CasM1:Port1…………………………………43,1w banda c Intelsat 11
Puerto 2……………………………1CasM1:Port2 …………………………………58w Banda c Intelsat 21
Puerto 3……………………………1CasM2:Port2………………………………….61w Banda ku Amazonas 2,3,5
Puerto 4……………………………2Cas:Port2…………………………………….70w Banda ku Star One c2,c4
Puerto 5……………………………2Cas:Port5……………………………………..81w Banda ku Arsat 2
Espero te sirva, saludos