AutoBiss Howto

[alex.c]

The function of AutoBiss has been used by more and more people. I see hundreds of keys were found.
But always someone asks me why I can't get keys of some channels.
I will explain all about AutoBiss.
1. It's not that all BISS channels can be decoded by AutoBiss.
2. Even someone got a key from a channel at sometime, not mean you can get the key at another time.
3. Don't blame AutoBiss doesn't work. No other model can decode every BISS channels.

To better use AutoBiss:
1. Connect to network.
2. Try to scan the channels at correct longitude/frequency/SID, then you can get keys directly from the other people's previous calculation.
3. For some special channels, try to trigger the calculation at special time. I don't know what is special time. Maybe when the picture is still.
4. The AutoBiss calculation only can be triggered one time in 6 hours. If you want to try again, power off and then power on.

[Arbourboateng]

Which reciever are you talking about or all Gt media decoder can work with the process you are talking about.

[alex.c]

they need to improve their biss server

Yes, you are right. There are plenty areas for improvement.
We will keep increasing the success rate.

[Xsat]

Sometimes the feed has several providers, so the TP is the same but the CW is different.
In that case, it may not operate properly.
Therefore, advanced conditions need to be added to increase the probability of success.

[juan_vale]

Something to be aware of is some wild-feeds send the data needed to extract the CW while they are setting up, once the program starts they drop that data, best to get in early when looking for wild-feeds.

[Peugeot 207]

they need to improve their biss server

Yes, you are right. There are plenty areas for improvement.
We will keep increasing the success rate.

I'm OK with that.
But, nobody answered at my question:
Where founded CW's were stored?
Key edit list is always empty.
BISS and PV neither
Talking for AU, not manually key imput

[alex.c]

they need to improve their biss server

Yes, you are right. There are plenty areas for improvement.
We will keep increasing the success rate.

I'm OK with that.
But, nobody answered at my question:
Where founded CW's were stored?
Key edit list is always empty.
BISS and PV neither
Talking for AU, not manually key imput

Export to USB, you will see them.

[Peugeot 207]

Tnx @alex.c
Will try it.
Is it possible in future upgrade(s) to resolve issue that secrets menu"s , eg. Key edit & Cs protocol & Multiroom , became always up once activated by 6666 ?
It is so annoying every time to reactivated them
Regards

[alex.c]

I fixed a bug about AutoBiss today.
It will make user can really get the keys uploaded by the other user.
Of course, you must use the correct longitude/frequency/SID.

Please check give me some feedback.
Thank you.

[mrchuckfl]

Is there indication of what type channels AutoBiss can be used on ?

[alex.c]

Is there indication of what type channels AutoBiss can be used on ?

For now, just the channels have 2600(BISS) ECM.
But AutoBiss can work if the CW is constant and scramble algorithm is CSA2.0.

[maxblue]

OK alex.c.

thanks for the informacion.no we all know everything. I like people who explain simple.

[g-net]

hello members. AutoBiss calculation triggered one time in 6 hours or restart. I think this should be work on, i have seeing some STB doing autobiss at all time unless you switch the channel. we have a feed like signal 2, 3, and 6 at 10 east these feed come up at week end or live games and the change keys every times so we leave the channel on the feed for auto update from the server as long the keys is public somewhere the server will direct the keys to all the client boxes. so waiting 6 hours or restarting the box every time to auto update that need to be check.

[mrchuckfl]

Is there somewhere in the settings I need to turn on Auto Biss?

[STRETCH]

No, all within the software.

Den

[mrchuckfl]

Thanks! So just be patient.

[alex.c]

AutoBiss sever is upgrading for higher success rate.
There will be about 20 hours you can't get keys from new seeds.
But you can use AutoBiss normally except new seeds will pend on server till upgrading finish.

[alex.c]

AutoBiss sever is upgrading for higher success rate.
There will be about 20 hours you can't get keys from new seeds.
But you can use AutoBiss normally except new seeds will pend on server till upgrading finish.

Ohh i think that's why i couldnt unlock the AEW feed @ 105 west (tp 4131 H 14036) like 2 hours ago.

35 minutes and the "Autobiss Calculating" never disappeared on screen so i gave up.

When this upgrade to the server is done, can you please tell us, so we can check the wild feeds again? (i know you said 20 hrs, but could be less or more than that, right?)

Thank you.

Yes, it could be less or more. When it finish, I will let you know.
But the situation that Autobiss Calculating never disappeared is not caused by server.
You can't find the seed on some feeds, then “Autobiss Calculating” never disappeared.
Sorry, I can't explain more about why you can't find the seed. It just happened.

[alex.c]

AutoBiss server upgrading is complete.
The time is longer than expected. Sorry for that.

By the way, if you can't find the CW by AutoBiss calculation,
and you get this CW from another place, and you find this CW is not changed for a long time.
You can PM it to me, and I can set it to server. It will help the other users.
Thank you.

[msilver511]

Same here 113w 3985 H 7499 "AutoBISS:Calculating! Please wait...". 30 minutes... By the time It found the key (If I got the key) the event will be over hahahaha. Testing with V8X

[alex.c]

AutoBiss server upgrading is complete.
The time is longer than expected. Sorry for that.

By the way, if you can't find the CW by AutoBiss calculation,
and you get this CW from another place, and you find this CW is not changed for a long time.
You can PM it to me, and I can set it to server. It will help the other users.
Thank you.

Thank you alex!

I'm gonna start testing my new v8UHD on wild feeds (american satellite ark) and i'll post my results back.

Sadly, the majority of the sports wild feeds appeared on Weekends, and today is Tuesday, but hey!, there's always one feed or 2 every day, i'll try those if i can catch them.

Also i will try to P.M. you the CW if the v8UHD is not opening the feed (if im able to find the CW).

One last question... The Autobiss function will be the same as the current one?, i mean when you release the NEW firmware for the v8UHD, is it gonna work exactly the same as with the current TRIAL firmware version i am testing? or is it gonna be some kind of difference between them. Autobiss speaking only.

Thank you

Yes, Autobiss will be exactly the same as the current firmware.
And about the feed "Top Rank", I found the key from other place, some same made it. Is it this one 38XXXXXXXXXXXXB1？
Yes, sadly, we failed. I want to check the stream. Can you please record the TS file for me ?

[zacve]

espaun206. I sent it to you in private.

[alex.c]

espaun206. I sent it to you in private.

Is it stll transporting ?

[alex.c]

OK, I get the stream.
But I found nothing too.
About this kind of feeds, I think there are some special timings that we can get the keys.
For example, when the picture is just colorbar, at the begin of program.
I don't know, we need more experiment.

[alex.c]

Yes, Autobiss will be exactly the same as the current firmware.

And about the feed "Top Rank", I found the key from other place, some same made it. Is it this one 38XXXXXXXXXXXXB1？
Yes, sadly, we failed. I want to check the stream. Can you please record the TS file for me ?

alex.c i sent you a P.M. with a link to a 4 minute raw .ts video. Hope it helps.
And yes, thats the key 38xxxxxxxxBB1

I gave up, when i reachead 1 hour of waiting and no cw found

Check you PM

Sorry for that.
I will check your stream again.
Just like I said, about this kind of feeds, I think there are some special timings that we can get the keys.
For example, when the picture is just colorbar, at the begin of program.
We need to do more experiment by people like you.
I beleve the method we using is correct, just need some luck.