GTMEDIA_V8 Series Bug Tracking System

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by yayadie »

I am sorry, I din´t know, I´ll correct it, thanks!

STRETCH wrote:
Sat Sep 04, 2021 3:53 pm
You may find that your post may be deleted, or get a warning, you are using (caps) through out.

Den

yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by yayadie »

All problems found by now on the GTMEDIA V8 UHD receiver

Gtmedia V8 UHD issues:

Microfreeze images in combo channels and on some satellite channels too

Sometimes remote control delay reaction

Subtitles center-middle position, they are not posicionated center down

The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly

When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make

When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)

Legend speed when you plug usb device "device speed too low to record"

Sometimes legend volume stays on screen and you must buttom exit to close


I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!

ovibhai
Posts: 4
Joined: Sun Jul 18, 2021 4:34 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by ovibhai »

Microfreezing occurs in satellite in 97e gsat ku band satellite tp 11492 v 2600. Despite very strong signal the channel freezes for few seconds and again becomes normal and this process repeats after 10 seconds . It is really irritating. Please fix this bug in the next update.

Secondly satellite search mainly 5150 Freq and universal Freq 9750 10600 takes lot of time to complete search process. Earlier used to take less than 4 minutes for complete searching process now takes atleast 8mins. Eg: asiasat 5 100e cband, airtel 108e kuband, paksat 38e cband.
Hope to see this problem solved in the next update.

Ovi bhai.

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tom.w »

yayadie wrote:
Sat Sep 04, 2021 6:18 pm
All problems found by now on the GTMEDIA V8 UHD receiver

Gtmedia V8 UHD issues:

Microfreeze images in combo channels and on some satellite channels too

Sometimes remote control delay reaction

Subtitles center-middle position, they are not posicionated center down

The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly

When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make

When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)

Legend speed when you plug usb device "device speed too low to record"

Sometimes legend volume stays on screen and you must buttom exit to close


I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!
thank you very much.
we are checking these issues.and plan to fix them.

mos
Posts: 87
Joined: Tue Apr 17, 2018 4:05 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by mos »

hello, i very much like v8-uhd i only use it for satellite only.

i see message "moving dish..." for long time. can this message be fix for short time?

thanks
V8 Golden / V8 Novas / V8X/ GTC / V8 UHD

840
Posts: 91
Joined: Tue Apr 18, 2017 1:25 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by 840 »

better to put a swich to turn on or off.

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Feralkiwi »

mos wrote:
Mon Sep 20, 2021 12:30 am
hello, i very much like v8-uhd i only use it for satellite only.

i see message "moving dish..." for long time. can this message be fix for short time?

thanks
I think there is an option in menus to turn off all massages.
You can still press exit to clear it.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

kquijada
Posts: 37
Joined: Fri Nov 13, 2020 12:16 pm
Location: Venezuela
Contact:

Re: GTMEDIA_V8 Series Bug Tracking System

Post by kquijada »

Good afternoom. I have a V8x with the latest update V289_20210923 and I see that it has an error or detail, I have 3 satellites in my v8x, amazonas, star one and tupac katari, and all 3 show me the same intensity and quality, 95 intensity and 85 quality . I don't think this is normal.
--------------------
Gtmedia V8X 8-) Diseqc 4*1, Amazonas 61° W, Star One C2 70° W, Túpac Katari 87.2° W

leehrat
Posts: 195
Joined: Fri Jun 30, 2017 8:07 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by leehrat »

Same on my 23 c-band sats from 133 to 81 west all c-band show 95/85. Ku band not getting any signal.
All this on my v8x
Plugged my v8uhd and got the normal strengths and ku works fine.
Some problem in the latest file.

yayadie
Posts: 97
Joined: Mon Nov 02, 2020 7:07 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by yayadie »

Hi Tom...

Do you know when they will release another firmware that fixes what is still missing? With the last one, few things were solved, at least in my experience ... Many thanks

Another perceived problem, it happens to me with the satellite arsat2 (81w) the audio is ahead with the video. The solution is to change the channel and go back to the previous one and if it doesn't work I have to restart the receiver.


Tom.w wrote:
Wed Sep 08, 2021 7:03 am
yayadie wrote:
Sat Sep 04, 2021 6:18 pm
All problems found by now on the GTMEDIA V8 UHD receiver

Gtmedia V8 UHD issues:

Microfreeze images in combo channels and on some satellite channels too

Sometimes remote control delay reaction

Subtitles center-middle position, they are not posicionated center down

The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly

When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make

When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)

Legend speed when you plug usb device "device speed too low to record"

Sometimes legend volume stays on screen and you must buttom exit to close


I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!
thank you very much.
we are checking these issues.and plan to fix them.

maylon1000
Posts: 23
Joined: Wed Jan 18, 2017 12:24 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by maylon1000 »

Boa dia pessoal, meu v8nova blue está com pequenas travas nos canais powervu
principalmente na tp 4095 R 30000 mux da fox do ses6 e tp 3720 V 30000 mux da fox
intelsat 21, tem como corrigir isso?

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by cpr43 »

maylon1000 wrote:
Sun Nov 07, 2021 11:38 am
Boa dia pessoal, meu v8nova blue está com pequenas travas nos canais powervu
principalmente na tp 4095 R 30000 mux da fox do ses6 e tp 3720 V 30000 mux da fox
intelsat 21, tem como corrigir isso?
Hello

Try doing a factory reset. First do a backup or dump to your USB of all your settings/ channels. Re-install the latest bin file from V.519 (05/08/2021)
from here and re-install you DB backup

viewtopic.php?f=40&t=9460

maylon1000
Posts: 23
Joined: Wed Jan 18, 2017 12:24 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by maylon1000 »

Boa tarde amigo, já fiz esse procedimento mas não resolveu, talvez sejá algum bug do firmware.
Agradeço sua atenção, obrigado.

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GTMEDIA_V8 Series Bug Tracking System

Post by STRETCH »

What is your signal levels like on the said transponders.

Den

maylon1000
Posts: 23
Joined: Wed Jan 18, 2017 12:24 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by maylon1000 »

Boa tarde Strech.

tp 4095 R 30000 ses6, sinal 93 qualidade 80

tp 3720 V 30000 int 21, sinal 86 qualidade 72

Tenho um v7 HD testei nessas tp e funciona liso.

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by CAJE »

The EPG only fails one channel of each MUX, I thought it was only a problem with the Astra 19.2 satellite and I see what happens in all of them, and I would say that it is not 95% working but only works ⅓ of the EPG in the V8UHD, I refresh it with a USB connected and pressing the red key, until it is solved

Kozak#7
Posts: 4
Joined: Wed Dec 27, 2017 5:46 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Kozak#7 »

When playing any video media or pvr file, there is a date and time overlay being displayed on the top right corner of the screen. (It shows up several seconds after playback stars). Please remove this annoyance.
Thanks.

Mir5
Posts: 1
Joined: Sun Nov 28, 2021 7:00 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Mir5 »

Hello.
GTMEDIA V8 nova - problem when switching channels with the remote control. they always jump by 2 channels when the up arrow is pressed. when I press the button down it's ok 1 down?
what could be the reason?

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Feralkiwi »

Mir5 wrote:
Sun Nov 28, 2021 7:16 pm
Hello.
GTMEDIA V8 nova - problem when switching channels with the remote control. they always jump by 2 channels when the up arrow is pressed. when I press the button down it's ok 1 down?
what could be the reason?
The button on the remote could be worn and acts like it is pressed twice.
It could be that you move the remote as you press it and the set top box sees the IR signal, then not, then sees it again and thinks there were two presses of the button. Move the box by the TV so it faces the room better so it sees the remote more.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GTMEDIA_V8 Series Bug Tracking System

Post by STRETCH »

Depends how heavy you are with the arrows, i also have the same issue, been heavy handed some times.
You could just press the numbers you require for the channel, you can hold the remote between thumb and second index finger, using the fore finger to press the numbers.

Den

SRT5555
Posts: 8
Joined: Tue Dec 07, 2021 1:41 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by SRT5555 »

These changes are requested for next firmware update. I use the V8x (11/2021 firmware) for searching out satellite feeds. I use a DiSeqc HH rotor to move the dish. I have tapped off the antenna input and fed it to a spectrum analyzer. As I traverse the dish, I can see the various sat footprints on the analyzer. Then I run a blind scan to find feeds. My issues start if I start a new search from scratch (Sat position is not set) and you already have a few satellites set up. Press MENU, Antenna Setup. Attached pic shows screen. First off, make the cursor start in the satellite list not the lnb control. Hitting the left arrow does not bring the cursor over, it just changes the LNB type, you have to press the EXIT button to move over to the satellite list. That wastes time to set things straight after that. The IMPORTANT feature/bug is when you scroll up/down the satellite list. As you pass over an entry, if Motor Setup is set to DiSEqc, the unit immediately moves the dish. NO! :evil: Do not send commands to dish until you select a satellite with Edit, OK, or Scan.

There are other areas of the setup where the unit has uncommanded moves of the dish. I will cover those in separate posts.
Attachments
20211206_210559.jpg
20211206_210559.jpg (481.65 KiB) Viewed 21145 times

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tom.w »

thank you very much.
we will check it.

Cluster.One
Posts: 172
Joined: Tue Jul 30, 2019 3:30 pm
Location: Italy

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Cluster.One »

I also look for feeds but I don't use DiSeqc HH,I use a polarmount with separate positioner... I'm glad our new friend has a nice spectrum analyzer... but for me the V8X is fine, make any changes you want but please be careful not to make things worse!

The only thing that I find annoying is that when I do a blind scan on a satellite then I find the channels, the V8X returns to the list of all satellites channels and not to that of the single satellite where the blindscan was made.

regards

SRT5555
Posts: 8
Joined: Tue Dec 07, 2021 1:41 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by SRT5555 »

If the blind scan has found channel(s), when I exit, it takes me to the first newly found channel. But when you do a blind scan and find NO channels, and exit, the receiver moves the dish to the last used satellite and channel. NO, it should stay still at that point.

SRT5555
Posts: 8
Joined: Tue Dec 07, 2021 1:41 am

Re: GTMEDIA_V8 Series Bug Tracking System: Dish Network Bug

Post by SRT5555 »

I think I just found a new bug/feature. I have the dish pointed at 129W and I am successfully tuned in to a transponder (image xxx_101109.jpg with the frequency of interest (FOI) highlighted). Now with the dish at 129W, almost all the signals to the right of the FOI are from the Dish Network Satellite. The blind search does NOT pick up any of the Dish Network transponders, it appears to stop at 12.2GHz. If I manually setup a transponder for the appropiate frequency and bitrate (12.297 GHZ/21500 kbps, pol same as first example, data obtained from Lyngsat for Ceil-2), I get nothing (image xxx_101228 again with the FOI highlighted). While I do not expect to view the channels, I should be able to tune in the TP. The Dish Network signal strengths are booming relative to the FTA signals. What's up with this? I like to use the Dish Network/DirevTV satellites as positional beacons.
Attachments
20211209_101109.jpg
20211209_101109.jpg (593.58 KiB) Viewed 21699 times
20211209_101228.jpg
20211209_101228.jpg (598.76 KiB) Viewed 21699 times

Post Reply

Return to “GTMEDIA V8 SERIES”