GTMEDIA_V8 Series Bug Tracking System

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Rimvis52
Posts: 8
Joined: Sun Sep 20, 2020 7:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Rimvis52 »

STRETCH wrote:
Wed Sep 30, 2020 3:05 pm
Have you set your long/lat settings into the receiver.

Den
29/5000
I tried but it doesn't help. On fixed antenna is OK, on motor antenna no signal. First line on instaliation

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GTMEDIA_V8 Series Bug Tracking System

Post by STRETCH »

What satellite are you after with your dish, can you confirm what your location is.
What is 29/5000, in your reply.

Den

DS3
Posts: 5
Joined: Mon May 04, 2020 3:05 pm
Location: NL

Re: GTMEDIA_V8 Series Bug Tracking System

Post by DS3 »

RGG1 wrote:
Sun Sep 27, 2020 3:17 am
Lining wrote:
Mon Sep 21, 2020 2:53 am
RGG1 wrote:
Sat Sep 19, 2020 8:54 pm
eumesmo wrote:
Sat Sep 19, 2020 12:54 pm
<V8PRO2> <P1><Confirmed> <SAT2IP - GT SHARE>

I've tried GTShare with V8Pro2 latest firmware 2020-09-11, GTShare finds the box on network, but when playing any channel on DVB-C (I have no DVB-S on this box) gives error "Invalid data found when processing input"

I've made some network data capture to get the address used to get channel list and stream info.
"/getallservices?id=-1&count=20&page=1"

Gives-me the channel list and stream info in JSON format.

when trying to open the stream http://V8PRO2-IP-ADDRESS:81/4427_0_-412 ... _6594_7.ts

I get this message on browser.
{"msg":"This is a test page!","resultcode":1}

Don't know if this is a problem only affecting DVB-C streams.

I have no favorites in channel list.
Hello,
It works well for me with satellite (DVB-S) but I get the same error message and it doesn't work for terrestrial (DVB-T).
BR.
We have paid attention to the problem you mentioned
Ok thank you very much.
Please see solution on : viewtopic.php?f=33&t=19805

User avatar
Feralkiwi
网站管理员
Posts: 8341
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Feralkiwi »

Rimvis52 wrote:
Wed Sep 30, 2020 6:21 am
Hello, I have problem with V8 UHD. When I switch antenna to motor, I lost signal. On fixed antenna signal is normal. Dish don't moves.
You can not use the motor dish through a switch with the UHD.
The motor controller must be connected directly with no switch.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Rimvis52
Posts: 8
Joined: Sun Sep 20, 2020 7:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Rimvis52 »

Feralkiwi wrote:
Wed Sep 30, 2020 8:54 pm
Rimvis52 wrote:
Wed Sep 30, 2020 6:21 am
Hello, I have problem with V8 UHD. When I switch antenna to motor, I lost signal. On fixed antenna signal is normal. Dish don't moves.
You can not use the motor dish through a switch with the UHD.
The motor controller must be connected directly with no switch.

Owen
About what switch you talk? About diseqc switch? And how I must commute LNB? Is this problem with this reciever? Other works normally.

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GTMEDIA_V8 Series Bug Tracking System

Post by STRETCH »

Rimvis52
How have you got your receiver set up, motor wise, (usals) or (diseq), what satellite is it you wish to receive with the motor (which you can receive on a fix dish). What part of the world are you based, have you checked your long/lat with (dishpointer).
Have you got (two) systems on the go, 1. fix dish, 2. motor.
With more information we should be able to pin point the problem.

Den

leehrat
Posts: 195
Joined: Fri Jun 30, 2017 8:07 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by leehrat »

Here is my set up and how I got it to work.
I have big dish on port 1 of 4x1 port c-band
I have little 4 foot dish on port 4 of 4x1 for ku-band.
Have to set up using fixed dish first then change to moveable dish to use.
You cannot got straight from c-band to ku-band without changing the set up each time.
The v8x works perfect but not the v8 uhd.
It is a problem but can be done but takes a lot of time.

User avatar
Feralkiwi
网站管理员
Posts: 8341
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Feralkiwi »

leehrat wrote:
Thu Oct 01, 2020 11:11 am
Here is my set up and how I got it to work.
I have big dish on port 1 of 4x1 port c-band
I have little 4 foot dish on port 4 of 4x1 for ku-band.
Have to set up using fixed dish first then change to moveable dish to use.
You cannot got straight from c-band to ku-band without changing the set up each time.
The v8x works perfect but not the v8 uhd.
It is a problem but can be done but takes a lot of time.
Remember that the moving dish MUST be on port one of the switch, as that is the default.
I also would think you need to change channel to something on port one to have that switch set before you change the menu setting to motor. Another way would be to change the LNB power to "off" and back to "on" as you change to motor.

Maybe that is the problem Rimvis52 is having.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

RGG1
Posts: 237
Joined: Tue Nov 28, 2017 3:55 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by RGG1 »

DS3 wrote:
Wed Sep 30, 2020 7:11 pm
RGG1 wrote:
Sun Sep 27, 2020 3:17 am
Lining wrote:
Mon Sep 21, 2020 2:53 am
RGG1 wrote:
Sat Sep 19, 2020 8:54 pm
eumesmo wrote:
Sat Sep 19, 2020 12:54 pm
<V8PRO2> <P1><Confirmed> <SAT2IP - GT SHARE>

I've tried GTShare with V8Pro2 latest firmware 2020-09-11, GTShare finds the box on network, but when playing any channel on DVB-C (I have no DVB-S on this box) gives error "Invalid data found when processing input"

I've made some network data capture to get the address used to get channel list and stream info.
"/getallservices?id=-1&count=20&page=1"

Gives-me the channel list and stream info in JSON format.

when trying to open the stream http://V8PRO2-IP-ADDRESS:81/4427_0_-412 ... _6594_7.ts

I get this message on browser.
{"msg":"This is a test page!","resultcode":1}

Don't know if this is a problem only affecting DVB-C streams.

I have no favorites in channel list.
Hello,
It works well for me with satellite (DVB-S) but I get the same error message and it doesn't work for terrestrial (DVB-T).
BR.
We have paid attention to the problem you mentioned
Ok thank you very much.
Please see solution on : viewtopic.php?f=33&t=19805
Hello,
Excellent contribution, thank you very much for sharing. Removing the minus sign, DVB-T terrestrial channels work perfectly.
BR.

mindrover
Posts: 9
Joined: Tue Jun 27, 2017 1:55 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by mindrover »

Hello,
Is there a way to add PV or BISS keys manually on the V8UHD?

mindrover

mindrover
Posts: 9
Joined: Tue Jun 27, 2017 1:55 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by mindrover »

Never mind -- Found it.

NETWORK section --- settings --- configuration ---- and press the number 6 key four times.

mindrover

Gla
Posts: 15
Joined: Fri Aug 12, 2016 9:21 am
Location: Blantyre, Malawi
Contact:

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Gla »

These are are not bugs but simply requests.
1. Is is possible to put a setting where one chooses which format to record whether in TS or MEPG according to your wish and space that you have in your flash.
2. I was hunting satellites without exact frequency. the decoder worked as a good satellite finder. Anywhere there is a satellite the signal strength was up and when you blindscan there were some frequencies coming. Is it possible to make show you that this is data frequency. I got many frequencies than ever before on some satellites but was not happy because there were no channels. I can not say it was an error because other decoder got the same number of channels but fewer frequencies. I wished if it had bitten the other decoder in channels number too.
FAVOURED AND BEAUTIFUL

Sandro402010
Posts: 25
Joined: Thu Aug 27, 2020 6:42 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Sandro402010 »

Tengo V8X y es un espectáculo para configurar antenas banda C con motor....Pero el V8UHD está muy crudo,lento,y para configurar antena con Motor en banda C en sistema Diseq1.2 es imposible..esta todo muy entreverado y las configuraciones de puertos y lnb multi y mono esta imposible en sistema diseq 1.2,seria bueno usar el mismo sistema que en el V8X...FELICITACIONES POR EL TRABAJO

Sandro402010
Posts: 25
Joined: Thu Aug 27, 2020 6:42 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Sandro402010 »

Tengo V8X y es un espectáculo para configurar antenas banda C con motor....Pero el V8UHD está muy crudo,lento,y para configurar antena con Motor en banda C en sistema Diseq1.2 es imposible..esta todo muy entreverado y las configuraciones de puertos y lnb multi y mono esta imposible en sistema diseq 1.2,seria bueno usar el mismo sistema que en el V8X...FELICITACIONES POR EL TRABAJO

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

Sandro402010 wrote:
Fri Oct 09, 2020 12:46 am
Tengo V8X y es un espectáculo para configurar antenas banda C con motor....Pero el V8UHD está muy crudo,lento,y para configurar antena con Motor en banda C en sistema Diseq1.2 es imposible..esta todo muy entreverado y las configuraciones de puertos y lnb multi y mono esta imposible en sistema diseq 1.2,seria bueno usar el mismo sistema que en el V8X...FELICITACIONES POR EL TRABAJO
Yes, we are working on this.
Please be patient.
Thanks.

Jdfsistems
Posts: 1
Joined: Fri Oct 09, 2020 1:22 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Jdfsistems »

Hi, I have a problem with my cable box. I have added several accounts in the newcam protocol for three different satellites which are the 61w, 70w, 81w.

All perfect on the 61w satellite, but when placing a 70w channel it is not seen, and I must go to the menu and deactivate the newcam accounts of the others to be able to see those channels and I must do so every time I change the channel and it is from a different satellite.

Is there a way that it will automatically take the corresponding protocol from the satellite?

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

Jdfsistems wrote:
Fri Oct 09, 2020 1:35 pm
Hi, I have a problem with my cable box. I have added several accounts in the newcam protocol for three different satellites which are the 61w, 70w, 81w.

All perfect on the 61w satellite, but when placing a 70w channel it is not seen, and I must go to the menu and deactivate the newcam accounts of the others to be able to see those channels and I must do so every time I change the channel and it is from a different satellite.

Is there a way that it will automatically take the corresponding protocol from the satellite?
Probably some newcam accounts were sending the fake keys, the fake keys will overwrite the correct keys.

Sandro402010
Posts: 25
Joined: Thu Aug 27, 2020 6:42 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Sandro402010 »

V8UHD con bug en antena motorizada en función motor diseq 1.2 pierde configuración cuando apagado el equipo....prendes el equipo y no funciona si lo entras al menú y cambias Antena fija seleccionas el sat y luego sales y cambias para antena motor....cada vez ese procedimiento está insoportable...cualquier duda díganme com.subir un video....tengo antena fibra 3.20m ...
Sin embargo el V8X FUNCIONA PERFECTO LA FUNCION ANTANA MOTOTIZADA EN DISEQ 1.2...

Sandro402010
Posts: 25
Joined: Thu Aug 27, 2020 6:42 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Sandro402010 »

Se agradece si contestan una triste publicación.. gracias...

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by cpr43 »

Sandro402010 wrote:
Mon Oct 12, 2020 2:58 pm
Se agradece si contestan una triste publicación.. gracias...
Ya tristemente te contestaron arriba. ;)

Code: Select all

Sandro402010 wrote: ↑Thu Oct 08, 2020 7:46 pm
Tengo V8X y es un espectáculo para configurar antenas banda C con motor....Pero el V8UHD está muy crudo,lento,y para configurar antena con Motor en banda C en sistema Diseq1.2 es imposible..esta todo muy entreverado y las configuraciones de puertos y lnb multi y mono esta imposible en sistema diseq 1.2,seria bueno usar el mismo sistema que en el V8X...FELICITACIONES POR EL TRABAJO

Yes, we are working on this.
Please be patient.
Thanks.

Sandro402010
Posts: 25
Joined: Thu Aug 27, 2020 6:42 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Sandro402010 »

Sorry I had not seen that they had answered me ... for us Hispanics Latinos, English kills us ... sorry

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by cpr43 »

Sandro402010 wrote:
Mon Oct 12, 2020 4:44 pm
Sorry I had not seen that they had answered me ... for us Hispanics Latinos, English kills us ... sorry
Puedes darle seguimiento @alex.c por mensaje privado si gustas.

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tom.w »

Sandro402010 wrote:
Mon Oct 12, 2020 4:44 pm
Sorry I had not seen that they had answered me ... for us Hispanics Latinos, English kills us ... sorry
About desiqc1.2/Motor, we are designing this feature as the same as v8x.
So please wait for a while.

ameca73
Posts: 3
Joined: Fri Aug 12, 2016 2:11 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by ameca73 »

alguien sabe las llaves para galaxy 16 tp 3940h 34284 son llaves director

Rimvis52
Posts: 8
Joined: Sun Sep 20, 2020 7:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Rimvis52 »

Tom.w wrote:
Tue Oct 13, 2020 2:02 pm
Sandro402010 wrote:
Mon Oct 12, 2020 4:44 pm
Sorry I had not seen that they had answered me ... for us Hispanics Latinos, English kills us ... sorry
About desiqc1.2/Motor, we are designing this feature as the same as v8x.
So please wait for a while.
Will this solve the problem of that diseqc relay on dish lost signal when I switch on diseqc 1.2 from fixed antenna?

Post Reply

Return to “GTMEDIA V8 SERIES”