GTMEDIA_V8 Series Bug Tracking System

[vaxi]

Is there reported bug like mine ?
when i record program, when i play it,record jump for 5-10sec every 2-3 minutes

[David61622]

¿Le tienes puesto alguna memoria externa?, Disco duro, o un USB?

Saludos

[vaxi]

8GB USB by Bosch

[lilimar]

GT Media V8 X solo deja usar una cuenta Newcamd a la vez.
Ejemplo si tengo varias cuentas Newcamd cargadas al equipo 61w / 70w / 81w solo puedo usar un satélite.
Si cambio de un satélite a otro debo desactivar las otras cuentas Newcamd en el equipo para que me abra los canales del otro satélite.
Ojalá puedan solucionar ese error con los próximos Software

[Rendon1980]

Mismo problemas men del v8x.

[mengelle]

Hi, I just got a gtmedia v8pro2 that's having trouble starting up. When you connect the device to the power it shows the message "boot" and then it passes a number of random numbers through the LCD screen, and then returns to the boot message. This loop never ends.

I tried to place the update file renamed to flash.bin on a USB and then start the receiver by pressing the menu button on the remote control and proceed to perform the USB update. But once finished, it returns to the error loop.

Could you help me, I am extremely frustrated with this.

Thank you and greetings

[Feralkiwi]

Hi, I just got a gtmedia v8pro2 that's having trouble starting up. When you connect the device to the power it shows the message "boot" and then it passes a number of random numbers through the LCD screen, and then returns to the boot message. This loop never ends.

I tried to place the update file renamed to flash.bin on a USB and then start the receiver by pressing the menu button on the remote control and proceed to perform the USB update. But once finished, it returns to the error loop.

Could you help me, I am extremely frustrated with this.

Thank you and greetings

Try booting with the LNB cable disconnected. You may have a short.

Do you see anything on the TV?

Owen

[mengelle]

I tried without lnb connected, same problem. With the power supply the V8 Finder which is the same as the one that comes with the v8pro2 and remains the same.

On the TV it shows the messages "no signal" and "mode not compatible" intermittently

[Feralkiwi]

Check your HDMI cable. The mode not compatible and no signal are from your TV.
Your TV is not getting a video signal.

Try booting with the TV not connected.

The number on the display of the box should be like: Boot, L002, L050, L097 etc.. This means boot and then loading.

Check you have done you flash.bin correctly.

Owen

flash.bin recovery is done like this.

Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.

Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.

I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.

Try even older software as the file for flash.bin.

Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.

Good luck

New information: Users are reporting that naming the file "Flash.bin" with a capital has worked where "flash.bin" has not.

[juan_vale]

I am having an issue with my V8UHD that I just got with the autoroll on 116.8, 4017 H 23200, it loads three of the channels, but does not load the 4th, it doesn't pick it up encryption type just ? in the info bar. Also have an issue on 3968 V 7500, shows as FTA, but when it does load it loads audio and displays "scrambled" message and does not roll.

The info on Lyngsat is out of date. This is how the 4017H23200 transponder looks today >>

Code: Select all

CHANNEL		  SID	ENCRYPTION
CLARO SPORTS	   1	BISS
CONCERT CHANNEL	   2	BISS
CANAL CLARO	   3	CRYPTOGUARD
CLARO CINEMA	   4	BISS
NUESTRA VISION	   5	FTA
CLARO SPORT	   6	CRYPTOGUARD
CLARO SPORT	   7	CRYPTOGUARD

[Lining]

1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.

》》》》》》》》》》What PID to edit? Why is it 5 numbers? The maximum value of PID does not exceed 8191

2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?

》》》》》》》》》》Your suggestion is good. If there is EPG information, press INFO twice to display the EPG？

[Eusebio20]

GT Media V8 X solo deja usar una cuenta Newcamd a la vez.
Ejemplo si tengo varias cuentas Newcamd cargadas al equipo 61w / 70w / 81w solo puedo usar un satélite.
Si cambio de un satélite a otro debo desactivar las otras cuentas Newcamd en el equipo para que me abra los canales del otro satélite.
Ojalá puedan solucionar ese error con los próximos Software

Amigo ,Buenos Dias, con el ultimo bin se soluciona el problema que estas mencionado, yo tengo un servidor con los 3 satelites que tu mencionas y con el ultimo bin, funciona de maravilla, tengo los 3 servidores en simultaneo y funciona perfectamente

Saludos

[lilimar]

Te funciona por que es un server multisat, pero si le pones server diferente para cada satélite te va presentar el problema

[alex.c]

Te funciona por que es un server multisat, pero si le pones server diferente para cada satélite te va presentar el problema

If you can give me your accounts, I can check if I can fix it.
Thank you.

[lilimar]

Dame un Email y te paso cuentas Newcamd por separado para cada satélite, y así ver si se puede solucionar el problema

[alex.c]

Dame un Email y te paso cuentas Newcamd por separado para cada satélite, y así ver si se puede solucionar el problema

You can send me a PM, friend.
And please describe the issue again.
Thank you.

[Godwin]

please can it work with all cards ?

[David61622]

Hola, comento que el último firmware para el V8 UHD funciona mejor que el anterior, de echo la línea cccam a cogido a la 1° , de echo he puesto incluso una lista de canales creada, más a delante pondré más impresiones.

[przeeemek1]

1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.

》》》》》》》》》》What PID to edit? Why is it 5 numbers? The maximum value of PID does not exceed 8191

2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?

》》》》》》》》》》Your suggestion is good. If there is EPG information, press INFO twice to display the EPG？

Yes. I can see what is NOW after press INFO twice. But I can not read information about NEXT film at this same program.
This is how it works on many devices from other manufacturers.

Where can I find "PCR PID"? I can not find some chanels from hotbird 13E, transponder 11662 v 27500.

[iq180]

Is there any way to put the same menu setup on the V8-UHD that's on the V8X,?????

[alex.c]

Is there any way to put the same menu setup on the V8-UHD that's on the V8X,?????

Yes.
We will try the best to porting the good function of V8X to V8UHD.

[cpr43]

Is there any way to put the same menu setup on the V8-UHD that's on the V8X,?????

Yes.
We will try the best to porting the good function of V8X to V8UHD.

Very good idea!!!

[betnar93]

Wifi doesn't work. Bug is in 206 and 209 firmware. This is the error I get. Any suggestions?

[Lining]

Wifi doesn't work. Bug is in 206 and 209 firmware. This is the error I get. Any suggestions?

Hello, please check your WIFI password input is correct, if the WIFI password input is wrong. Will prompt the connection timeou

[Slavkov]

V8 UHD
Not a bug, but what about implementation of the Czech language as value of selection First / Second Audio...
Or may be complete Language of menu...