GTMEDIA_V8 Series Bug Tracking System

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

Please moderator edit this post to collect the issues
--------------------------------------------------------------------------------------------------------------------------
template:
<Unit> <Priority> <Status> <Name> <Description>

--------------------------------------------------------------------------------------------------------------------------
<V8X> <P1><Repair > <WiFi disconnection> Box hungs when disconnecting WIFI

<V8X> <P1><Repaired> <Two PVR issues ID:3230> https://www.freesat.cn/forum/viewtopic.php?p=78473#p78473

<V8X> <P1><Repaired> <EPG issues ID:3250> https://www.freesat.cn/forum/viewtopic.php?p=78744#p78744

<V8UHD> <P1><Repaired V207> <Two UI improvements ID:3133..> https://www.freesat.cn/forum/viewtopic.php?p=78546#p78546

<V8UHD> <P1><Confirmed> <AutoBiss message show untimely ID:3402> https://www.freesat.cn/forum/viewtopic.php?p=78799#p78799

<V8UHD> <P1><Repaired V210> <More UI improvments ID:3091> https://www.freesat.cn/forum/viewtopic.php?p=78832#p78832

--------------------------------------------------------------------------------------------------------------------------
<V8X> <P1><Not reproduced> <No Signal> Unit going to No Signal- No Quality when using tone (22K) switches/https://www.freesat.cn/forum/viewtopic.php?f=33&t=19024&p=78688#p78688

<V8X &? Nova> <P2><Confirmed> <Flash.bin ID:3249> flash.bin recovery only works with capital "F"<Feralkiwi>/ https://www.freesat.cn/forum/viewtopic.php?f=33&t=19024&p=78688#p78688

<V8UHD> <P2><Repaired V212> <T2 channel missed when scanning ID:3236> https://www.freesat.cn/forum/viewtopic.php?p=78565#p78565
--------------------------------------------------------------------------------------------------------------------------
<V8UHD> <P2><Repaired V210> <System Setup- Local time setting ID:3196>Fits Regions presets to show United States West-Central & Eastern region times

<V8X/V8Nova/V8Super> <P1><confirmed> <DB Dump ID:3185> DB.bin (not DB + Data.bin) dumps private information eg C-Lines, N-Lines, WIFI SSID + Password
https://www.freesat.cn/forum/viewtopic.php?f=33&t=19157, https://www.freesat.cn/forum/viewtopic.php?f=33&t=19058


<V8UHD> <Closed><User was using DiSEqC 1.1 on 1.0 switch> <DiSEqC 1.1 not work with PLSN option "ON"><Feralkiwi>https://www.freesat.cn/forum/viewtopic.php?f=33&t=19195&p=80023&hilit=plsn#p80023

<V8UHD> <P1><Closed:Repaired by V209><Auto TP Update causing crash> <Mass changes made using editor and reloaded, Auto TP update caused crash><Feralkiwi>https://www.freesat.cn/forum/viewtopic.php?f=33&t=19184&p=81495&hilit=updating#p81495

<V8UHD?> <P2><Confirmed> <Arabic language setting reverses channel names and does not translate Provider etc on channel list https://https://www.freesat.cn/forum/viewtopic.php?f=33&t=20051

<V8X?> <P2><Confirmed> <if you add a new satellite it does not accomodate in the right satellite location or if you load a User Database the V8X creates a mess and all satellites gets scrambled out of place when you hit the SAT boton. They do not stay organized.>

<V8UHD?> <P1><Confirmed> <With a weak UHF signal and a breaking video, changing channel back to satellite results in "No Signal" I recreated the same fault Feralkiwi, https://www.freesat.cn/forum/viewtopic.php?f=33&t=20651&p=87884#p87884

<V8UHD?> <P2><Three reports> <The UHD does not allow for other HDMI connections to work, like sound bars, while the V8Pro2 does work. compatibility problems on the HDMI ARC. Feralkiwi, https://www.freesat.cn/forum/viewtopic.php?f=33&t=19566&p=87887#p87887

<V8Nova, V8X> <P2><Confirmed> <Add delete multiple/ all or deselect channels option.>https://www.freesat.cn/forum/viewtopic.php?f=33&p=88035#p88035

<V8UHD> <P1><Confirmed> <V8UHD Rebooting during Blind Scan>https://www.freesat.cn/forum/viewtopic.php?f=33&t=20348

<V8X> <P1><Confirmed> <If you set LNB power to "OFF" and power off / on, channels have good signal / quality but no video. Correction, not multistream. Any channel that is on Vertical polarity. Tested by changing TPs from H to V and fault moved to those channels on V.>Feralkiwi, https://www.freesat.cn/forum/viewtopic.php?f=33&t=20660
Solved with V8X 07 Dec 20202 software.


Dec 19 2021<V8X> <P1><Confirmed> <DiSEqC switch port resend on "No Signal" stopping motor control menu use>Feralkiwi, https://www.freesat.cn/forum/viewtopic.php?f=33&t=19024&p=107324&hilit=Null#p107324 reported by user SRT5555

ameenjuz
Posts: 183
Joined: Sat Feb 15, 2020 11:11 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by ameenjuz »

Box hungs when disconnecting WIFI on V8 Nova Blue too and do not disconnect the wifi

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

ameenjuz wrote:
Thu Jul 09, 2020 1:29 pm
Box hungs when disconnecting WIFI on V8 Nova Blue too and do not disconnect the wifi
Yes, you are right.
It will be fixed in next firmware.

Tasss
Posts: 151
Joined: Fri Apr 12, 2019 2:03 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tasss »

Buenos días os cuento mis experiencia con decodificador v8x:
Cosas positivas:
Rapidez muy buena en cambio de canales y acceso a los menús y calidad de imagen también mejor que antiguos decodificadores.
El mando a distancia su rango de actualización es muy débil los antiguos mandos van mejor.

Errores detectados y graves:
Con el ultimo firmware puesto estan echas estas pruebas, si añades una linea cccam y te equivocas en ponerla la guardas y como te has equivocado como es normal te da idel, la editas y la pones bien guardas la línea pero el deco sigue diciendo idel que no es así, la única forma de que esto se soluciones es borrar dicha línea y volver ha meter.

Otro error que sucede lineas en ecm listo, verificado por wifi y rj45, no abre los canales y comprobado que el deco tiene Internet tanto por wifi o por rj45, esto es muy grave y en los canales no sale el cartel de canal codificado, solución de este error volver a restaurar de fabrica y volver ha meter todo al deco.

Otro error con 4 lineas activas y quieres desactivar alguna no solo se desactiva la que tu quieres sino que se desactiva otras que ni has tocado, de las 4 lineas.

Otro error por algún motivo se te va la luz en casa el decodificador cuando se vuelve ha restablecer y ha arrando antes que tu router, el decodificador cuando ya tiene wifi se conecta tiene Internet perfecto las lineas están todas en ecm listo y mismo problema no abre ningún canal y no da canal codificado, ya puedes desconectar wifi conectar rj45 y el decodificador verificado que le llega Internet con ping, y siguen los canales codificados y sin salir el cartel de canal codificado, solución para esto también restablecer de fabrica y empezar de nuevo.

Otro error que no siempre lo hace, apagas el decodificador con el mando lo vuelves ha encender y arranca se conecta al wifi y en la pantalla aparece un cartel de "bisautorroll conectado espere por favor" le tienes que dar al ok del cartel porque se queda hay esperando eternamente, aquí tampoco abre los canales no sale el cartel de canal codificado y miras las lineas y están ecm listo. Solución de esto lo mismo que siempre restablecer de fabrica y volver a meter todo.

Todas estas pruebas están realizadas en astra España.
Gracias un saludo y tengan buen día.
Last edited by Tasss on Tue Jul 14, 2020 8:20 pm, edited 1 time in total.

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

Tasss wrote:
Sun Jul 12, 2020 8:07 am
Buenos días os cuento mis experiencia con decodificador v8x:
Cosas positivas:
Rapidez muy buena en cambio de canales y acceso a los menús y calidad de imagen también mejor que antiguos decodificadores.
El mando a distancia su rango de actualización es muy débil los antiguos mandos van mejor.

Errores detectados y graves:
Con el ultimo firmware puesto estan echas estas pruebas, si añades una linea cccam y te equivocas en ponerla la guardas y como te has equivocado como es normal te da idel, la editas y la pones bien guardas la línea pero el deco sigue diciendo idel que no es así, la única forma de que esto se soluciones es borrar dicha línea y volver ha meter.

Otro error que sucede lineas en ecm listo, verificado por wifi y rj45, no abre los canales y comprobado que el deco tiene Internet tanto por wifi o por rj45, esto es muy grave y en los canales no sale el cartel de canal codificado, solución de este error volver a restaurar de fabrica y volver ha meter todo al deco.

Otro error con 4 lineas activas y quieres desactivar alguna no solo se desactiva la que tu quieres sino que se desactiva otras que ni has tocado, de las 4 lineas.

Otro error por algún motivo se te va la luz en casa el decodificador cuando se vuelve ha restablecer y ha arrando antes que tu router, el decodificador cuando ya tiene wifi se conecta tiene Internet perfecto las lineas están todas en ecm listo y mismo problema no abre ningún canal y no da canal codificado, ya puedes desconectar wifi conectar rj45 y el decodificador verificado que le llega Internet con ping, y siguen los canales codificados y sin salir el cartel de canal codificado, solución para esto también restablecer de fabrica y empezar de nuevo.

Otro error que no siempre lo hace, apagas el decodificador con el mando lo vuelves ha encender y arranca se conecta al wifi y en la pantalla aparece un cartel de "bisautorroll conectado espere por favor" le tienes que dar al ok del cartel porque se queda hay esperando eternamente, aquí tampoco abre los canales no sale el cartel de canal codificado y miras las lineas y están ecm listo. Solución de esto lo mismo que siempre restablecer de fabrica y volver a meter todo.

Bueno hay tienen material para solucionar problemas esto son bastantes graves. Todas estas pruebas están realizadas en astra España.
Gracias un saludo y tengan buen día.
Thank you for your report, sir.
Sorry, I can't clearly understand what you said. But I try to repeat them.

1. When you input a wrong account, you want to know the reason.
If the username and password are error, or the network connect failed.
This is a good idea, we will try to implement it.

2. You mean you have a cccam line, and it shows ECM Ready.
But you can't decode some channels, right?
There are many reason can make this happen, but maybe you need the "Skip CW checksum" option?

3. You mean you have 4 cccam lines, but when you turn off one of them, all of 4 lines were off.
Ok, I will check this.

4. Sorry, I really can't undersand.
Please explain more, thank you.

5. You mean you turn off the box by remote contol and then turn it on.
Sometimes the "Autobiss Calculating" message appeared but this channel is not a BISS channel, right?
OK, we will do more test about this.

Tasss
Posts: 151
Joined: Fri Apr 12, 2019 2:03 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tasss »

2. No todas las lineas en ecm listo y ningún canal se abre y probrado la opción Skip CW checksum.
4. Te explico si el decodificador esta conectado por wifi y el router esta apagado en ese momento, enciendes el router y el decodificador debería reconocer la Red y conectarse automáticamente, el decodificador se conecta al router y las lineas todas en ecm listo y canales cerrados, ya puedes desatactivar wifi y activar rj45 que sigue todas las lineas en ecm listo y canales cerrados.
5. Exacto no es biss, por eso mi sorpresa que haga esto y el decodificador ya no abre ningun canal, teniendo las lineas ecm listo y internet funciona.
No hay manera que vuelva abrir canales sino se restaura de fábrica y volver a meter todo.

Por mi parte creo que todos los problemas vienen por la parte nueva que estáis implementando en la parte de meter cccam etc... protocolo cs

Slavisa
Posts: 28
Joined: Fri Dec 27, 2019 11:42 pm
Location: Serbia

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Slavisa »

On V8PRO2 (S/W 16.06.2020) when I turn it off remotely and when I turn it on again there is no internet connection. The box is connected by cable to the internet. In the network config, when I try to turn on the LAN, the message "Internet device not insert!" appears. Only after unplugging the internet cable from the box and reconnecting it to the box does the internet work.

User avatar
owhite47
Posts: 64
Joined: Sat Jan 13, 2018 2:10 am

v8x

Post by owhite47 »

Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch. Dont have a switch just a 4x4 one half tone the other half normal. tone is cband tone off is ku
Last edited by owhite47 on Wed Jul 15, 2020 9:41 am, edited 1 time in total.
10.5 cband western arc 75deg to 139deg. 4ft ku with motor, full western arc.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8x

Post by Feralkiwi »

owhite47 wrote:
Sun Jul 12, 2020 7:30 pm
Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch.
Check that you do not have a short and that the LNB power is set to "ON".

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

Tasss wrote:
Sun Jul 12, 2020 3:44 pm
2. No todas las lineas en ecm listo y ningún canal se abre y probrado la opción Skip CW checksum.
4. Te explico si el decodificador esta conectado por wifi y el router esta apagado en ese momento, enciendes el router y el decodificador debería reconocer la Red y conectarse automáticamente, el decodificador se conecta al router y las lineas todas en ecm listo y canales cerrados, ya puedes desatactivar wifi y activar rj45 que sigue todas las lineas en ecm listo y canales cerrados.
5. Exacto no es biss, por eso mi sorpresa que haga esto y el decodificador ya no abre ningun canal, teniendo las lineas ecm listo y internet funciona.
No hay manera que vuelva abrir canales sino se restaura de fábrica y volver a meter todo.

Por mi parte creo que todos los problemas vienen por la parte nueva que estáis implementando en la parte de meter cccam etc... protocolo cs
1. We will add this new feature.
2. This really depends on your cccam account, it's complex. I can't say what's wrong. I you want, you can record the TS file, and give us your account. I can test it.
3. I tested just now it works correctly.
4. This situation is really rare.
5. Please tell the TP information of longitude/frequency/sid. So we can test.
The CS protocol of V8X is just the same as other units, not new implemented.
Thank you.

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: v8x

Post by cpr43 »

owhite47 wrote:
Sun Jul 12, 2020 7:30 pm
Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch.
Already added the bug for evaluation. It does happens to me also with my V8X

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8x

Post by Feralkiwi »

owhite47 wrote:
Sun Jul 12, 2020 7:30 pm
Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch.
Please remember that you can not use a 22khz tone switch before any DiSEqC switches or a universal LNB.
The instructions to the DiSEqC switches are sent by turning the 22kHz tone on / off in a digital pattern.
If you have a 22kHz switch first this diverts the power from port to port with every pulsed instruction bit.

If you tuen 22kHz "ON" with a universal LNB then it will only use the upper band half.
For universal LNB's use the LNB setting of 9750/10600, or if you only require the upper band use 10600 and 22kHz "ON".

Please is this what you have done?

I have a satellite set with DiSEqC 1.1 port 5 / DiSEqC 1.0 port 1 / 22kHz tone on and it works fine. (twin LNB with one LNB using 22kHz "ON".)
cpr43 wrote:
Mon Jul 13, 2020 1:44 am
owhite47 wrote:
Sun Jul 12, 2020 7:30 pm
Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch.
Already added the bug for evaluation. It does happens to me also with my V8X

Please crp43. How were you set up for this test?

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by cpr43 »

Owen

I didnt run a test. It happens to me before and thought it was something wrong on my setup so I did not mentioned. But, now I see another members have mentioned the same or similar. I have used for a very long time a 4 X 4 switch. I have a C band 10 footer with a dual output LNB. I have a small dish for Ku band with a double output LNB. Both LNBs feed to the 4 X 4 switch. The 4 X 4 switch feeds 2 coax lines to 2 different locations in the house. The Ku band is in the 22K ON side. Some times when I was using Ku band (22K/ON) and changed to the C band (22K/OFF) the V8X went to NO SIGNAL NO QUALITY 0%/0%. So I needed to turn off wait sometime and turn back on to reset and get signal again. (problem did not happens with other models).

Regards

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: v8x

Post by alex.c »

Feralkiwi wrote:
Mon Jul 13, 2020 2:31 am
owhite47 wrote:
Sun Jul 12, 2020 7:30 pm
Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch.
Please remember that you can not use a 22khz tone switch before any DiSEqC switches or a universal LNB.
The instructions to the DiSEqC switches are sent by turning the 22kHz tone on / off in a digital pattern.
If you have a 22kHz switch first this diverts the power from port to port with every pulsed instruction bit.

If you tuen 22kHz "ON" with a universal LNB then it will only use the upper band half.
For universal LNB's use the LNB setting of 9750/10600, or if you only require the upper band use 10600 and 22kHz "ON".

Please is this what you have done?

I have a satellite set with DiSEqC 1.1 port 5 / DiSEqC 1.0 port 1 / 22kHz tone on and it works fine. (twin LNB with one LNB using 22kHz "ON".)
cpr43 wrote:
Mon Jul 13, 2020 1:44 am
owhite47 wrote:
Sun Jul 12, 2020 7:30 pm
Doesn't recieve signal from satellite dish, nor does emit a tone to switch between satellites with a 22k tone switch.
Already added the bug for evaluation. It does happens to me also with my V8X

Please crp43. How were you set up for this test?

Owen
Yes, you can't place a DiSEqC behind the 22K ON port of a 22k tone switch.
Because the 22K waveform will override the waveform of DiSEqC.

User avatar
Lining
网站管理员
Posts: 1169
Joined: Thu Aug 11, 2016 11:14 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Lining »

<V8X &? Nova> <P2><Confirmed> <Flash.bin> flash.bin recovery only works with capital "F"<Feralkiwi>
I tested Flash.bin, "F" is capitalized, my forced upgrade is OK, who can send an unrecognized "F" file to me
TIM截图20200713194619.jpg
TIM截图20200713194619.jpg (2.2 KiB) Viewed 66564 times
FREESAT brand change GT MEDlA

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Feralkiwi »

Lining wrote:
Mon Jul 13, 2020 12:02 pm
<V8X &? Nova> <P2><Confirmed> <Flash.bin> flash.bin recovery only works with capital "F"<Feralkiwi>
I tested Flash.bin, "F" is capitalized, my forced upgrade is OK, who can send an unrecognized "F" file to me
TIM截图20200713194619.jpg
The last post on this issue was here.

Another here, this one on the V8 Nova.

And another here, again on the nova.


Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Tasss
Posts: 151
Joined: Fri Apr 12, 2019 2:03 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tasss »

alex.c wrote:
Sun Jul 12, 2020 1:51 pm
Tasss wrote:
Sun Jul 12, 2020 8:07 am
Buenos días os cuento mis experiencia con decodificador v8x:
Cosas positivas:
Rapidez muy buena en cambio de canales y acceso a los menús y calidad de imagen también mejor que antiguos decodificadores.
El mando a distancia su rango de actualización es muy débil los antiguos mandos van mejor.

Errores detectados y graves:
Con el ultimo firmware puesto estan echas estas pruebas, si añades una linea cccam y te equivocas en ponerla la guardas y como te has equivocado como es normal te da idel, la editas y la pones bien guardas la línea pero el deco sigue diciendo idel que no es así, la única forma de que esto se soluciones es borrar dicha línea y volver ha meter.

Otro error que sucede lineas en ecm listo, verificado por wifi y rj45, no abre los canales y comprobado que el deco tiene Internet tanto por wifi o por rj45, esto es muy grave y en los canales no sale el cartel de canal codificado, solución de este error volver a restaurar de fabrica y volver ha meter todo al deco.

Otro error con 4 lineas activas y quieres desactivar alguna no solo se desactiva la que tu quieres sino que se desactiva otras que ni has tocado, de las 4 lineas.

Otro error por algún motivo se te va la luz en casa el decodificador cuando se vuelve ha restablecer y ha arrando antes que tu router, el decodificador cuando ya tiene wifi se conecta tiene Internet perfecto las lineas están todas en ecm listo y mismo problema no abre ningún canal y no da canal codificado, ya puedes desconectar wifi conectar rj45 y el decodificador verificado que le llega Internet con ping, y siguen los canales codificados y sin salir el cartel de canal codificado, solución para esto también restablecer de fabrica y empezar de nuevo.

Otro error que no siempre lo hace, apagas el decodificador con el mando lo vuelves ha encender y arranca se conecta al wifi y en la pantalla aparece un cartel de "bisautorroll conectado espere por favor" le tienes que dar al ok del cartel porque se queda hay esperando eternamente, aquí tampoco abre los canales no sale el cartel de canal codificado y miras las lineas y están ecm listo. Solución de esto lo mismo que siempre restablecer de fabrica y volver a meter todo.

Bueno hay tienen material para solucionar problemas esto son bastantes graves. Todas estas pruebas están realizadas en astra España.
Gracias un saludo y tengan buen día.
Thank you for your report, sir.
Sorry, I can't clearly understand what you said. But I try to repeat them.

1. When you input a wrong account, you want to know the reason.
If the username and password are error, or the network connect failed.
This is a good idea, we will try to implement it.

2. You mean you have a cccam line, and it shows ECM Ready.
But you can't decode some channels, right?
There are many reason can make this happen, but maybe you need the "Skip CW checksum" option?

3. You mean you have 4 cccam lines, but when you turn off one of them, all of 4 lines were off.
Ok, I will check this.

4. Sorry, I really can't undersand.
Please explain more, thank you.

5. You mean you turn off the box by remote contol and then turn it on.
Sometimes the "Autobiss Calculating" message appeared but this channel is not a BISS channel, right?
OK, we will do more test about this.

Todos los problemas resueltos de momento todo perfecto y muy buen decodificador lo recomiendo.
Muchas gracias a Alex.c.
Gracias un saludo.

User avatar
owhite47
Posts: 64
Joined: Sat Jan 13, 2018 2:10 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by owhite47 »

I don't have a disqc switch, just a 22k tone switch , on for cband off for ku

10ft cband western arc
4ft ku motorized western arc.
v7hd works fine
3v8novas works fine
XXXXX works fine
XXXXX work fine.

same room same cable.

no matter how long i leave it off it doesn't have a signal.

我沒有 disqc 開關, 只是一個 22k 音開關, 為 ku 關閉 cband

10 英尺 cband 西弧
4 英尺 ku 機動西弧。
v7hd 工作正常
3v8novas 工作正常
XXXXX 工作正常
XXXXX 工作正常。

同一房間相同的電纜。

無論我離開多久, 它也沒有信號。

Edit by the rule.
10.5 cband western arc 75deg to 139deg. 4ft ku with motor, full western arc.

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

owhite47 wrote:
Wed Jul 15, 2020 9:45 am
I don't have a disqc switch, just a 22k tone switch , on for cband off for ku

10ft cband western arc
4ft ku motorized western arc.
v7hd works fine
3v8novas works fine
XXXXX works fine
XXXXX work fine.

same room same cable.

no matter how long i leave it off it doesn't have a signal.

我沒有 disqc 開關, 只是一個 22k 音開關, 為 ku 關閉 cband

10 英尺 cband 西弧
4 英尺 ku 機動西弧。
v7hd 工作正常
3v8novas 工作正常
XXXXX 工作正常
XXXXX 工作正常。

同一房間相同的電纜。

無論我離開多久, 它也沒有信號。

Edit by the rule.
I have no idea about this issue.
Does anybody have this issue too?

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by cpr43 »

alex.c wrote:
Wed Jul 15, 2020 10:57 am
owhite47 wrote:
Wed Jul 15, 2020 9:45 am
I don't have a disqc switch, just a 22k tone switch , on for cband off for ku

10ft cband western arc
4ft ku motorized western arc.
v7hd works fine
3v8novas works fine
XXXXX works fine
XXXXX work fine.

same room same cable.

no matter how long i leave it off it doesn't have a signal.

我沒有 disqc 開關, 只是一個 22k 音開關, 為 ku 關閉 cband

10 英尺 cband 西弧
4 英尺 ku 機動西弧。
v7hd 工作正常
3v8novas 工作正常
XXXXX 工作正常
XXXXX 工作正常。

同一房間相同的電纜。

無論我離開多久, 它也沒有信號。

Edit by the rule.
I have no idea about this issue.
Does anybody have this issue too?
It is reported. Happens to me as well

<V8X> <P1><New> <No Signal> Unit going to No Signal- No Quality when using tone (22K) switches/viewtopic.php?f=33&t=19024&p=78688#p78688

Tasss
Posts: 151
Joined: Fri Apr 12, 2019 2:03 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tasss »

Buenas, haber si alguien me puede decir si esto es un error o que esta pasando. Hago búsqueda ha ciegas en el v8x con el transpondedor o satélite astra 1H/1K/1L que es el que viene por defecto en el menu, la cuestion es que cuando hace la búsqueda no encuentra SR 22000, busca en los SR 21999 tanto en vertical como horizontal, siendo esto un problema porque hay canales que no los encuentra o si los encuentra no los abre, si haces búsqueda ciegas con la opción solo vertical que es para antenas comunitarias el problema es aun mas grave, busca en los 21999. Seria posible añadir en el listado de satelites el astra KR/1L/1M que encuentre los canales SR 22000.
dejo un link donde se pueden ver toda la lista que hace falta para este satelite

Code: Select all

https://satcesc.com/2020/06/26/movistar-en-astra-lista-actualizada-por-frecuencias/#.XxAAhSgzY9V
gracias pasen buen dia.

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

You get SR 21999 from a SR 22000 TP, this is normal.It happens very day.
Please just describe your problem.
Thank you.

Tasss
Posts: 151
Joined: Fri Apr 12, 2019 2:03 pm

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Tasss »

Gracias por su respuesta, revise el link que deje en el anterior post y verá todos los tp que son los correctos para poder visualizar dichos tp.
También decir o comentar que intentas buscar un tp sólo y cuando vas ha buscar el decodificador te dice que ese tp ya existe que es verdad pero no saca dicho canal o canales de ese grupo de búsqueda. Por lo tanto no sale y no se ve.
Esto ya lleva pasando algún tiempo no solo con este modelo sino con otros al hacer las búsquedas.
Pase buen día. Gracias.

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by alex.c »

Tasss wrote:
Fri Jul 17, 2020 9:27 am
Gracias por su respuesta, revise el link que deje en el anterior post y verá todos los tp que son los correctos para poder visualizar dichos tp.
También decir o comentar que intentas buscar un tp sólo y cuando vas ha buscar el decodificador te dice que ese tp ya existe que es verdad pero no saca dicho canal o canales de ese grupo de búsqueda. Por lo tanto no sale y no se ve.
Esto ya lleva pasando algún tiempo no solo con este modelo sino con otros al hacer las búsquedas.
Pase buen día. Gracias.
Sorry, not clear about your problem.
If you still have this issue, please try to make it clear.
Thanks.

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: GTMEDIA_V8 Series Bug Tracking System

Post by Bellman »

I know this was reported before but not sure if it was addressed In the latest firmware release for the v8 uhd but its still trying to auto biss povervu channels.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

Post Reply

Return to “GTMEDIA V8 SERIES”