GTMEDIA_V8 Series Bug Tracking System

[Feralkiwi]

Do you have the BISS key in the normal BISS list three times, one for each channel TP info?
If you are using the CMD BISS list, that the unit puts the auto roll code, that may be the issue.

I have not tested this with the V8X, but the UHD does not use working CMD BISS codes that it has, unless it has the internet connected to re roll the code, so any fixed BISS channel code I roll, I load into the normal BISS list.

Owen

[alex.c]

Do you have the BISS key in the normal BISS list three times, one for each channel TP info?
If you are using the CMD BISS list, that the unit puts the auto roll code, that may be the issue.

I have not tested this with the V8X, but the UHD does not use working CMD BISS codes that it has, unless it has the internet connected to re roll the code, so any fixed BISS channel code I roll, I load into the normal BISS list.

Owen

F A11FEED5 01 XXXXXXXXXXXXXXXX;
F A11FEED5 00 XXXXXXXXXXXXXXXX;

You can try this format, if you don't know the TP information.

[Delirium]

I have the distinct impression that every time you tune a channel encoded in Irdeto the receiver freezes and you have to switch it off and on again. Does anyone confirm?

Yes, it' s so.

[alex.c]

I have the distinct impression that every time you tune a channel encoded in Irdeto the receiver freezes and you have to switch it off and on again. Does anyone confirm?

Yes, it' s so.

That's right. Are you using cccam?
I have confirmed this bug, and fixed it.
Please wait the next firmware.

[Delirium]

@alex.c

Thanks.
These channels don't interest me, but it bothers me that the receiver freezes.

[alex.c]

@alex.c

Thanks.
These channels don't interest me, but it bothers me that the receiver freezes.

It only happend when you are using a cccam account, right?

[Delirium]

@alex.c

Thanks.
These channels don't interest me, but it bothers me that the receiver freezes.

It only happend when you are using a cccam account, right?

Right, I just checked.

[alex.c]

@alex.c

Thanks.
These channels don't interest me, but it bothers me that the receiver freezes.

It only happend when you are using a cccam account, right?

Right, I just checked.

OK, this bug was already fixed.
Just wait the next firmware.

[David61622]

El decodificador satelital gt media V8 uhd se queda congelada la imagen y el receptor no responde a nada, se queda parado, he actualizado a la última versión (207) pero se queda así, no hace nada, además hay problemas con las flores, algunas las coge bien y otras pone mensajes como name incorrecto o algo por el estilo, es agobiante

[David61622]

Hi skate666

I have the distinct impression that every time you tune a channel encoded in Irdeto the receiver freezes and you have to switch it off and on again. Does anyone confirm?

A mi también me sucede lo mismo

[theyguy]

I am having an issue with my V8UHD that I just got with the autoroll on 116.8, 4017 H 23200, it loads three of the channels, but does not load the 4th, it doesn't pick it up encryption type just ? in the info bar. Also have an issue on 3968 V 7500, shows as FTA, but when it does load it loads audio and displays "scrambled" message and does not roll.

[alex.c]

I am having an issue with my V8UHD that I just got with the autoroll on 116.8, 4017 H 23200, it loads three of the channels, but does not load the 4th, it doesn't pick it up encryption type just ? in the info bar. Also have an issue on 3968 V 7500, shows as FTA, but when it does load it loads audio and displays "scrambled" message and does not roll.

The channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.

[zawaung]

Hi admin I have v8 pro 2 receiver and I update the latest firmware (11-8-2020) but biss key can’t auto roll and it stop auto- biss calculating please wait. it never rolls biss key. Another error is adding cccam. When I on index one another index
auto on too. When I off an index another indexs off too. This bug is so disappointed for an user. Next update please fix this errors. Thanks admin team

[alex.c]

Hi admin I have v8 pro 2 receiver and I update the latest firmware (11-8-2020) but biss key can’t auto roll and it stop auto- biss calculating please wait. it never rolls biss key. Another error is adding cccam. When I on index one another index
auto on too. When I off an index another indexs off too. This bug is so disappointed for an user. Next update please fix this errors. Thanks admin team

You can send me your cccam accounts, then I can check what's wrong.
About the autobiss, please tell the channel informations, which sat, which TP, which channel?
Thank you.

[zawaung]

Biss keys roll correctly now but some channel on thaicom 6, tp 12604 v 3000 livesky 1,2,3,4 can’t roll correctly. Thanks for your kindness.

[theyguy]

The channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.

This is on a V8UHD - The 1 channel in 116.8 4017H23200 is BISS but shows "?" in the info bar. The rest of the channels (other than 2 feeds which do the same thing) show as BISS/FTA and roll perfectly.

The other 116.8 3968V7500 shows as FTA but is BISS (at least that is what lyngsat says) and does not roll. It also showed as FTA on my v7 Plus. I have a TS file for that one, how would you like it sent?

[alex.c]

The channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.

This is on a V8UHD - The 1 channel in 116.8 4017H23200 is BISS but shows "?" in the info bar. The rest of the channels (other than 2 feeds which do the same thing) show as BISS/FTA and roll perfectly.

The other 116.8 3968V7500 shows as FTA but is BISS (at least that is what lyngsat says) and does not roll. It also showed as FTA on my v7 Plus. I have a TS file for that one, how would you like it sent?

Hi, friend.
I sent you a PM. Please check it.

[alex.c]

The channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.

This is on a V8UHD - The 1 channel in 116.8 4017H23200 is BISS but shows "?" in the info bar. The rest of the channels (other than 2 feeds which do the same thing) show as BISS/FTA and roll perfectly.

The other 116.8 3968V7500 shows as FTA but is BISS (at least that is what lyngsat says) and does not roll. It also showed as FTA on my v7 Plus. I have a TS file for that one, how would you like it sent?

I received your channel.
Just like what I thought, these channels are scrambled, but it is not described in PMT.
So we don't know it is BISS channels.
That's why it doesn't work.

[theyguy]

OK, Thanks. Seemed strange that it comes up as FTA when it is scrambled.

[Lining]

1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.

2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?

Why are 5 numbers? The maximum value of PID does not exceed 8191

[alex.c]

OK, Thanks. Seemed strange that it comes up as FTA when it is scrambled.

Yes, non-standard format.

[Rendon1980]

Mismo problema. Aún no se corrige con la nueva actualización (v8x)

[skate666]

On V8 UHD full memory with only 4953 tv channels and 47 radio.
I tuned only 12 satellites
And all the others where do I put them ?

That is a low number!
I think I did the same with my V8 Golden some years back at 5000 top.

alex_c please note.

Owen

Get it.
We will try if we can get more room for more channel storage.

Yes please, try to find more storage, That's really big problem.
I can find same problem on the stored keys. No more than 999 for powervu keys

Thank you for your work

[przeeemek1]

1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.

2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?

Why are 5 numbers? The maximum value of PID does not exceed 8191

if I want to search for a single program, I have to provide the parameter marked in the picture. it's called SID, but I can see that this parameter needs to be passed in place of PCR PID. otherwise I can't search for anything. unless I am doing something wrong or there is some translation error.

[daabir]

Hola a todos.
He comprado una lista IPTV m3u para ponerla en el XTREAM de mi V8 HONOR pero no he conseguido que funcione. Carga la lista de canales pero no abre ninguno. Otras veces al cargar la lista aparece mensaje de error. La lista funciona porque la he probado en mi celular. Lo he intentado con otras listas de prueba de 24 horas y tampoco han funcionado.

Esta es la configuración de mi fichero "xtream.tex":

url = http://xxxxx.xxx (también lo he probado quitando "http://")
port = xxxxx (el que me indica el proveedor, normalmente 8880. Tambien he probado poniendo 0)
user = xxxxxxxxx
password = xxxxxxxxx

Agradecería un poco de ayuda. Gracias.
Saludos.

¿No hay ninguna respuesta, ningún moderador tiene al menos una sugerencia?