Hola buenas tardes soy nuevo en el foro y quería a ver si pueden ayudarme en este tema. Tengo mi freesat v8 super original funciona bien pero cada cierto tiempo se queda como sin no funcionara no funciona ni mando ni manualmente no enciende pero al dia siguiente me lo encuentro encendido y como no hubiera pasado nada ¿queria saber si ha alguno le ha pasado y que tendria que hacer para solucionar ese problema?
Gracias y un saludo
Freesat se apaga
Moderators: admin, GTMedia Team
Re: Freesat se apaga
Try another power supply.
Also you could upgrade the software.
If you do not want to change the software version you are using, then try a factory reset.
First save your user data in the USB backup menu and also "Export" your softcam.key file from the conditional access / 6666 / key edit menu.
If you have any ccam line save that information too.
Owen
Also you could upgrade the software.
If you do not want to change the software version you are using, then try a factory reset.
First save your user data in the USB backup menu and also "Export" your softcam.key file from the conditional access / 6666 / key edit menu.
If you have any ccam line save that information too.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 2
- Joined: Fri Jul 10, 2020 8:05 pm
Re: Freesat se apaga
No puedo actualizarlos porque no enciende
Re: Freesat se apaga
Puede ser la fuente de alimentación prueba con otra que sea de 12v mínimo de 1.5A de algún ruter o de otro aparato.
Un saludo.
Un saludo.
Re: Freesat se apaga
Try a flash.bin recovery.
Owen
flash.bin recovery is done like this.
Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote.
The unit should reload the software.
Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.
I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.
Try even older software as the file for flash.bin.
Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.
Good luck
New information: Users are reporting that naming the file "Flash.bin" with a capital has worked where "flash.bin" has not.
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.