GTMEDIA Forum

Intelsat 21 at 58.0°W satellite, you can receive contact me

https://www.lyngsat.com/Intelsat-21.html


1. Can you help me record the following TS stream? Upload cloud disk, send me download address, thank you very much

emms change on this frec? not works

What is the problem with this sat-TP, it is working perfect for me on my V8-Nova Orange, it was working on the V8-X yesterday, I will check it when I get home today.

P 0000 01 xxxxxxxxxxxxFA;302030000:V

I confirm;this tp is working fine without any trouble now

It works perfect on the V8-X as well, I just did a stream recording to see if there were any changes made to the TP.

Lining wrote: ↑

Sat Jul 11, 2020 2:34 am

Intelsat 21 at 58.0°W satellite, you can receive contact me

https://www.lyngsat.com/Intelsat-21.html


1. Can you help me record the following TS stream? Upload cloud disk, send me download address, thank you very much
360截图20200711103730558.jpg

No changes have been made to sat 58.0w-TP-4120-V-30000, fresh data stream recording still has Valid ECM & EMM keys in it, I can send them to you if you need them, all is good.

iq180 wrote: ↑

Fri Aug 14, 2020 5:46 pm

Lining wrote: ↑

Sat Jul 11, 2020 2:34 am

Intelsat 21 at 58.0°W satellite, you can receive contact me

https://www.lyngsat.com/Intelsat-21.html


1. Can you help me record the following TS stream? Upload cloud disk, send me download address, thank you very much
360截图20200711103730558.jpg

No changes have been made to sat 58.0w-TP-4120-V-30000, fresh data stream recording still has Valid ECM & EMM keys in it, I can send them to you if you need them, all is good.

No problems from here o this TPX. Wait about 3 mins before being clear. From Italy

yes that was the problem too long time to wait until clear.

And what about 3920H is working normally?

Also 4000H issue about weak signal form time ago, maybe on summer time.

antrabe wrote: ↑

Sat Aug 15, 2020 10:03 am

yes that was the problem too long time to wait until clear.

And what about 3920H is working normally?

Also 4000H issue about weak signal form time ago, maybe on summer time.

3920 H now for me works fine, waiting about 5 mins. Befor last firmware there was no chance to open it
4000H works fine too, even before.

The problem was on Turner Packages in 58W and 43W.
Now it's fine

ok are working now fine.

What i want to say is 3760 V this tp is which something should change.

Hello someone found issues on tp 4000H 58W no works emms