T2-MI Eutelsat 8w (V8UHD)

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

Hi.

Any way to tune this transponder (4148 L 60000)? Some receivers, after change drivers, tune this transponder.

Here, some full .ts to analyze:

Code: Select all

hxxxs://mega.nz/file/2IM32J6J#KCm_QcOlzruGTZJ7w66MiDVB2E7VgpmD4DtLowNcyeI
and 900 MB (same TP)

Code: Select all

hxxp://www.mediafire.com/file/py6z2a3tsab02yn/8.0W_4153%252C415_L_60000_%25282020-10-07_13.45.34%2529_dump.ts/file
V8UHD no signal

After tests, I see symbol rates: 1000 until 47000 only.
Last edited by frankviana on Wed Oct 07, 2020 7:24 pm, edited 2 times in total.
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

JSat
Posts: 129
Joined: Sat Feb 24, 2018 3:46 pm
Location: Brazil, RN, Jardim do Seridó

Re: T2-MI Eutelsat 8w (V8UHD)

Post by JSat »

Here I would also like to resolve this issue. I am interested in tuning these channels in the V8 UHD and I can't. On another device of mine the Freesky Triple X I can. So the right solution to update the VHD UHD with this file?

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

This transponder show 4 MIS and 8 PLP

MIS 1 PLP 1
MIS 2 PLP 2
MIS 3 PLP 3, PLP 4, PLP 5, PLP 6, PLP 7
MIS 4 PLP 8

Code: Select all

hxxp://www.portaleds.com/satelites/tps.php?sat=3520&fre=4153L
Last edited by frankviana on Wed Oct 07, 2020 6:39 pm, edited 1 time in total.
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

JSat wrote:
Wed Oct 07, 2020 3:57 pm
Here I would also like to resolve this issue. I am interested in tuning these channels in the V8 UHD and I can't. On another device of mine the Freesky Triple X I can. So the right solution to update the VHD UHD with this file?
I don't know, but the coders/engineers need change " software code line" max range for tune/lock signal SR 47000 to 60000

If no change range lock, only tune/lock until 47000 symbol rates. If you put the SR 60000, accept, but no lock.
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

How to know end symbol rate? Until 47500?

SR 60000 no signal. Maybe fix drivers? Here I have Android receiver and Lock this transponder.

IMG_20210225_083718.jpg
IMG_20210225_083718.jpg (2.56 MiB) Viewed 1201 times
IMG_20210225_084649.jpg
IMG_20210225_084649.jpg (2.56 MiB) Viewed 1198 times

My Android receiver (blindscan)

IMG_20210225_084949.jpg
IMG_20210225_084949.jpg (3.3 MiB) Viewed 1197 times
IMG_20210225_084933.jpg
IMG_20210225_084933.jpg (3.24 MiB) Viewed 1197 times
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

Any way to know the range for tuner (hardware)?

Thx
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

New firmware (april) no signal too for symbol rate 60000

Thx.
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: T2-MI Eutelsat 8w (V8UHD)

Post by Tom.w »

frankviana wrote:
Fri Apr 09, 2021 2:41 pm
New firmware (april) no signal too for symbol rate 60000

Thx.
hello
how about the signal strength and quality on other platform?
it depends on the signal strength and quality.

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

frankviana wrote:
Thu Feb 25, 2021 11:42 am
How to know end symbol rate? Until 47500?

SR 60000 no signal. Maybe fix drivers? Here I have Android receiver and Lock this transponder.


IMG_20210225_083718.jpg


IMG_20210225_084649.jpg


My Android receiver (blindscan)


IMG_20210225_084949.jpg


IMG_20210225_084933.jpg
See the good signal (Android device)
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

frankviana
Posts: 57
Joined: Thu Apr 05, 2018 12:44 pm
Location: Brasil

Re: T2-MI Eutelsat 8w (V8UHD)

Post by frankviana »

Tom.w wrote:
Mon Apr 12, 2021 10:52 am
frankviana wrote:
Fri Apr 09, 2021 2:41 pm
New firmware (april) no signal too for symbol rate 60000

Thx.
hello
how about the signal strength and quality on other platform?
it depends on the signal strength and quality.
No... Here I have good signal (xxxxxdevice)

My xxxxxxxx show all channels multistream for this transponder.
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).

Post Reply

Return to “GTMEDIA V8 SERIES”