Page 1 of 1
T2-MI Eutelsat 8w (V8UHD)
Posted: Wed Oct 07, 2020 12:42 pm
by frankviana
Hi.
Any way to tune this transponder (4148 L 60000)? Some receivers, after change drivers, tune this transponder.
Here, some full .ts to analyze:
Code: Select all
hxxxs://mega.nz/file/2IM32J6J#KCm_QcOlzruGTZJ7w66MiDVB2E7VgpmD4DtLowNcyeI
and 900 MB (same TP)
Code: Select all
hxxp://www.mediafire.com/file/py6z2a3tsab02yn/8.0W_4153%252C415_L_60000_%25282020-10-07_13.45.34%2529_dump.ts/file
V8UHD no signal
After tests, I see symbol rates: 1000 until 47000 only.
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Wed Oct 07, 2020 3:57 pm
by JSat
Here I would also like to resolve this issue. I am interested in tuning these channels in the V8 UHD and I can't. On another device of mine the Freesky Triple X I can. So the right solution to update the VHD UHD with this file?
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Wed Oct 07, 2020 4:27 pm
by frankviana
This transponder show 4 MIS and 8 PLP
MIS 1 PLP 1
MIS 2 PLP 2
MIS 3 PLP 3, PLP 4, PLP 5, PLP 6, PLP 7
MIS 4 PLP 8
Code: Select all
hxxp://www.portaleds.com/satelites/tps.php?sat=3520&fre=4153L
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Wed Oct 07, 2020 4:29 pm
by frankviana
JSat wrote: ↑Wed Oct 07, 2020 3:57 pm
Here I would also like to resolve this issue. I am interested in tuning these channels in the V8 UHD and I can't. On another device of mine the Freesky Triple X I can. So the right solution to update the VHD UHD with this file?
I don't know, but the coders/engineers need change " software code line" max range for tune/lock signal SR 47000 to 60000
If no change range lock, only tune/lock until 47000 symbol rates. If you put the SR 60000, accept, but no lock.
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Thu Feb 25, 2021 11:42 am
by frankviana
How to know end symbol rate? Until 47500?
SR 60000 no signal. Maybe fix drivers? Here I have Android receiver and Lock this transponder.
- IMG_20210225_083718.jpg (2.56 MiB) Viewed 1258 times
- IMG_20210225_084649.jpg (2.56 MiB) Viewed 1255 times
My Android receiver (blindscan)
- IMG_20210225_084949.jpg (3.3 MiB) Viewed 1254 times
- IMG_20210225_084933.jpg (3.24 MiB) Viewed 1254 times
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Sun Apr 04, 2021 2:38 am
by frankviana
Any way to know the range for tuner (hardware)?
Thx
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Fri Apr 09, 2021 2:41 pm
by frankviana
New firmware (april) no signal too for symbol rate 60000
Thx.
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Mon Apr 12, 2021 10:52 am
by Tom.w
frankviana wrote: ↑Fri Apr 09, 2021 2:41 pm
New firmware (april) no signal too for symbol rate 60000
Thx.
hello
how about the signal strength and quality on other platform?
it depends on the signal strength and quality.
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Thu Apr 15, 2021 7:21 pm
by frankviana
frankviana wrote: ↑Thu Feb 25, 2021 11:42 am
How to know end symbol rate? Until 47500?
SR 60000 no signal. Maybe fix drivers? Here I have Android receiver and Lock this transponder.
IMG_20210225_083718.jpg
IMG_20210225_084649.jpg
My Android receiver (blindscan)
IMG_20210225_084949.jpg
IMG_20210225_084933.jpg
See the good signal (Android device)
Re: T2-MI Eutelsat 8w (V8UHD)
Posted: Thu Apr 15, 2021 7:22 pm
by frankviana
Tom.w wrote: ↑Mon Apr 12, 2021 10:52 am
frankviana wrote: ↑Fri Apr 09, 2021 2:41 pm
New firmware (april) no signal too for symbol rate 60000
Thx.
hello
how about the signal strength and quality on other platform?
it depends on the signal strength and quality.
No... Here I have good signal (xxxxxdevice)
My xxxxxxxx show all channels multistream for this transponder.