Biss auto roll

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Farhan3333
Posts: 1
Joined: Sat May 09, 2020 4:44 pm

Biss auto roll

Post by Farhan3333 »

I have gtmedia v8x.
There is a problem that biss key auto roll feature not updating biss key automatically.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss auto roll

Post by STRETCH »

Is it just on one transponder / satellite, or on all.

Den

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

I installed GTMEDIA V8UHD Firmware (30/10/2020) but I couldn't open biss channels on any satellite, why? Thank you.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss auto roll

Post by STRETCH »

Why hi-jack some ones thread, what biss channels are you after.

Den

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

Thank you. I got it done
Last edited by burakvi on Sun Nov 08, 2020 5:05 pm, edited 1 time in total.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss auto roll

Post by STRETCH »

What transponder ?, is it one of these 11189v 2666 / 11192v 3674 / 11046h 8333 / 12550v 2222.

Den

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

It was between 11500-11650 V, it did not work, and I have this question for you, even if it finds a biss key, why does it not appear in the biss key section of the softcam key in the network section. Thank you.

Can't we see the cw key it gives?

16 ° E 12643 V 27500 HD DVB-S2 - 4: 2: 0 - 8PSKID: SRTV Feed HD decoded this channel very fast but where is the cw

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss auto roll

Post by Feralkiwi »

burakvi wrote:
Fri Nov 06, 2020 8:25 pm
It was between 11500-11650 V, it did not work, and I have this question for you, even if it finds a biss key, why does it not appear in the biss key section of the softcam key in the network section. Thank you.

Can't we see the cw key it gives?

16 ° E 12643 V 27500 HD DVB-S2 - 4: 2: 0 - 8PSKID: SRTV Feed HD decoded this channel very fast but where is the cw
Rolled keys are in the CMBISS section.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

Feralkiwi wrote:
Fri Nov 06, 2020 8:30 pm
burakvi wrote:
Fri Nov 06, 2020 8:25 pm
It was between 11500-11650 V, it did not work, and I have this question for you, even if it finds a biss key, why does it not appear in the biss key section of the softcam key in the network section. Thank you.

Can't we see the cw key it gives?

16 ° E 12643 V 27500 HD DVB-S2 - 4: 2: 0 - 8PSKID: SRTV Feed HD decoded this channel very fast but where is the cw
Rolled keys are in the CMBISS section.

Owen
Where is the CMBISS section GTMedia V8 UHD I couldn't see it.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss auto roll

Post by Feralkiwi »

Menu / network / right arrow / 6666 / cw / then you will see the cmbiss menu.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss auto roll

Post by STRETCH »

On the softcam file, you may find the key, against (F).
(P) Powervu
(T) Tandberg
(B) Biss
(I) Irdeto for channels @ 39e

Den

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

Feralkiwi wrote:
Fri Nov 06, 2020 8:35 pm
Menu / network / right arrow / 6666 / cw / then you will see the cmbiss menu.

Owen
unfortunately it doesn't appear there, it's empty

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss auto roll

Post by Feralkiwi »

After an upgrade of the software the key file is cleared.
You need to re load (Import) you softcam.key file from USB if you saved it before you upgraded.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

Feralkiwi wrote:
Fri Nov 06, 2020 8:38 pm
After an upgrade of the software the key file is cleared.
You need to re load (Import) you softcam.key file from USB if you saved it before you upgraded.

Owen
Thank you. I got it done
Last edited by burakvi on Sun Nov 08, 2020 5:07 pm, edited 1 time in total.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss auto roll

Post by STRETCH »

@ burakvi
PM sent

Den

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

STRETCH wrote:
Fri Nov 06, 2020 8:51 pm
@ burakvi
PM sent

Den
Thank you. I got it done
Last edited by burakvi on Sun Nov 08, 2020 5:07 pm, edited 1 time in total.

leehrat
Posts: 195
Joined: Fri Jun 30, 2017 8:07 pm

Re: Biss auto roll

Post by leehrat »

If you save you softcam and then open it on your computer you will save the saved key from the last channel you opened. if you wish you can then add it manual to your box.

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

leehrat wrote:
Sat Nov 07, 2020 1:24 pm
If you save you softcam and then open it on your computer you will save the saved key from the last channel you opened. if you wish you can then add it manual to your box.
Thank you. I got it done
Last edited by burakvi on Sun Nov 08, 2020 3:37 pm, edited 1 time in total.

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

Feralkiwi wrote:
Fri Nov 06, 2020 8:35 pm
Menu / network / right arrow / 6666 / cw / then you will see the cmbiss menu.

Owen
Thank you. I got it done

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

burakvi wrote:
Sat Nov 07, 2020 9:53 am
STRETCH wrote:
Fri Nov 06, 2020 8:51 pm
@ burakvi
PM sent

Den
Thank you. I got it done
How about your biss auto roll works for Get Media V8 UHD? I hope the next software will be fixed. I wish you luck. Good luck with.

Image

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

As of today, the biss auto roll system does not work on GTMedia V8 UHD and V8Nova Orange boxes. Thank you.

STRETCH
Posts: 3641
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: Biss auto roll

Post by STRETCH »

Can confirm that the auto biss roll did not happen with a v8 nova orange, have not tried it with the V8UHD, that receiver is not on that satellite, but it has worked with the V8X, (16E 12643V 27500 SRTV FEED HD)

Den

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

STRETCH wrote:
Tue Nov 24, 2020 3:15 pm
Can confirm that the auto biss roll did not happen with a v8 nova orange, have not tried it with the V8UHD, that receiver is not on that satellite, but it has worked with the V8X, (16E 12643V 27500 SRTV FEED HD)

Den
What is the reason for Biss autol roll waiting like in the picture? Are you working on this problem. Thank you. ( v8 nova orange and V8UHD )

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: Biss auto roll

Post by alex.c »

burakvi wrote:
Wed Nov 25, 2020 11:54 am
STRETCH wrote:
Tue Nov 24, 2020 3:15 pm
Can confirm that the auto biss roll did not happen with a v8 nova orange, have not tried it with the V8UHD, that receiver is not on that satellite, but it has worked with the V8X, (16E 12643V 27500 SRTV FEED HD)

Den
What is the reason for Biss autol roll waiting like in the picture? Are you working on this problem. Thank you. ( v8 nova orange and V8UHD )
Yes, I'm working on this.
But not all wildfeeds can't auto roll.
You need to tell me which TP and which channels you are waiting.
Thanks.

burakvi
Posts: 30
Joined: Tue Jun 16, 2020 3:31 pm

Re: Biss auto roll

Post by burakvi »

alex.c wrote:
Thu Nov 26, 2020 2:22 am
burakvi wrote:
Wed Nov 25, 2020 11:54 am
STRETCH wrote:
Tue Nov 24, 2020 3:15 pm
Can confirm that the auto biss roll did not happen with a v8 nova orange, have not tried it with the V8UHD, that receiver is not on that satellite, but it has worked with the V8X, (16E 12643V 27500 SRTV FEED HD)

Den
What is the reason for Biss autol roll waiting like in the picture? Are you working on this problem. Thank you. ( v8 nova orange and V8UHD )
Yes, I'm working on this.
But not all wildfeeds can't auto roll.
You need to tell me which TP and which channels you are waiting.
Thanks.
I gave you the necessary information with a private message. Good luck with.

Post Reply

Return to “GTMEDIA V8 SERIES”