Page 1 of 1

Canali Mediaset

Posted: Fri Nov 20, 2020 5:47 pm
by totonno
Buonasera, se qualcuno può aiutarmi, ho un'altro problema col V8 UHD, oltre quello che non mi apre i canali iptv, da qualche giorno non mi apre i canali Mediaset che prima vedevo. Ho rifatto la ricerca sul Sat ma continuo a non vederlicon card inserita! Grazie per la risposta.

Re: Canali Mediaset

Posted: Sat Nov 21, 2020 5:02 pm
by gurunaki
Ciao
Io ho un v8x, diverso dal tuo decoder ma
Posso chiederti se anche tu hai avuto problemi con la prima accensione?
Il telecomando non dialoga con il decoder e non so che tasti premere per iniziare il setup ..
Non vorrei ci fosse un difetto.
Grazie in anticipo
Antonio

Re: Canali Mediaset

Posted: Sat Nov 21, 2020 6:29 pm
by STRETCH
@ totonno
Ref to (Mediasat) on 5w, as yet the V8UHD is unable to receive these channels, it is work in progress.

Den

Re: Canali Mediaset

Posted: Mon Nov 23, 2020 6:53 am
by Tom.w
totonno wrote:
Fri Nov 20, 2020 5:47 pm
Buonasera, se qualcuno può aiutarmi, ho un'altro problema col V8 UHD, oltre quello che non mi apre i canali iptv, da qualche giorno non mi apre i canali Mediaset che prima vedevo. Ho rifatto la ricerca sul Sat ma continuo a non vederlicon card inserita! Grazie per la risposta.
hello
did you use the tivusat smard card?
It is only Mediaset channels can not be opened or all the channels can not be opened?
Can you please tell me which satellite,which frequency, i want to ask other users test it

Re: Canali Mediaset

Posted: Mon Nov 23, 2020 7:03 am
by Tom.w
gurunaki wrote:
Sat Nov 21, 2020 5:02 pm
Ciao
Io ho un v8x, diverso dal tuo decoder ma
Posso chiederti se anche tu hai avuto problemi con la prima accensione?
Il telecomando non dialoga con il decoder e non so che tasti premere per iniziare il setup ..
Non vorrei ci fosse un difetto.
Grazie in anticipo
Antonio
hello
Now the remote control is work or not?
second,you mean you don't know how to installation some satellite,then scan to get channels?

Re: Canali Mediaset

Posted: Mon Nov 23, 2020 7:36 am
by Feralkiwi
Tom.w wrote:
Mon Nov 23, 2020 7:03 am
gurunaki wrote:
Sat Nov 21, 2020 5:02 pm
Ciao
Io ho un v8x, diverso dal tuo decoder ma
Posso chiederti se anche tu hai avuto problemi con la prima accensione?
Il telecomando non dialoga con il decoder e non so che tasti premere per iniziare il setup ..
Non vorrei ci fosse un difetto.
Grazie in anticipo
Antonio
hello
Now the remote control is work or not?
second,you mean you don't know how to installation some satellite,then scan to get channels?
Tom.w
There is discussion with this user about the remote here too.

Owen

Re: Canali Mediaset

Posted: Mon Nov 23, 2020 7:41 am
by Tom.w
Feralkiwi wrote:
Mon Nov 23, 2020 7:36 am
Tom.w wrote:
Mon Nov 23, 2020 7:03 am
gurunaki wrote:
Sat Nov 21, 2020 5:02 pm
Ciao
Io ho un v8x, diverso dal tuo decoder ma
Posso chiederti se anche tu hai avuto problemi con la prima accensione?
Il telecomando non dialoga con il decoder e non so che tasti premere per iniziare il setup ..
Non vorrei ci fosse un difetto.
Grazie in anticipo
Antonio
hello
Now the remote control is work or not?
second,you mean you don't know how to installation some satellite,then scan to get channels?
Tom.w
There is discussion with this user about the remote here too.

Owen
thank you very much.
Maybe there is some wrong with th IR.

Re: Canali Mediaset

Posted: Tue Nov 24, 2020 11:41 am
by totonno
Ciao, io non ho avuto problemi all'avvio del decoder! Per il resto, secondo me, basta digitare il tasto menu sul telecomando e quindi seguire le domande che vengono poste dal decoder in base a quello che devi fare. Un saluto.

Re: Canali Mediaset

Posted: Tue Nov 24, 2020 11:49 am
by gurunaki
totonno wrote:
Tue Nov 24, 2020 11:41 am
Ciao, io non ho avuto problemi all'avvio del decoder! Per il resto, secondo me, basta digitare il tasto menu sul telecomando e quindi seguire le domande che vengono poste dal decoder in base a quello che devi fare. Un saluto.
ciao e grazie per la risposta.
il problema che ho - spero sia il telecomando - me e stanno inviando un altro..
quando hai fatto la scan dei canali hotbird il v8x ha trovato subito i canali? a me non ne ha trovato nessuno... passavano i minuti senza risultati
hai cambiato qualche cosa nel menù o hai solo fatto scan?
io ho antenna condominiale e, leggevo che bisogna cambiare un settaggio per trovare i canali.
grazie ancora

Re: Canali Mediaset

Posted: Tue Nov 24, 2020 4:18 pm
by totonno
Ciao, devi prima scegliere il Satellite, poi scegli la modalità di scansione "cieca" e quindi "ricerca" , ciao.

Re: Canali Mediaset

Posted: Tue Nov 24, 2020 8:33 pm
by Feralkiwi
gurunaki wrote:
Tue Nov 24, 2020 11:49 am
totonno wrote:
Tue Nov 24, 2020 11:41 am
Ciao, io non ho avuto problemi all'avvio del decoder! Per il resto, secondo me, basta digitare il tasto menu sul telecomando e quindi seguire le domande che vengono poste dal decoder in base a quello che devi fare. Un saluto.
ciao e grazie per la risposta.
il problema che ho - spero sia il telecomando - me e stanno inviando un altro..
quando hai fatto la scan dei canali hotbird il v8x ha trovato subito i canali? a me non ne ha trovato nessuno... passavano i minuti senza risultati
hai cambiato qualche cosa nel menù o hai solo fatto scan?
io ho antenna condominiale e, leggevo che bisogna cambiare un settaggio per trovare i canali.
grazie ancora
Check with your building people what sort of connection the building has.
It may be that your building is newer and has a unicable connection and for that you need to know what frequency your unit is allocated.

Owen

Re: Canali Mediaset

Posted: Sun Jan 21, 2024 2:09 pm
by vaccant
Buonasera, se qualcuno può aiutarmi, ho un'altro problema col V8 UHD, oltre al fatto che non vedo i canali mediaset con la carta TVsat oro, non mi accetta piu' la password per entrare a organizzare i canali ecc.
Grazie in anticipo

Re: Canali Mediaset

Posted: Sun Jan 21, 2024 2:49 pm
by STRETCH
The main code is 0000, have read that with Mars the changes to 9876.

Den

Re: Canali Mediaset

Posted: Sun Jan 21, 2024 5:47 pm
by vaccant
Grazie ci provo