Channel 9 multistream on Intelsat 19
Moderators: admin, GTMedia Team
Channel 9 multistream on Intelsat 19
Has anybody had any success at receiving the channel 9 multistream channels on Intelsat 19?
If anybody has - how did they do it?
If anybody has - how did they do it?
Re: Channel 9 multistream on Intelsat 19
Yes.
The GT Media units from the V8Pro2 on all do the multistream version one the that TP is.
Here in NZ I just see it and it drifts in and out of a high enough signal level to use.
In Auzz you should have no issue, you just need a good dish as the data must be clean to separate first the stream and then the video channel.
When working I get EPG and all.
Owen
The GT Media units from the V8Pro2 on all do the multistream version one the that TP is.
Here in NZ I just see it and it drifts in and out of a high enough signal level to use.
In Auzz you should have no issue, you just need a good dish as the data must be clean to separate first the stream and then the video channel.
When working I get EPG and all.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Channel 9 multistream on Intelsat 19
I am using a V8 UHD, I am assuming that is compatible? plenty of signal just the channels wont scan.
Re: Channel 9 multistream on Intelsat 19
hello.
channel 9 is on the tp 12569 or not?
do you use the newest firmware of V8uhd?
how many channels do you get with V8uhd?
how about the signal intensity and quality?
Re: Channel 9 multistream on Intelsat 19
Hi, yes the transponder at 12569.
I am using the latest firmware as was uploaded yesterday.
With the encrypted channels included I can scan up 127 channels or if I just scan the FTA channels 14.
Signal intensity and quality is between 85% and 89% on the channels that do scan up.
I am using the latest firmware as was uploaded yesterday.
With the encrypted channels included I can scan up 127 channels or if I just scan the FTA channels 14.
Signal intensity and quality is between 85% and 89% on the channels that do scan up.
Re: Channel 9 multistream on Intelsat 19
Mine scans in OK with just the normal settings.
As soon as there is lock it will scan and if the signal fades a little it scans the channel SID's instead of the channel names.
It is odd that you can not scan those channels?
I use the normal scan settings and it finds the four "streams" OK.
Is your signal lock steady?
Also as there is another TP on the H side of that sat, check your skew is correct.
Note that some of the skew's for Isat19ku are out by 15 degrees from normal, so if you are using a motor dish the LNB will be out and the H TP will come through.
Owen
As soon as there is lock it will scan and if the signal fades a little it scans the channel SID's instead of the channel names.
It is odd that you can not scan those channels?
I use the normal scan settings and it finds the four "streams" OK.
Is your signal lock steady?
Also as there is another TP on the H side of that sat, check your skew is correct.
Note that some of the skew's for Isat19ku are out by 15 degrees from normal, so if you are using a motor dish the LNB will be out and the H TP will come through.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Channel 9 multistream on Intelsat 19
I do not get a lock on 12569 with the gtmedia v8 uhd.
There is a ton of signal and signal quality there though, my ultraplus locks and scans the channel 9 mux with no dramas at all, I have am using a fixed dish and have tweaked it so I am now getting between 89%-94% signal intensity and quality on all of the transponders that will scan.
I have a null figure for my cross pole so I think it is unlikely that the skew is incorrect.
I am very confident that it is not a signal problem (I have been playing with satellite tv for over 20 years now)
All the other transponders scan up with the gtmedia, it is only 12569 that will not scan or lock.
There is a ton of signal and signal quality there though, my ultraplus locks and scans the channel 9 mux with no dramas at all, I have am using a fixed dish and have tweaked it so I am now getting between 89%-94% signal intensity and quality on all of the transponders that will scan.
I have a null figure for my cross pole so I think it is unlikely that the skew is incorrect.
I am very confident that it is not a signal problem (I have been playing with satellite tv for over 20 years now)
All the other transponders scan up with the gtmedia, it is only 12569 that will not scan or lock.
Re: Channel 9 multistream on Intelsat 19
With the UHD check the settings for PLSN or something like that.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Channel 9 multistream on Intelsat 19
Hellomyx123 wrote: ↑Tue Jan 19, 2021 12:35 pmI do not get a lock on 12569 with the gtmedia v8 uhd.
There is a ton of signal and signal quality there though, my ultraplus locks and scans the channel 9 mux with no dramas at all, I have am using a fixed dish and have tweaked it so I am now getting between 89%-94% signal intensity and quality on all of the transponders that will scan.
I have a null figure for my cross pole so I think it is unlikely that the skew is incorrect.
I am very confident that it is not a signal problem (I have been playing with satellite tv for over 20 years now)
All the other transponders scan up with the gtmedia, it is only 12569 that will not scan or lock.
We are discussing this issue.
After that, we need your cooperation to do some tests.
Re: Channel 9 multistream on Intelsat 19
Sounds good to me, anything I can do to help
-
- Posts: 57
- Joined: Thu Apr 05, 2018 12:44 pm
- Location: Brasil
Re: Channel 9 multistream on Intelsat 19
Intelsat 21 - 58ºw (T2-MI) no tune here too this channel (V8UHD). Transponder scanned, but no channels found.
V8UHD, GTC, SX88+, Zero 4K, Mecool K1/K2/K3, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, AZBOX Premium+, Rasp Pi 2/3, Orange Pi PC, Satlink 6960, Satlink 6932, V8, V8 Meter, S270 ISDB-T. Motorized dish - 5m (20ºE - 116.8ºW).
Re: Channel 9 multistream on Intelsat 19
Yes V8UHD really need to be work on for it to be able to scan any multilstream channels Rai parkage at 5°west , Abertis at 30° west
Re: Channel 9 multistream on Intelsat 19
@ jossy4k
With ref to streaming channels at 5w, they can be scanned with this receiver, 30w channels, this is work in progess, also 27.5w channels.
Den
With ref to streaming channels at 5w, they can be scanned with this receiver, 30w channels, this is work in progess, also 27.5w channels.
Den
Re: Channel 9 multistream on Intelsat 19
I have had a bit more of a play today, this box will not scan the SBS multistream services from Optus D1 either, the ABC channels scan straight up, SBS doesnt. So from 9, ABC and SBS only ABC works
Re: Channel 9 multistream on Intelsat 19
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.