Qualcuno italiano mi può aiutare a capire cosa devo fare per settare questo decoder?
Grazie
Aiuto con v8 2pro
Moderators: admin, GTMedia Team
Re: Aiuto con v8 2pro
If you know what satellite your dish is pointed at, choose that satellite on the satellite list and enter the settings to match the LNB frequency of your dish. Antenna settings.
Most will be 9750/10600 for small dishes and 5150 for 2.4m big dishes.
After that press OK (the middle button) so there is a tick by that satellite in the list.
You can not do a scan of that satellite, use "Blind" scan.
For the terrestrial set the country to Italy and do an auto scan.
Good luck.
Owen
Most will be 9750/10600 for small dishes and 5150 for 2.4m big dishes.
After that press OK (the middle button) so there is a tick by that satellite in the list.
You can not do a scan of that satellite, use "Blind" scan.
For the terrestrial set the country to Italy and do an auto scan.
Good luck.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Aiuto con v8 2pro
Ciao, questo è stato fatto, ricevo pochi canali in italiano. Come faccio a modificare firmware, ccam ecc. A cosa serve?
Re: Aiuto con v8 2pro
Solo alcuni canali RAI.
No mediaset.
No mediaset.
Re: Aiuto con v8 2pro
[italiano] cosa vuol dire 'pochi' canali? Quanti? Sei sicuro di essere su Hotbird @ 13° E?
[english] what's the meaning of 'few' channels? How many? are you sure to point to Hotbird @ 13° E?
[english] what's the meaning of 'few' channels? How many? are you sure to point to Hotbird @ 13° E?
GTCombo - V8 UHD - V8 Finder - V8 Finder2 - 90 cm motorized dish