v8 UHD Firmware v220

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

v8 UHD Firmware v220

Post by spc412 »

Just upgraded to v220 now after uploading user database and setting up box i get no chanells after doing any scan. Blind scan seems to stall takes forever to scan, tried accurate, and preset nothing. Forced v219 update box works fine. This firmware v220 needs consideable work to be useful!!!

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: v8 UHD Firmware v220

Post by cpr43 »

spc412 wrote:
Mon Jan 18, 2021 7:47 pm
Just upgraded to v220 now after uploading user database and setting up box i get no chanells after doing any scan. Blind scan seems to stall takes forever to scan, tried accurate, and preset nothing. Forced v219 update box works fine. This firmware v220 needs consideable work to be useful!!!
Try doing backup

Factory reset

Re-install latest

Factory reset

Re-install backup

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

I'll give it a try see what happens

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

Didn't work so i flashed back to v219. Scan's are working so v220 has issues

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

Maybe it's the user db thats not compatible with v220?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 UHD Firmware v220

Post by Feralkiwi »

Check that your antenna setting are correct for your dishes.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 UHD Firmware v220

Post by Feralkiwi »

Also check that you have not got LNB power set to OFF.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

I'm using an universal lnb set at 9750-16000 in my settings, polarity=auto, Diseqc=disabled. I checked my cable connections everything id fine. Lnb power is on

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

Signal varies around 52-65%, Quality is 0%. I know i need to tweak the dish

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 UHD Firmware v220

Post by Feralkiwi »

Have you re down loaded a new copy of V220?

Have you tried setting up a fresh sat list after you update rather than reload your current list?

Is the listing in the antenna setting that we cannot change still saying LNB-1?

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

I haven't setup new sat list yet. I using 60w-133w sats, I'm in the eastern USA. The Antenna Connection=Tuner1, I have it set to fixed.

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

In the single sat search area LNB1 is greyed out but it is there in that section

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: v8 UHD Firmware v220

Post by Tom.w »

spc412 wrote:
Mon Jan 18, 2021 8:54 pm
In the single sat search area LNB1 is greyed out but it is there in that section
please try to upgrade the v220,then do not update your user db,directly do blind scan,how about the result?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 UHD Firmware v220

Post by Feralkiwi »

Try a factory reset and then making a new sat list in the unit and see what you get.

You can always reload your own list later.

Owen

Tom.w
This user reported
Just upgraded to v220 now after uploading user database and setting up box i get no chanells after doing any scan. Blind scan seems to stall takes forever to scan, tried accurate, and preset nothing. Forced v219 update box works fine. This firmware v220 needs consideable work to be useful!!!
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

Back to v219 again, after all the suggestions v220 still will not Blind/Accurate scan seems to be stuck taking very, very long time with no results. The last scan i tried waited 3 hours nothing, i didn't even get the usual No Program Found message. I checked my connections, the Dish everything v220 not working. V219 does work

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: v8 UHD Firmware v220

Post by Tom.w »

spc412 wrote:
Wed Jan 20, 2021 3:07 am
Back to v219 again, after all the suggestions v220 still will not Blind/Accurate scan seems to be stuck taking very, very long time with no results. The last scan i tried waited 3 hours nothing, i didn't even get the usual No Program Found message. I checked my connections, the Dish everything v220 not working. V219 does work
hello

can you backup your v220 firmware to me.i will check it

spc412
Posts: 85
Joined: Sun Jul 05, 2020 2:23 pm

Re: v8 UHD Firmware v220

Post by spc412 »

Here is a backup of my firmware v220
Tom.W

Forum users please do not download the firmware i posted it is for Tom.W to look at thank you
Attachments
V8UHD_flash.rar
(4.99 MiB) Downloaded 32 times

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: v8 UHD Firmware v220

Post by Tom.w »

spc412 wrote:
Fri Jan 22, 2021 6:03 pm
Here is a backup of my firmware v220
Tom.W

Forum users please do not download the firmware i posted it is for Tom.W to look at thank you
thank you very much
i will check it

xtraveo
Posts: 123
Joined: Thu Aug 11, 2016 8:19 pm

Re: v8 UHD Firmware v220

Post by xtraveo »

V220 did not connect my cline ,cline is working in another deco brand. :( :(

User avatar
Tom.w
网站管理员
Posts: 1786
Joined: Mon Jul 27, 2020 3:58 am

Re: v8 UHD Firmware v220

Post by Tom.w »

xtraveo wrote:
Mon Jan 25, 2021 3:20 pm
V220 did not connect my cline ,cline is working in another deco brand. :( :(
what is the information when connect your cline on the protocol menu?
please show me the photo

coolpazo
Posts: 10
Joined: Tue Jan 26, 2021 6:57 pm
Location: България

Re: v8 UHD Firmware v220

Post by coolpazo »

hi, will you be able to add support for Griffin cards and also do you support CI + cards

User avatar
alex.c
网站管理员
Posts: 1420
Joined: Fri Jun 05, 2020 8:01 am

Re: v8 UHD Firmware v220

Post by alex.c »

coolpazo wrote:
Tue Jan 26, 2021 10:24 pm
hi, will you be able to add support for Griffin cards and also do you support CI + cards
Do you have a Griffin card in your hand?
If I send you the testing firmware, can you please test it?

coolpazo
Posts: 10
Joined: Tue Jan 26, 2021 6:57 pm
Location: България

Re: v8 UHD Firmware v220

Post by coolpazo »

alex.c wrote:
Wed Jan 27, 2021 2:05 am
coolpazo wrote:
Tue Jan 26, 2021 10:24 pm
hi, will you be able to add support for Griffin cards and also do you support CI + cards
Do you have a Griffin card in your hand?
If I send you the testing firmware, can you please test it?
yes i have card. i will test and answer you .. thank you.

Post Reply

Return to “GTMEDIA V8 SERIES”