V8UHD and low symbol rates

[frankviana]

Hi. How about try to fix low (and high) symbol rates?

Here we have some rádios and no way to put manually and/or using blindscan.

Example:

45°W

IMG_20210225_090407.jpg (60.44 KiB) Viewed 1618 times

75°W

IMG_20210225_090802.jpg (168.16 KiB) Viewed 1618 times

Thx

[cpr43]

Yes, it does revert to 1000 automatically

@Tom
please take note and look for this, Thks

[frankviana]

Any news?

Thx

[cpr43]

Any news?

Thx

Message resent to Alex

[Feralkiwi]

Yes, it does revert to 1000 automatically

@Tom
please take note and look for this, Thks

As for the "it does revert to 1000 automatically", that may be because the option in the menus to turn off "Auto TP update" is ON.

frankviana, Have you tried using the channel editor on your PC to change the SR?

Owen

[frankviana]

I'll try.
Thx

[STRETCH]

Have you tried putting (00) in front of the symbol rate, it is like when you are feed hunting, some feeds are (7120), you have to put in (0) for the receiver to find.

Den

[frankviana]

No way to input values (receiver or db editor)...

Sem título.png (19.67 KiB) Viewed 1340 times

[frankviana]

Yes, it does revert to 1000 automatically

@Tom
please take note and look for this, Thks

As for the "it does revert to 1000 automatically", that may be because the option in the menus to turn off "Auto TP update" is ON.

frankviana, Have you tried using the channel editor on your PC to change the SR?

Owen

No luck to insert or modify.

[Feralkiwi]

Yes, it does revert to 1000 automatically

@Tom
please take note and look for this, Thks

As for the "it does revert to 1000 automatically", that may be because the option in the menus to turn off "Auto TP update" is ON.

frankviana, Have you tried using the channel editor on your PC to change the SR?

Owen

No luck to insert or modify.

I past days I would use a hex editor and change the.bin file, but they have a check sum now days that I have not worked out.

Owen

[Tom.w]

we will modify this issue on the next firmware and update the db tool.

[frankviana]

Maybe fix signal lock using blindscan.

Example: 100 ~ 60000. Actually, accepts 60.000, but no lock. Hardware or software limitation?

Thanks

[frankviana]

If you have 16E and 45w, good way to test

Code: Select all

https://www.lyngsat.com/muxes/Eutelsat-16A_Europe-A_110716-H.html

[STRETCH]

Had a go at getting a low rate at 16e 11071h 547 with the new software v226 7 APR 2021.
Was able to get the transponder details into the receiver, BUT was not able to get a lock onto the signal.

Den

[frankviana]

I did tests after software update:

No signal for SR 480

WhatsApp Image 2021-04-09 at 09.19.20 (1).jpeg (108.75 KiB) Viewed 1167 times

sf8008

WhatsApp Image 2021-04-09 at 09.19.20.jpeg (80.46 KiB) Viewed 1167 times

Symbol rate 651 and 740 OK after about 30 seconds and sometimes freezing


651

WhatsApp Image 2021-04-09 at 09.19.21.jpeg (83.95 KiB) Viewed 1167 times

740

WhatsApp Image 2021-04-09 at 09.19.20 (3).jpeg (78.65 KiB) Viewed 1167 times