oscam on v8 uhd
Moderators: admin, GTMedia Team
oscam on v8 uhd
v8 UHD, how to install Oscam on the receiver?
Re: oscam on v8 uhd
Hello and Welcome
V8UHD works using softcam.key file not Oscam. Oscam is usually used on Enigma2/android models. Here are some instructions How to..
viewtopic.php?f=67&t=12407
Take a minute and read forum rules here:
viewtopic.php?f=47&t=16325
Re: oscam on v8 uhd
Hello,
Thanks, I've seen it all!
But Sky Germany doesn't work well, the picture always stops.
I complained and get the answer: For a good picture need I the OScam.
Thanks, I've seen it all!
But Sky Germany doesn't work well, the picture always stops.
I complained and get the answer: For a good picture need I the OScam.
Re: oscam on v8 uhd
You need a faster line to watch skyde channels.
If you can't find a faster cline, you can turn on the TS delay function to make the TS "slower".
You can find TS delay function at Setting->CA System->TS delay.
If you can't find a faster cline, you can turn on the TS delay function to make the TS "slower".
You can find TS delay function at Setting->CA System->TS delay.
Re: oscam on v8 uhd
Hi,
with the delay everything is dark
with the delay everything is dark
Re: oscam on v8 uhd
yes i also experienced that
Re: oscam on v8 uhd
What's the time that you set for TS delay?
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: oscam on v8 uhd
It depends on your network stuation.
You should increase the time step by setp until you don't see any freezing.
You should increase the time step by setp until you don't see any freezing.
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: oscam on v8 uhd
Ohh... Thank you very much
Best regards
Best regards
Re: oscam on v8 uhd
Hello,
I test 0,6 / 0,8 / 1,00 sec, but egal if the TS on all is dark.
I must new boot for I can look TV again
I test 0,6 / 0,8 / 1,00 sec, but egal if the TS on all is dark.
I must new boot for I can look TV again
Re: oscam on v8 uhd
if you want to watch sky de you need to to put cw checksum off if that option is on you not gonna open those channels
Re: oscam on v8 uhd
hallo bin ich auch dran und keine ahnung wie ich es machen soll ?? habe eine osacm.server file aber wo hin ?? habe von osacm auch noch nichts gesehn i der
box nur andere cams ?? bitte um hilfe sollte alles in eine softcam.kex datein rein aber wie : lg thomas
Re: oscam on v8 uhd
Currently, the IKS issue is viral in several satellite receiver units, will the V8UHD unit also adopt it in the future?
Re: oscam on v8 uhd
The stops are caused by the protocols when reading CW waiting that do not have the CAID, in which you deactivate them, also watch those protocols that have 4 to 8 clines that the last ones do not work and you should turn it OFF directly
Re: newcam on v8 uhd
does v8UHD not support Videocon ST2 KU ch band?
I just bought a newcam client and tried to input it to v8uhd, it was connected properly but the tv screen was dark, there was no video audio at all.
Please advice.
I just bought a newcam client and tried to input it to v8uhd, it was connected properly but the tv screen was dark, there was no video audio at all.
Please advice.
- Attachments
-
- P_20210410_131458.jpg (859.05 KiB) Viewed 1429 times
-
- P_20210410_131518.jpg (957.14 KiB) Viewed 1429 times
-
- Posts: 272
- Joined: Tue Sep 24, 2019 3:01 pm
Re: oscam on v8 uhd
Ok bro it's clear now, thank you for your information.