oscam on v8 uhd

[diddy]

v8 UHD, how to install Oscam on the receiver?

[cpr43]

v8 UHD, how to install Oscam on the receiver?

Hello and Welcome

V8UHD works using softcam.key file not Oscam. Oscam is usually used on Enigma2/android models. Here are some instructions How to..

viewtopic.php?f=67&t=12407

Take a minute and read forum rules here:

viewtopic.php?f=47&t=16325

[diddy]

Hello,

Thanks, I've seen it all!
But Sky Germany doesn't work well, the picture always stops.
I complained and get the answer: For a good picture need I the OScam.

[alex.c]

You need a faster line to watch skyde channels.
If you can't find a faster cline, you can turn on the TS delay function to make the TS "slower".
You can find TS delay function at Setting->CA System->TS delay.

[diddy]

Hi,
with the delay everything is dark

[satcodx]

yes i also experienced that

[alex.c]

What's the time that you set for TS delay?

[ghani Ajja]

What's the time that you set for TS delay?

How long time it's very good for TS Delay Friend ??
Thank for your information
Best regards

[alex.c]

It depends on your network stuation.
You should increase the time step by setp until you don't see any freezing.

[ghani Ajja]

Ohh... Thank you very much
Best regards

[diddy]

Hello,

I test 0,6 / 0,8 / 1,00 sec, but egal if the TS on all is dark.
I must new boot for I can look TV again

[acko33]

if you want to watch sky de you need to to put cw checksum off if that option is on you not gonna open those channels

[alex.c]

Hello,

I test 0,6 / 0,8 / 1,00 sec, but egal if the TS on all is dark.
I must new boot for I can look TV again

Sorry, we will figure it out ASAP.

[atvdriver]

v8 UHD, how to install Oscam on the receiver?

hallo bin ich auch dran und keine ahnung wie ich es machen soll ?? habe eine osacm.server file aber wo hin ?? habe von osacm auch noch nichts gesehn i der
box nur andere cams ?? bitte um hilfe sollte alles in eine softcam.kex datein rein aber wie : lg thomas

[alex.c]

Hello,

I test 0,6 / 0,8 / 1,00 sec, but egal if the TS on all is dark.
I must new boot for I can look TV again

The latest firmware fixed this TS delay function.
Please check it again.
Thanks.

[dsr9105]

Currently, the IKS issue is viral in several satellite receiver units, will the V8UHD unit also adopt it in the future?

[CAJE]

Hello,

Thanks, I've seen it all!
But Sky Germany doesn't work well, the picture always stops.
I complained and get the answer: For a good picture need I the OScam.

The stops are caused by the protocols when reading CW waiting that do not have the CAID, in which you deactivate them, also watch those protocols that have 4 to 8 clines that the last ones do not work and you should turn it OFF directly

[dsr9105]

does v8UHD not support Videocon ST2 KU ch band?
I just bought a newcam client and tried to input it to v8uhd, it was connected properly but the tv screen was dark, there was no video audio at all.
Please advice.

[ghani Ajja]

does v8UHD not support Videocon ST2 KU ch band?
I just bought a newcam client and tried to input it to v8uhd, it was connected properly but the tv screen was dark, there was no video audio at all.
Please advice.

Helo,
Skip cw checksum -- ON

[dsr9105]

Ok bro it's clear now, thank you for your information.