V8 uhd boot problem
Moderators: admin, GTMedia Team
V8 uhd boot problem
Hola, tengo un problema con mi v8 uhd.
Al estar en modo standby (cuando lo apagas y muestra la hora en la pantalla), al querer encenderlo no bootea, se queda en el logo de gtmedia algunas veces, otras veces arranca sin problemas.
Lo que tengo que hacer cuando me pasa esto es cortarle la corriente.
Ya actualicé al último firmware disponible y me sigue ocurriendo.
Alguna sugerencia? El dispositivo tiene 3 meses de uso
Al estar en modo standby (cuando lo apagas y muestra la hora en la pantalla), al querer encenderlo no bootea, se queda en el logo de gtmedia algunas veces, otras veces arranca sin problemas.
Lo que tengo que hacer cuando me pasa esto es cortarle la corriente.
Ya actualicé al último firmware disponible y me sigue ocurriendo.
Alguna sugerencia? El dispositivo tiene 3 meses de uso
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
hello
can you take a photo of the box SN?
and can you take a video when this issue is happened?
and after you owned this device,this issue is alway happened or after upgrade some firmware,this issue is happened.
can you take a photo of the box SN?
and can you take a video when this issue is happened?
and after you owned this device,this issue is alway happened or after upgrade some firmware,this issue is happened.
Re: V8 uhd boot problem
Entré a los ajustes y desactivé algunas opciones como plsn y auto update channel. De momento no me está pasando más, si vuelve a ocurrir envio un video a youtube ya que es muy raro esto.
Saludos y gracias por la respuesta, estaré al tanto
Saludos y gracias por la respuesta, estaré al tanto
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Very early software versions had an issue if you set the menu option for power on to stand by, it would not then power on with the remote.
What version software are you using?
Owen
What version software are you using?
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 uhd boot problem
Me acaba de volver a ocurrir este problema. Estoy usando el último firmware. El problema ocurre cuando está muchas horas en standby. El problema es que ocurre una vez sola y tengo que cortar la corriente, luego enciende.
Intentaré grabar video cada vez que enciendo el aparato, a ver si logro capturar cuando ocurre (es random).
Estoy usando el último firmware disponible a la fecha, también me pasaba con el anterior a este.
El número que veo en la caja es: X002NQ9SQH, no sé si será el número de serie.
Intentaré grabar video cada vez que enciendo el aparato, a ver si logro capturar cuando ocurre (es random).
Estoy usando el último firmware disponible a la fecha, también me pasaba con el anterior a este.
El número que veo en la caja es: X002NQ9SQH, no sé si será el número de serie.
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Agrego info: el problema es que se queda trancado en las letras GTMEDIA en el boot.
Además como que le cuesta llegar a ese punto, y de ahí no sale si no es quitando la corriente. Más tarde voy a intentar dejarlo de fábrica, instalar nuevamente el firmware, y volver a dejarlo de fábrica, pero dudo que solucione algo porque ya lo había hecho.
Además como que le cuesta llegar a ese punto, y de ahí no sale si no es quitando la corriente. Más tarde voy a intentar dejarlo de fábrica, instalar nuevamente el firmware, y volver a dejarlo de fábrica, pero dudo que solucione algo porque ya lo había hecho.
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
El firmware es: GTMedia_V8UHD_V227_20210421(1)
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Serial number: v8uc2007000597
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Yes, I just did it (install the latest firmware available to date) and then I just did 3 factory resets.cpr43 wrote: ↑Sun Jun 06, 2021 6:04 pmHas tratado de hacer un Factory Reset y Reinstalar el bin mas reciente?:
viewtopic.php?f=40&t=19117
I will notify these days if it happens again, but I have done the same before.
Greetings
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Try powering on with the LNB cable disconnected.
If you have no issues with the cable disconnected, try a larger power supply.
Many users report that using a 2A 12V power supply fixes these issues.
I think at start up the processor is running full and if there is other power use like a USB stick, when the LNB power is turned on the main power can drop and crash the processor.
What kind of LNB do you have? Another user that fixed with a 3A power supply had a multi user LNB that I would think uses a lot of power at start up.
Owen
If you have no issues with the cable disconnected, try a larger power supply.
Many users report that using a 2A 12V power supply fixes these issues.
I think at start up the processor is running full and if there is other power use like a USB stick, when the LNB power is turned on the main power can drop and crash the processor.
What kind of LNB do you have? Another user that fixed with a 3A power supply had a multi user LNB that I would think uses a lot of power at start up.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 uhd boot problem
Excelente, gracias por el dato. Le voy a cambiar a una fuente de 2A que tengo por casa. Tengo un lnb universal ku de dos salidas, común. Pero sí tengo muchos metros de cable (tampoco un disparate pero son bastantes). Me suena que puede estar ocurriendo eso ya que no sucede siempre. No tengo dispositivos usb conectadosFeralkiwi wrote: ↑Sun Jun 06, 2021 9:17 pmTry powering on with the LNB cable disconnected.
If you have no issues with the cable disconnected, try a larger power supply.
Many users report that using a 2A 12V power supply fixes these issues.
I think at start up the processor is running full and if there is other power use like a USB stick, when the LNB power is turned on the main power can drop and crash the processor.
What kind of LNB do you have? Another user that fixed with a 3A power supply had a multi user LNB that I would think uses a lot of power at start up.
Owen
Voy a intentar.
Mantendré informado.
Además esto comenzó a ocurrir desde que cambié la habitación en donde estaba el deco, donde le conecto otro lnb distinto al que usaba antes, quizás sea eso nomás.
Saludos
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Buenas, el problema volvió a suceder luego de dejar de fabrica e instalar el nuevo firmware otra vez.
Acabo de cambiar a una fuente de 12V 2A. Como dato extra agrego que tengo un v7 plus conectado al mismo LNB y este no tiene dramas.
Vamos a ver qué sucede en estos días. Se puede ver en mi firma que tengo 3 equipos de estos y este es el primero que me da una falla de este tipo, voy a colaborar con todos los datos que pueda.
Saludos
Acabo de cambiar a una fuente de 12V 2A. Como dato extra agrego que tengo un v7 plus conectado al mismo LNB y este no tiene dramas.
Vamos a ver qué sucede en estos días. Se puede ver en mi firma que tengo 3 equipos de estos y este es el primero que me da una falla de este tipo, voy a colaborar con todos los datos que pueda.
Saludos
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Volvió a suceder. Esta vez sin cable de lnb conectado ni nada extra. Sucede cuando esta uno o dos días en standby y lo prendo. Ya no sé que más hacer, parece una falla del hardware. También cambié el adaptador de corriente e igual sucede. Grabé un video, luego lo posteo
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Alguna idea de qué puedo hacer?
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Trata instalando un bin viejo a ver
- Attachments
-
- GTMedia_V8UHD_20200806_V207.zip
- (4.84 MiB) Downloaded 21 times
-
- GTMedia_V8UHD_20200624_V202.zip
- (4.77 MiB) Downloaded 13 times
-
- GTMedia_V8UHD_20200514_v173-Factory.rar
- (4.73 MiB) Downloaded 25 times
Re: V8 uhd boot problem
Ok, lo intentaré.
A dónde puedo subir el video que grabé? Youtube?
https://www.youtube.com/watch?v=BGd5jgyBACU
Gracias!
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Parece ser un tema de la longitud del cable. Lo prendí sin cable conectados estos días y arrancó bien. Mientras que con cable suele fallar.
Quizás debería comprar una fuente bastante más potente.
De momento lo dejaré así, pero parece que con 2A no llega a ser suficiente.
Quizás debería comprar una fuente bastante más potente.
De momento lo dejaré así, pero parece que con 2A no llega a ser suficiente.
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
When you turn on the UHD with the remote, does this then make your TV also turn on from standby?
It may be the power surge as the TV powers on.
If your TV does power on as you power on the UHD, are you connected by HDMI cable or AV?
If as above, try powering on the TV first and then the UHD.
Do you have any USB things plugged into the UHD box? Hard drive or stick?
This will add to the power on surge.
If you have a splitter that is UHF frequency (950-2400MHz, or 40-2400Mhz), try placing that in the LNB cable at the UHD connection.
This will add some impedance and may stop the LNB over current trip.
Do you have the UHF DVB-T cable connected?
Do you have the Antenna power for the UHF DVB-T "ON" in the DVBT menus?
It needs to be ON only if you have an amplifier in the DVB-T cable.
If your LNB / dish cable is shared with the UHF DVB-T antenna cable, Antenna power On can cause issues with the LNB power if you do not have the correct wiring.
Owen
It may be the power surge as the TV powers on.
If your TV does power on as you power on the UHD, are you connected by HDMI cable or AV?
If as above, try powering on the TV first and then the UHD.
Do you have any USB things plugged into the UHD box? Hard drive or stick?
This will add to the power on surge.
If you have a splitter that is UHF frequency (950-2400MHz, or 40-2400Mhz), try placing that in the LNB cable at the UHD connection.
This will add some impedance and may stop the LNB over current trip.
Do you have the UHF DVB-T cable connected?
Do you have the Antenna power for the UHF DVB-T "ON" in the DVBT menus?
It needs to be ON only if you have an amplifier in the DVB-T cable.
If your LNB / dish cable is shared with the UHF DVB-T antenna cable, Antenna power On can cause issues with the LNB power if you do not have the correct wiring.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 uhd boot problem
Hola, mis ajustes son:
Alimentación LNB: Encendido
Antenna Power: Apagado.
Luego todo apagado, excepto por panel led, que está encendido.
La instalación es una instalación normal de banda KU, con un diseqc común, Diseqc1.0, el cual tiene conectado dos satelites (nada fuera de lo normal). No es una antena compartida. Tengo otros 2 freesat en mi casa (a otras antenas) y el único que presenta este problema es el v8 uhd.
Lo que sí es cierto, es que tiene bastante cable (no sé bien la cantidad de metros, pero es bastante, tampoco algo exagerado).
Por lo demás ya se dejó de fábrica, se probó otro firmware, y es lo mismo.
Supongo que con una fuente de 3A quizás no tenga problema, pero no dispongo de la misma para hacer pruebas.
Respecto a la TV, he probado eso que comentas, y estando la misma apagada (sin siquiera prenderla) ocurre lo mismo.
La TV está por HDMI.
De momento lo dejaré así, ya que si bien es molesto, al segundo intento suele prender.
Saludos
Alimentación LNB: Encendido
Antenna Power: Apagado.
Luego todo apagado, excepto por panel led, que está encendido.
La instalación es una instalación normal de banda KU, con un diseqc común, Diseqc1.0, el cual tiene conectado dos satelites (nada fuera de lo normal). No es una antena compartida. Tengo otros 2 freesat en mi casa (a otras antenas) y el único que presenta este problema es el v8 uhd.
Lo que sí es cierto, es que tiene bastante cable (no sé bien la cantidad de metros, pero es bastante, tampoco algo exagerado).
Por lo demás ya se dejó de fábrica, se probó otro firmware, y es lo mismo.
Supongo que con una fuente de 3A quizás no tenga problema, pero no dispongo de la misma para hacer pruebas.
Respecto a la TV, he probado eso que comentas, y estando la misma apagada (sin siquiera prenderla) ocurre lo mismo.
La TV está por HDMI.
De momento lo dejaré así, ya que si bien es molesto, al segundo intento suele prender.
Saludos
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
Freesat v8 super
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
GtMedia v8 uhd
GtMedia v7 plus
Azbox premium hd+ (Enigma2)
Az s900
81w 70w 61w 15w
Re: V8 uhd boot problem
hello
is it possible to use null modem cable with usb
is it possible to use null modem cable with usb
Re: V8 uhd boot problem
Yes.
I used one of those to recover my V7Pro.
Here is a link to the rs232 software.
Here is a link to my report on RS232 for the older finder.
this shows how i made a plug for the RS232 circuit board port.
Note the edit at the bottom about the USB to RS232
Here is a pic of the UHD circuit board showing the RS232 port.
.
.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 uhd boot problem
About 2 weeks after receiving my V8 UHD I turned off the unit, and when I tried to turn it on again, I only got the green light and nothing else. I posted several times and also sent GTMedia several e-mails about the unit dying, but no response. (I bought this unit direct from GTMedia.) After a couple weeks and no response to things to try, I just bought a new unit and it has worked quite well. I ran across this thread and decided to see if I could revive my first STB. I was able to use an old audio cable connector to connect to the 3 pin serial connection on the motherboard. It required a cross-over connector to make the connection. I ran the V8UHD Upgrade Tool software using a serial port. I tried to load one of the latest upgrade bin files. The GTMedia guide for updating was great and showed what to expect. On starting I get a message "init stream start ----- done" and then "start loading eprom client ----- done". After a few seconds the message "got set stb memory error, try again". All my attempts do the same thing. Is my unit really dead or am I doing something wrong? How do I get GTMedia to replace this unit? Or am I just SOL?
Re: V8 uhd boot problem
Check that you have the correct "Port" set for your PC / laptop for the RS232 software.
I made some notes on this at the end of my instruction for the Finder.
there are links in my post above yours.
Did you try older versions of software.
I also found with the UHD that if I had too many file (.bin) on the USB stick, the UHD did not find the file I wanted.
Move all but the flash.bin or the named.bin file as needed off the main directory into a folder and leave just the flash,bin file for the UHD.
Owen
I made some notes on this at the end of my instruction for the Finder.
there are links in my post above yours.
Did you try older versions of software.
I also found with the UHD that if I had too many file (.bin) on the USB stick, the UHD did not find the file I wanted.
Move all but the flash.bin or the named.bin file as needed off the main directory into a folder and leave just the flash,bin file for the UHD.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.