Sin señal Satelital
Moderators: admin, GTMedia Team
Sin señal Satelital
hola buenas, tengo un decodificador freesat v8 super con firmware con fecha 22/08/2019 he buscado a ver si encontraba nueva actualización pero con el nombre de mi receptor no me sale nada, a ver si alguien le paso lo mismo y me puedan ayudar! hace como una semana se me fue la señal de mi parabólica individual, calidad que me pone Q 0% y solo tiene S 60%, directamente cambie el lnb y el cable que se encuentra al descubierto en la terraza y cambiando de posición la antena y redirigiendo de nuevo la antena, y aun asi sigue con la misma señal que ya comente
Re: Sin señal Satelital
As you say, the last update for the V8 Super was Aug 2019.
With you changing the lnb/cable etc, you may have moved the dish a little, check out (dishpointer), put in your area code and the satellite you wish to receive, then put the (x) cross to were you have your dish, and see were it is pointing, also it gives the skew details of the lnb, elevation of the dish, any obstruction which may stop the signal etc.
Make sure all the settings are correct within the receiver.
Good Luck
Den
With you changing the lnb/cable etc, you may have moved the dish a little, check out (dishpointer), put in your area code and the satellite you wish to receive, then put the (x) cross to were you have your dish, and see were it is pointing, also it gives the skew details of the lnb, elevation of the dish, any obstruction which may stop the signal etc.
Make sure all the settings are correct within the receiver.
Good Luck
Den