GTMEDIA V8UHD Firmware (27/09/2021)
Moderators: admin, GTMedia Team
GTMEDIA V8UHD Firmware (27/09/2021)
Hi,How are you?
I have just install the new firmware and I find these conclusions
All problems found by now on the GTMEDIA V8 UHD receiver
Gtmedia V8 UHD issues:
Microfreeze images in combo channels and on some satellite channels too NOT SOLVED
Sometimes remote control delay reaction MAYBE SOLVED IT DOESN´T REPEAT AGAIN
Subtitles center-middle position, they are not posicionated center down NOT SOLVE
The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly NOT SOLVED
When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make NOT SOLVED
When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are) SOLVED
Legend speed when you plug usb device "device speed too low to record" NOT SOLVED
Sometimes legend volume stays on screen and you must buttom exit to close MAYBE SOLVED IT DOESN´T REPEAT AGAIN
The new problema in COMBO CHANNEL sometimes the receiver freeze and restarts itself NOT SOLVED
I have just install the new firmware and I find these conclusions
All problems found by now on the GTMEDIA V8 UHD receiver
Gtmedia V8 UHD issues:
Microfreeze images in combo channels and on some satellite channels too NOT SOLVED
Sometimes remote control delay reaction MAYBE SOLVED IT DOESN´T REPEAT AGAIN
Subtitles center-middle position, they are not posicionated center down NOT SOLVE
The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly NOT SOLVED
When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make NOT SOLVED
When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are) SOLVED
Legend speed when you plug usb device "device speed too low to record" NOT SOLVED
Sometimes legend volume stays on screen and you must buttom exit to close MAYBE SOLVED IT DOESN´T REPEAT AGAIN
The new problema in COMBO CHANNEL sometimes the receiver freeze and restarts itself NOT SOLVED
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Legend speed when you plug usb device "device speed too low to record" NOT SOLVED
Change that bad USB and put one in condition
Change that bad USB and put one in condition
Re: GTMEDIA V8UHD Firmware (27/09/2021)
1. Solve the problem of bit error rate program playback DLNA ---> NO
Re: GTMEDIA V8UHD Firmware (27/09/2021)
3. Support fast forward and rewind
-In Video everything correct
-In PVR in Fast forward the video does not work
-You cannot record one program and watch another, much less make two recordings and watch another,in 228 if
-In Video everything correct
-In PVR in Fast forward the video does not work
-You cannot record one program and watch another, much less make two recordings and watch another,in 228 if
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Information error in Wifi always comes out Ethernet disconnected and Ethernet connected instead of Wi-Fi disconnected and Wi-Fi connected
Re: GTMEDIA V8UHD Firmware (27/09/2021)
The problems with this V8UHD decoder are not best and as a user who has recently bought the product I cannot use the decoder for all the firmware bugs, I wish I could understand why the remote control goes slower and less fluid than an app downloaded from the PlayStore that I use to operate instead of the classic remote control by starting the mobile phone equipped with an infrared port which from my experience of use proves to be better, there is work to be do to make it usable in everyday life, this post is not an open testimony, which makes the decoder not very appreciable over time by opting for something more usable, you must fix these problems if you want me not to throw it in the landfill, indeed you have to rewrite all the software by implementing a light operating system with some apps of the PlayStore TV otherwise I do make XDA firmware better than yours hahahahaha
DanieleM
Re: GTMEDIA V8UHD Firmware (27/09/2021)
The V8UHD does the job, if you wanted PlayStore you should have bought the Gtmedia Combo which is what you need
Re: GTMEDIA V8UHD Firmware (27/09/2021)
DVBT channels are not tuned to 498 MHz (CH24 Russia), the antenna power is not turned off - everything worked before, but does not allow you to return to an earlier firmware ... What should I do?
GTMedia V8 UHD[P] ; S/W ver Oct 30 2020
Re: GTMEDIA V8UHD Firmware (27/09/2021)
More detailed:
GTMEDIA V8UHD is connected through a splitter to a DVBT2 antenna with its own amplifier (parameter Antenna Power = OFF), 3 more TVs are connected to the same splitter. When GTMEDIA V8UHD is turned off, these TVs show 30 TV channels (498, 546, 578 MHz). When GTMEDIA V8UHD is turned on, all TVs lose 10 channels at 498 MHz, and he himself does not see any signal at this frequency ...
GTMedia V8 UHD[P] ; S/W ver Oct 30 2020
Re: GTMEDIA V8UHD Firmware (27/09/2021)
That does sound like the antenna power is set to "ON".
This option is in the DVB-T menu.
Another way this could happen is if the cable to the roof is shared by both the UHF DVB-T antenna AND the satellite to the LNB / dish.
If the correct connection through a non power pass splitter is not used the LNB power will stop the DVB-T amp from working.
Also check that the cable to the UHD DVB-T connection is not shorted.
Do you have the DVB-T and satellite cable to the UHD the correct way around. If you connect the satellite cable to the UHF Antenna it will stop the TV's seeing channels.
First check the DVB-T menu for the antenna power setting.
Owen
This option is in the DVB-T menu.
Another way this could happen is if the cable to the roof is shared by both the UHF DVB-T antenna AND the satellite to the LNB / dish.
If the correct connection through a non power pass splitter is not used the LNB power will stop the DVB-T amp from working.
Also check that the cable to the UHD DVB-T connection is not shorted.
Do you have the DVB-T and satellite cable to the UHD the correct way around. If you connect the satellite cable to the UHF Antenna it will stop the TV's seeing channels.
First check the DVB-T menu for the antenna power setting.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Thanks, all worked well. Really the problem was with the cable or connections, it helped when everything was re-screwed. One thing is not clear to me why this affected only one frequency out of three?
GTMedia V8 UHD[P] ; S/W ver Oct 30 2020
Re: GTMEDIA V8UHD Firmware (27/09/2021)
I have a deco GTMEDIA V8 NOVA ORANGE and just install the new firmware and I find this problem:
When the decoder starts, it is seen on its "boot" screen, then it goes to "L009, L021, L025 and ends with L093" but it stays with the black screen on the TV.
I have tried to recover it with the flash.bin files and pressing the Menu button repeatedly but it does not start.
Is there a solution or do I have to throw it away
When the decoder starts, it is seen on its "boot" screen, then it goes to "L009, L021, L025 and ends with L093" but it stays with the black screen on the TV.
I have tried to recover it with the flash.bin files and pressing the Menu button repeatedly but it does not start.
Is there a solution or do I have to throw it away
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Trying with more firmwares renamed to flash.bin, you have to be patient not all firmwares restore it, you may need a minimum of 4 firmwares to restore it
Re: GTMEDIA V8UHD Firmware (27/09/2021)
and where I can download several firmware for me to go test.
or with which I have to insist until one of them works properly
or with which I have to insist until one of them works properly
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Re: GTMEDIA V8UHD Firmware (27/09/2021)
@angosan3
With ref to your issue with your V8 NOVA ORANGE.
It would be best to start a new thread, you have posted in a thread which is for the V8UHD receiver.
Den
With ref to your issue with your V8 NOVA ORANGE.
It would be best to start a new thread, you have posted in a thread which is for the V8UHD receiver.
Den
Re: GTMEDIA V8UHD Firmware (27/09/2021)
This can happen with the weakest frequency.
It may have been the outer connection, the ground that was not connected.
If you have screw on connectors, check them as the small wires can break off and drop into the center wire to make a short, or just leave no ground connection.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Every time I change the channel from TDT to SATELLITE I get the annoying list with the 30 channels to press OK
can't you go directly to the channel?
can't you go directly to the channel?
Re: GTMEDIA V8UHD Firmware (27/09/2021)
Add the ones you like to a favorites list and change channel with in the favorites list.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.