Page 1 of 1
GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 3:16 pm
by jk1919
Witam wszystkich
Może ktoś pomóc, cały czas zacinają się kanały próbowałem wszystkie softy i na kazdym jest to samo,może ktoś miał taki problem i go zdołał rozwiązać z góry wielkie dzięki.
Hello everyone
Maybe someone help, channels are jammed all the time, I tried all the softs and each is the same, maybe someone had such a problem and managed to solve it thanks in advance.
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 3:35 pm
by CAJE
Hello, there is an option in the protocols by pressing the information key, the ECM information comes out, that will give a clue of what can happen
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 3:56 pm
by jk1919
how to do it to get in there
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 4:02 pm
by jk1919
it is good if something needs to be changed so that the channels do not jam and where to do it
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 4:17 pm
by jk1919
I was able to run smoothly
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 5:50 pm
by CAJE
jk1919 wrote: ↑Mon Jun 20, 2022 4:02 pm
it is good if something needs to be changed so that the channels do not jam and where to do it
They are very bad data, very bad internet whether it is by Wi-Fi or by Ethernet
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 5:53 pm
by jk1919
however, he keeps stuttering so he needs help
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 5:55 pm
by jk1919
CAJE wrote: ↑Mon Jun 20, 2022 5:50 pm
jk1919 wrote: ↑Mon Jun 20, 2022 4:02 pm
it is good if something needs to be changed so that the channels do not jam and where to do it
They are very bad data, very bad internet whether it is by Wi-Fi or by Ethernet
Ethernet
Re: GtMedia v8x Kanały się zacinają
Posted: Mon Jun 20, 2022 6:36 pm
by CAJE
Change the Ethernet cable or check the connection, it will not make good contact the pins
Re: GtMedia v8x Kanały się zacinają
Posted: Wed Jun 22, 2022 6:09 am
by jk1919
nic to nie dało