I have a Freesat V8 Super which works great. I have a softcam installed. I would like to enter the A F N keys manually without importing/exporting the softcam every time.
I have tried manually entering the A F N keys with the remote but cannot get it to work. I have spent at least 2 hours on the forum reading old posts, but cannot find anything specifically for the V8 Super.
I appreciate all help.
Freesat V8 Super PowerVu keys
Moderators: admin, GTMedia Team
Re: Freesat V8 Super PowerVu keys
A F N does not clear on any of the GTMedia receivers, xxxxxx even with the keys on line, which change every few hours, because the (auto-roll)does not work, xxxxxxx
Den
Den
Re: Freesat V8 Super PowerVu keys
After you load the correct current keys cut your box off and then back on and you should get it.
Re: Freesat V8 Super PowerVu keys
As Leehrat mentioned. You need to turn off/on or power off/on after entering the keys. Also, make sure there is room on the PV key section. Deleting a few older ones will help
-
- Posts: 14
- Joined: Thu Apr 26, 2018 2:58 am
Re: Freesat V8 Super PowerVu keys
The power off/on worked!
Thanks to everyone for replying.
Thanks to everyone for replying.
-
- Posts: 10
- Joined: Sat Jun 25, 2022 2:07 am
Re: Freesat V8 Super PowerVu keys
Can someone share a demo softcam.key file, or if you can share 58W TP3880 PowerVU keys for discovery.
Regards
Regards
Re: Freesat V8 Super PowerVu keys
Here is a link to my instruction on softcam entry for the older V8 Golden.proyectoHU wrote: ↑Sat Jul 09, 2022 2:31 amCan someone share a demo softcam.key file, or if you can share 58W TP3880 PowerVU keys for discovery.
Regards
The system is still much the same.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.