Mars firmware Topic

[sickboy]

Exactly and that is why I told him he is using the wrong software.

[CAJE]

Software viewtopic.php?f=51&t=20721
Connector DB9 to JST, USB to JST

I recommend that you do not do it, Mars works much better

[sickboy]

Not certain but I believe this is the proper software for the V8UHD. Try the second link first as it's the newer version.

viewtopic.php?f=51&t=20721

And here is how to wire it up.

viewtopic.php?f=51&t=28037

[MAVERIC]

I do everything you write about. Nothing works. In V8UHD upgrade tool, the tuner does not see the computer, in GTmedia v8v7 it is what is in the picture.

[MAVERIC]

Error 0x80000200 is common on both programs!

[STRETCH]

May have to use Windows 7, issues with Windows 10.
Check using the (search box).

Den

[CAJE]

I do everything you write about. Nothing works. In V8UHD upgrade tool, the tuner does not see the computer, in GTmedia v8v7 it is what is in the picture.

Remove Tftp

[MAVERIC]

Tftp removed. Windows 7. Programs SEND_UPG, Tcom, STB EROM Upgrade 2.2.2. Everywhere error as in the picture.

[MAVERIC]

I also swapped the TX and RX pins.

[CAJE]

The file is loaded by the program in the location of the hdd of the PC

[Thecrokx]

Hi, another report:
after the last update, V8X Mars still collapsing while watching channels.

[innesat]

What do you mean with "collapsing"?

[mietkacda]

how can i add one channel from a given transponder or how to add channels from a selected transponder so that they will be saved at the end of my channel list?

[STRETCH]

Depending on what receiver you have, the V8UHD puts the new channels at the (front) of the channel list, as with the V8X it does put the channels at the back of the channel list.
There are various ways to scan a transponder, depending on what the channel is broadcasting as, and how many are in that group, some times you may get lucky and just scan in the one channel, which may be the one that you require.

Den

[Isbaltar]

Atualisei o v8uhd para versão mars e quero voltar velho software V238. Tentei de todas maneiras rs232 por usb e nao consegui volta a old software V238. poderiam disponibilisar dados para regravaçao de eprom para old software V238.

[sickboy]

The .bin file itself is the file to write to the eeprom but the result will likely be you will overwrite your serial number and other unique information. If you don't need the serial number for a cccam server then don't worry about it.

You can always ask the staff for a personalized eeprom later with your serial number and you will be able to write that with a usb stick, rs232 will not be necessary.

[freeshooter]

how can i add one channel from a given transponder or how to add channels from a selected transponder so that they will be saved at the end of my channel list?

The answer to your question is here:
viewtopic.php?f=33&t=27717&p=126504#p126504

[mietkacda]

how can i add one channel from a given transponder or how to add channels from a selected transponder so that they will be saved at the end of my channel list?

The answer to your question is here:
viewtopic.php?f=33&t=27717&p=126504#p126504

Unfortunately, I have the latest version and I don't have that option.

[Isbaltar]

Ok obrigado. Não uso cccam. Uso somente powervu bis fta. Se entedi bem posso uzar qualquer atualizaçao da versão anterior e regravar numa gravadora de eprom e o V8UHD iniciarar nomalmente na versão anteror.

[freeshooter]

Unfortunately, I have the latest version and I don't have that option.

What is the receiver model?
What version of Mars software?
In the latest version of the Mars software, there is an option to disable the LCN

[mietkacda]

Unfortunately, I have the latest version and I don't have that option.

What is the receiver model?
What version of Mars software?
In the latest version of the Mars software, there is an option to disable the LCN

I don't have lcn in system settings
menu language, audio 1,2, subtitle language, etc
however, I care about adding new channels at the beginning or at the end of the current list, unfortunately, when I add a channel, the whole list is sorted by transponders, not according to my previous list +new channels.

[MAVERIC]

System settings, ok, down arrow, you will enter the next page. There is the LCN.

[freeshooter]

I don't have lcn in system settings
menu language, audio 1,2, subtitle language, etc

Everything is fine.
I also once thought that there was no LCN in the settings.
THE SYSTEM SETTINGS MENU HAS SEVERAL PAGES.There are 4 pages. Do you understand?There are 4 pages. They need to be scrolled through with the PG buttons.
I wrote "page down with the PG + - button" in that post. Or, as you correctly pointed out "System settings, ok, down arrow, you will enter the next page. There is the LCN."(Thanks MAVERIC!)
This will take you to the second settings page.
And if you read the topic completely, you will find many more interesting features of the Mars software.

[mietkacda]

I don't have lcn in system settings
menu language, audio 1,2, subtitle language, etc

Everything is fine.
I also once thought that there was no LCN in the settings.
THE SYSTEM SETTINGS MENU HAS SEVERAL PAGES.There are 4 pages. Do you understand?There are 4 pages. They need to be scrolled through with the PG buttons.
I wrote "page down with the PG + - button" in that post. Or, as you correctly pointed out "System settings, ok, down arrow, you will enter the next page. There is the LCN."(Thanks MAVERIC!)
This will take you to the second settings page.
And if you read the topic completely, you will find many more interesting features of the Mars software.

thanks a lot now i found it

[4nonymous]

Does anyone use this with cable service? Mine does show all channels on the auto tuning process but afterwards does not show the locked channels on the list. Anyone has an idea on what is the problem?