Another poor Update for V8 UHD
Moderators: admin, GTMedia Team
Another poor Update for V8 UHD
Still v8 UHD has a signal strength problem. Cannot finding signals Manually by Hand moving..need Satfinder support its completely terrible?
Last edited by Biz86 on Sat Nov 26, 2022 2:41 am, edited 2 times in total.
Re: Another poor Update for V8 UHD
The signal strength and quality is only with values below normal, you can use to align a parabolic
Re: Another poor Update for V8 UHD
It didn't happen in the previous one.. I looked at the signal bar and to Catched the satellite manually. Not so in this version. The signal bar does not show working when connected to the dish. This is not the case with any satellite receiver. Even if I caught the signal on the dish before, I watched the signal strength manually.Check by connecting an LNB to a receiver with original firmware that has not been put on Mars and the signal strength bar should be indicated.
Re: Another poor Update for V8 UHD
If you know the satellite and the TP / Channel that works on that satellite, set the TV to that channel and turn up the volume so you here it when you are on sat.
I have even done this using two phones to work further away and still here through the phone call.
Owen
I have even done this using two phones to work further away and still here through the phone call.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Another poor Update for V8 UHD
Check the privet msg box ...
Re: Another poor Update for V8 UHD
Here is the image. After connect to mars include box... normaly LNB connecting to the box original signal intensity active its moving.. but in the mars not detecting and dont see any Movement
- Attachments
-
- IMG_20221121_122409_382.jpg (87.08 KiB) Viewed 1150 times
Re: Another poor Update for V8 UHD
With users who have both a V8UHD and V8X with (Mars) software, there is a big difference in signal / quality when used against the same dish etc.
Den
Den
Re: Another poor Update for V8 UHD
Salve il fatto della qualità del segnale non,è nella norma è più basso del software prima di MARS non supera i parametri 80 / 60/65 max .
Re: Another poor Update for V8 UHD
Someome trying to banned me so i used bad words here.. what i said.proof me...i dont know.. gtmedia administration are you happy now.. hello memebers they are blocked prople in this form without any concerned.. today i was blocked... i dont know the reason. Mention bad words.. ihad posted only post in this form.. i dont kow whats the Bad word to blocked here.. i think some one post any problems with mars tthey are trying to blocked peopels ????
Re: Another poor Update for V8 UHD
You have no warning, if in doubt please look at the rulesBiz86 wrote: ↑Fri Nov 25, 2022 1:43 amSomeome trying to banned me so i used bad words here.. what i said.proof me...i dont know.. gtmedia administration are you happy now.. hello memebers they are blocked prople in this form without any concerned.. today i was blocked... i dont know the reason. Mention bad words.. ihad posted only post in this form.. i dont kow whats the Bad word to blocked here.. i think some one post any problems with mars tthey are trying to blocked peopels ????
Re: Another poor Update for V8 UHD
Hello no, my account banned .. i dont know why.. my ip banned ,
Re: Another poor Update for V8 UHD
see the ss
- Attachments
-
- See?
- Screenshot_20221125-130637.png (129.56 KiB) Viewed 908 times
Last edited by Biz86 on Sat Nov 26, 2022 2:40 am, edited 2 times in total.
Re: Another poor Update for V8 UHD
If I was banned you couldn't write
Re: Another poor Update for V8 UHD
Im login using a vpn
Re: Another poor Update for V8 UHD
Looked at this.
Looks like a old ban on an already used IP (probably a spammer) that your VPN has used.
Owen
Looks like a old ban on an already used IP (probably a spammer) that your VPN has used.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Another poor Update for V8 UHD
Hi
Got time to test the signal thing while moving a dish.
Test method: V8X Mars software. Set to a channel on my motor C band dish, moved the dish using the manual remote for the motor.
Sometimes the signal was shown as first reported, that is no change was reported even though the signal had gone as shown by other boxes using the same dish.
Signal reporting worked both from Info button on channel and in antenna settings.
All later tests show expected normal level reports as the dish moves in and out of signal zone.
Thinking now: I had NO internet connected.
Will repeat this with net connected. As there has been and I have seen continued net use by the V8X, maybe that interrupts signal reporting.
Test with MARS UHD showed no lack of signal reporting on the same testing.
Biz86 try your signal response with the internet disconnected on the V8X.
Owen
Got time to test the signal thing while moving a dish.
Test method: V8X Mars software. Set to a channel on my motor C band dish, moved the dish using the manual remote for the motor.
Sometimes the signal was shown as first reported, that is no change was reported even though the signal had gone as shown by other boxes using the same dish.
Signal reporting worked both from Info button on channel and in antenna settings.
All later tests show expected normal level reports as the dish moves in and out of signal zone.
Thinking now: I had NO internet connected.
Will repeat this with net connected. As there has been and I have seen continued net use by the V8X, maybe that interrupts signal reporting.
Test with MARS UHD showed no lack of signal reporting on the same testing.
Biz86 try your signal response with the internet disconnected on the V8X.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Another poor Update for V8 UHD
This is the problem i telling.. but original version V8 UHD.. working same as hellobox... i get every sigmal manually moving by hand. But now i couldnt do caz signal strength bar not.moving in this firmware...
- Attachments
-
- Hellobox 8 after connecting to the lnb signal intensity working.
- IMG_20221127_084432_872~3.jpg (55.58 KiB) Viewed 715 times
-
- With V8 UHD try to catchup manually by Hand after connecting lnb yo device no signal indicating
- IMG_20221128_053212_898.jpg (90.66 KiB) Viewed 715 times
Re: Another poor Update for V8 UHD
You have listed a V8X that is incompatible when changing antenna parameters, there is no channel editor for the V8UHD
Re: Another poor Update for V8 UHD
Only thing to do now selling this and buy another one.. this is major issue know. I Cannot set my two another dishes in this reason.. need satfinder support to fix that two.
Re: Another poor Update for V8 UHD
A cheap tone type finder will help you a lot.
Owen
.
.
This one $8 on aliexpress.
Owen
.
.
This one $8 on aliexpress.
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.