Import and export
Moderators: admin, GTMedia Team
Import and export
How can I import or export keys with the mars update on my Uhd
Re: Import and export
To carry out the Import / Export is as follows.
Insert your USB, USB Ready comes to the screen, Menu / Move Curser to USB / OK / Then Press Yellow on the Remote (Upload), a small panel comes to the screen, move the curser to (Upload Key to USB) / OK / When complete / The file will look like (softcam_2023_06_07_1.key) / then Exit / Remove the USB, you can then view the information on your computer.
When you (Import) the information back into the receiver, you may have to rename the file to (Softcam).
With you using your own softcam, you may delete the softcam that was built into the receiver, so keep a copy of this on USB for reference.
Den
Insert your USB, USB Ready comes to the screen, Menu / Move Curser to USB / OK / Then Press Yellow on the Remote (Upload), a small panel comes to the screen, move the curser to (Upload Key to USB) / OK / When complete / The file will look like (softcam_2023_06_07_1.key) / then Exit / Remove the USB, you can then view the information on your computer.
When you (Import) the information back into the receiver, you may have to rename the file to (Softcam).
With you using your own softcam, you may delete the softcam that was built into the receiver, so keep a copy of this on USB for reference.
Den
Last edited by STRETCH on Thu Jun 08, 2023 8:22 am, edited 1 time in total.
Re: Import and export
Note: No need to rename to Softcam on Mars. You can import back with same file name exportedSTRETCH wrote: ↑Wed Jun 07, 2023 10:17 amTo carry out the Import / Export is as follows.
Insert your USB, USB Ready comes to the screen, Menu / Move Curser to USB / OK / Then Press Yellow on the Remote (Upload), a small panel comes to the screen, move the curser to (Upload Key to USB) / OK / When complete / The file will look like (softcam_2023_06_07_1.key) / then Exit / Remove the USB, you can then view the information on your computer.
When you (Import) the information back into the receiver, you will have to rename the file to (Softcam).
Den
Re: Import and export
Thanks will try it and see
Re: Import and export
Thanks for the info, i did not know this, was going by the old software, before Mars.
Den
Den