Witam .Po aktualizacji v8x oprogramowania MARS dekoder włącza się ale telewizor nie widzi dekodera poprzez HDMI.
Co zrobić?
Proszę o pomoc .
GTmedia v8x
Moderators: admin, GTMedia Team
Re: GTmedia v8x
It is possible that the installation of Mars has been incomplete, if the display works, try to recover it by means of an upgrade using the flash.bin or update.bin file.
-
- Posts: 11
- Joined: Thu May 21, 2020 3:14 pm
Re: GTmedia v8x
E seguido esos pasos pero me pone
usb update! Do not power off
Pero no hace nada ahí lo dejo todo el tiempo y ya está
Por favor podéis a consejarme
usb update! Do not power off
Pero no hace nada ahí lo dejo todo el tiempo y ya está
Por favor podéis a consejarme
Re: GTmedia v8x
Check that the file is correct and well renamed to flash.bin or update.bin if it is Mars, finally change USB if it still does not work
Re: GTmedia v8x
The V8X receiver has a (Scart) output, does your TV have a (scart) socket to check if you are getting a output from the receiver.
Den
Den
Re: GTmedia v8x
If you did upgrade to Mars, the USB flash.bin method does not work any more.
Mars recovery method is here.
Mars USB Forced Upgrade Guide.zip
When you power on, do you see the display say boot and then end with a channel number or ----?
Does pressing the remote button change this front panel display?
There is a button on the remote called TV Mode.
pressing that will change the box resolution so your TV can see the different resolutions.
Try that as the update may be using 1080i 50Hz and your TV can not.
As STRETCH said, also try the AV output as that is resolution free, but will be PAL so if your TV is NTSC only you will still not see it.
Owen
Mars recovery method is here.
Mars USB Forced Upgrade Guide.zip
When you power on, do you see the display say boot and then end with a channel number or ----?
Does pressing the remote button change this front panel display?
There is a button on the remote called TV Mode.
pressing that will change the box resolution so your TV can see the different resolutions.
Try that as the update may be using 1080i 50Hz and your TV can not.
As STRETCH said, also try the AV output as that is resolution free, but will be PAL so if your TV is NTSC only you will still not see it.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 11
- Joined: Thu May 21, 2020 3:14 pm
Re: GTmedia v8x
Hola ,os subo una foto para ver si lo podemos arreglar esto es lo que le pasa cuando carga el firm renombrado y probado de las 2 formas update y no me acuerdo ahora de la otra ya os la pondré
Bueno pongo foto
https://i.postimg.cc/Rhv2JjF9/IMG-20230612-193117.jpg
Esto me paso por poner el firm de Mars en DB usuario,un gran fallo
Bueno pongo foto
https://i.postimg.cc/Rhv2JjF9/IMG-20230612-193117.jpg
Esto me paso por poner el firm de Mars en DB usuario,un gran fallo
Re: GTmedia v8x
Es update.bin y flash.binpepe garcia wrote: ↑Sat Aug 12, 2023 7:03 amHola ,os subo una foto para ver si lo podemos arreglar esto es lo que le pasa cuando carga el firm renombrado y probado de las 2 formas update y no me acuerdo ahora de la otra ya os la pondré
Bueno pongo foto
https://i.postimg.cc/Rhv2JjF9/IMG-20230612-193117.jpg
Esto me paso por poner el firm de Mars en DB usuario,un gran fallo
Pon las dos update con una versión de Mars y flash con un firmware normal, piensa que deberás probar con varias versiones, si no tarda 90 segundos en reiniciar debes cambiar la versión de esos archivos para que el UPG sea efectivo