GTmedia v8x

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
Scur321
Posts: 1
Joined: Thu Mar 05, 2020 3:35 pm

GTmedia v8x

Post by Scur321 »

Witam .Po aktualizacji v8x oprogramowania MARS dekoder włącza się ale telewizor nie widzi dekodera poprzez HDMI.
Co zrobić?
Proszę o pomoc .

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GTmedia v8x

Post by CAJE »

It is possible that the installation of Mars has been incomplete, if the display works, try to recover it by means of an upgrade using the flash.bin or update.bin file.

pepe garcia
Posts: 11
Joined: Thu May 21, 2020 3:14 pm

Re: GTmedia v8x

Post by pepe garcia »

E seguido esos pasos pero me pone
usb update! Do not power off
Pero no hace nada ahí lo dejo todo el tiempo y ya está
Por favor podéis a consejarme 🙂

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GTmedia v8x

Post by CAJE »

Check that the file is correct and well renamed to flash.bin or update.bin if it is Mars, finally change USB if it still does not work

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: GTmedia v8x

Post by STRETCH »

The V8X receiver has a (Scart) output, does your TV have a (scart) socket to check if you are getting a output from the receiver.

Den

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GTmedia v8x

Post by Feralkiwi »

If you did upgrade to Mars, the USB flash.bin method does not work any more.

Mars recovery method is here.
Mars USB Forced Upgrade Guide.zip

When you power on, do you see the display say boot and then end with a channel number or ----?
Does pressing the remote button change this front panel display?

There is a button on the remote called TV Mode.
pressing that will change the box resolution so your TV can see the different resolutions.
Try that as the update may be using 1080i 50Hz and your TV can not.

As STRETCH said, also try the AV output as that is resolution free, but will be PAL so if your TV is NTSC only you will still not see it.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

pepe garcia
Posts: 11
Joined: Thu May 21, 2020 3:14 pm

Re: GTmedia v8x

Post by pepe garcia »

Hola ,os subo una foto para ver si lo podemos arreglar esto es lo que le pasa cuando carga el firm renombrado y probado de las 2 formas update y no me acuerdo ahora de la otra ya os la pondré
Bueno pongo foto
https://i.postimg.cc/Rhv2JjF9/IMG-20230612-193117.jpg
Esto me paso por poner el firm de Mars en DB usuario,un gran fallo

User avatar
CAJE
网站管理员
Posts: 2262
Joined: Sun Dec 06, 2020 8:00 pm

Re: GTmedia v8x

Post by CAJE »

pepe garcia wrote:
Sat Aug 12, 2023 7:03 am
Hola ,os subo una foto para ver si lo podemos arreglar esto es lo que le pasa cuando carga el firm renombrado y probado de las 2 formas update y no me acuerdo ahora de la otra ya os la pondré
Bueno pongo foto
https://i.postimg.cc/Rhv2JjF9/IMG-20230612-193117.jpg
Esto me paso por poner el firm de Mars en DB usuario,un gran fallo
Es update.bin y flash.bin
Pon las dos update con una versión de Mars y flash con un firmware normal, piensa que deberás probar con varias versiones, si no tarda 90 segundos en reiniciar debes cambiar la versión de esos archivos para que el UPG sea efectivo

Post Reply

Return to “GTMEDIA V8 SERIES”