Page 1 of 1

Ziwell 15K

Posted: Wed Dec 19, 2018 5:13 pm
by antrabe
Somebody use zinwell lnb 15k how it works?

thanks

Re: Ziwell 15K

Posted: Wed Dec 19, 2018 6:49 pm
by Feralkiwi
Some of those multi sat LNB's use the 22kHz to switch from one sat to the other.

If it is a 3 or 4 sat multi then try the DiSEqC 1.0 settings.
Others with twin outputs have one port for H and one for V.
Universal LNB's also use 22kHz to switch between the low band Ku and high band Ku.

Explain more what your LNB is.

Owen

Re: Ziwell 15K

Posted: Wed Dec 19, 2018 9:43 pm
by antrabe
Im using the lnb zinwell 15K and works fine but not receive the complete sat for example on sat 40.6W i can receive 194 channels and 160 on 55.5W i have some freguencies that i cant receive i was thinking to buy the titanium C1 PLL that i read on boards that is the best lnb for c band.
I have a 1.8m dish from the south of spain.

Re: Ziwell 15K

Posted: Wed Dec 19, 2018 9:46 pm
by antrabe
Somebody could help me to clear the sky on 40.5W i only need the emms.

thanks

Re: Ziwell 15K

Posted: Thu Dec 20, 2018 2:40 pm
by cpr43
antrabe wrote:Somebody could help me to clear the sky on 40.5W i only need the emms.

thanks
Hello and Welcome

https://www.freesat.cc/forum/viewtopic.php?f=47&t=10263

Later , ask for keys here:
https://www.freesat.cc/forum/viewtopic.php?f=32&t=10267

Re: Ziwell 15K

Posted: Thu Dec 27, 2018 3:34 pm
by antrabe
Hi all thanks for this good board and your support