Page 1 of 1

Multiple Disk connected to mutliple boxes

Posted: Sun Dec 30, 2018 12:45 am
by bajackson1
I have looked at using Uncommitted" DiSEqC 1.1 switch's in the past but the problem I had was the Freq range of 950 - 2300 MHz and for DISH, while that worked great for the Ku side does it not limit the C-Band side?

Re: Multiple Disk connected to mutliple boxes

Posted: Sun Dec 30, 2018 9:20 am
by Feralkiwi
All LNB's use the same frequency, 950-2300, both ku and c band, so DiSEqC switches work fine with both.

Owen

Re: Multiple Disk connected to mutliple boxes

Posted: Mon Dec 31, 2018 4:41 am
by bajackson1
Thank you Owen, I guess I will give it a shot then and give some feed back on what I achieved.

Brian

Re: Multiple Disk connected to mutliple boxes

Posted: Sat Jan 12, 2019 10:23 pm
by TWSat
How did it go?

Re: Multiple Disk connected to mutliple boxes

Posted: Sun Feb 03, 2019 1:26 am
by carlosiqm
Voy a probar un diseq para banda c y Ku, publicaré el resultado cuando los conecte

Re: Multiple Disk connected to mutliple boxes

Posted: Mon Feb 04, 2019 9:18 am
by Munyaga
bajackson1 wrote:I have looked at using Uncommitted" DiSEqC 1.1 switch's in the past but the problem I had was the Freq range of 950 - 2300 MHz and for DISH, while that worked great for the Ku side does it not limit the C-Band side?
I use a similar switch and it works on C band too.

Re: Multiple Disk connected to mutliple boxes

Posted: Sun Feb 24, 2019 7:17 pm
by Falcon4072
Munyaga wrote:
bajackson1 wrote:I have looked at using Uncommitted" DiSEqC 1.1 switch's in the past but the problem I had was the Freq range of 950 - 2300 MHz and for DISH, while that worked great for the Ku side does it not limit the C-Band side?
I use a similar switch and it works on C band too.
I also use one and it works best in ku band.

Re: Multiple Disk connected to mutliple boxes

Posted: Mon Feb 25, 2019 8:26 am
by Munyaga
Falcon4072 wrote:
Munyaga wrote:
bajackson1 wrote:I have looked at using Uncommitted" DiSEqC 1.1 switch's in the past but the problem I had was the Freq range of 950 - 2300 MHz and for DISH, while that worked great for the Ku side does it not limit the C-Band side?
I use a similar switch and it works on C band too.
I also use one and it works best in ku band.
Actually mine has both C and Ku band.

Re: Multiple Disk connected to mutliple boxes

Posted: Sun Apr 14, 2019 1:30 am
by chartab
My diseq works with ku and c band.