Some TP name are weird

for the power, AV cable,HDMI cable....

Moderators: admin, GTMedia Team

Post Reply
cdaw
Posts: 31
Joined: Sun Dec 15, 2019 11:42 am

Some TP name are weird

Post by cdaw »

At101w, 3900 /30000 H, my channel name are Ch1,Ch3,.....Ch25.Ch26. All the other TP are good and all name are right.
Also, At 103W,4180/30000V, channel name are Ch1 Ch2.... Ch11, also I get all the other TP and name are same as lyngsat shows. Just wan to know everybody else get the same thing?
Thanks

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Some TP name are weird

Post by Feralkiwi »

This happens if your signal is weak.
The numbers are the SID for each channel.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

cdaw
Posts: 31
Joined: Sun Dec 15, 2019 11:42 am

Re: Some TP name are weird

Post by cdaw »

I just make 101W 3900/30000V signal quality 67-70%, intensity is 60%. Same lik all the other channel. Re scanned, still the same. I am assuming those channel aren’t existing anymore?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Some TP name are weird

Post by Feralkiwi »

Try to adjust your dish if you know how to get a bit more signal strength.
The Service ID is the number of the channels transmission stream.
These are shown instead of the channels name with low signal.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

cdaw
Posts: 31
Joined: Sun Dec 15, 2019 11:42 am

Re: Some TP name are weird

Post by cdaw »

I will try again, I did adjusted from 56% to 65%. It’s very hard for me. Not sure if I can do this

User avatar
juan_vale
网站管理员
Posts: 874
Joined: Wed Nov 29, 2017 5:50 am
Location: B.C.S. Mexico 24N 110W

Re: Some TP name are weird

Post by juan_vale »

cdaw wrote:
Fri May 08, 2020 2:05 am
At101w, 3900 /30000 H, my channel name are Ch1,Ch3,.....Ch25.Ch26. All the other TP are good and all name are right.
Also, At 103W,4180/30000V, channel name are Ch1 Ch2.... Ch11, also I get all the other TP and name are same as lyngsat shows. Just wan to know everybody else get the same thing?
Thanks
When you scan in a TP and get a load of CH1, CH2's it normally is because the programming on that TP is scrambled with a system that your STB cannot decipher and the provider of those channels does not provide a channel name visible on the satellite. Both of the TPs you mention are Digicipher encryption, which the GTMedia boxes cannot handle. Best to delete those TPs from your list as they are just taking up memory space and you will never use them.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)

cdaw
Posts: 31
Joined: Sun Dec 15, 2019 11:42 am

Re: Some TP name are weird

Post by cdaw »

Thank you so much for before and. Now . Juan. I don’t have to adjust again anymore
M

Post Reply

Return to “Accessories”