New Box

Talking about new market news, idea for life

Moderators: admin, GTMedia Team

Post Reply
dl76
Posts: 4
Joined: Mon Nov 06, 2017 5:14 pm

New Box

Post by dl76 »

Hopefully i post this in correct section. If not mod or admin please move.
So i just got my 12 foot c band back up last weekend . Looking for a new and latest receiver. I really dont need android on the receiver. Just looking for a decent receiver to run 43.1 west to 135 west on the c band arc. There are so many models of GT Media, really not sure which is the latest without Android on it. Any suggestions are welcome. Thank you for your time. :ugeek:

STRETCH
Posts: 2811
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: New Box

Post by STRETCH »

Check out the V8X receiver, which will meet your needs.
Has been out a while now, has got lots of support.

Den

Marantz
Posts: 279
Joined: Thu Dec 28, 2017 5:36 pm

Re: New Box

Post by Marantz »

V8X hard to beat for the money ,i been at it since 1987 ,and tried/tested a ton of them over the years ,if you are just getting back into it after a while , don't forget about the feed-horn and lnb ,titanium lnbf's not bad for the money either

dl76
Posts: 4
Joined: Mon Nov 06, 2017 5:14 pm

Re: New Box

Post by dl76 »

Marantz wrote:
Thu Jun 16, 2022 4:28 pm
V8X hard to beat for the money ,i been at it since 1987 ,and tried/tested a ton of them over the years ,if you are just getting back into it after a while , don't forget about the feed-horn and lnb ,titanium lnbf's not bad for the money either
Thanks for the info. Already have the Titanium ASCII, a new Titanium 5g interference lnb and picked up a new Venture 36 inch ball and screw Actuator. Looks like V8X it is. Thank y'all.

User avatar
iq180
网站管理员
Posts: 1291
Joined: Thu Aug 11, 2016 2:55 pm

Re: New Box

Post by iq180 »

dl76 wrote:
Thu Jun 16, 2022 4:34 pm
Marantz wrote:
Thu Jun 16, 2022 4:28 pm
V8X hard to beat for the money ,i been at it since 1987 ,and tried/tested a ton of them over the years ,if you are just getting back into it after a while , don't forget about the feed-horn and lnb ,titanium lnbf's not bad for the money either
Thanks for the info. Already have the Titanium ASCII, a new Titanium 5g interference lnb and picked up a new Venture 36 inch ball and screw Actuator. Looks like V8X it is. Thank y'all.
The V8-X is a good receiver but it has micro freezing on sat 43.1w/55.5w/and 58.0w that has never been fixed, on the other hand the V8-UHD has been fixed and no longer has that problem, just a heads up on the V8-X problem.

dl76
Posts: 4
Joined: Mon Nov 06, 2017 5:14 pm

Re: New Box

Post by dl76 »

iq180 wrote:
Fri Jun 17, 2022 12:17 am
dl76 wrote:
Thu Jun 16, 2022 4:34 pm
Marantz wrote:
Thu Jun 16, 2022 4:28 pm
V8X hard to beat for the money ,i been at it since 1987 ,and tried/tested a ton of them over the years ,if you are just getting back into it after a while , don't forget about the feed-horn and lnb ,titanium lnbf's not bad for the money either
Thanks for the info. Already have the Titanium ASCII, a new Titanium 5g interference lnb and picked up a new Venture 36 inch ball and screw Actuator. Looks like V8X it is. Thank y'all.
The V8-X is a good receiver but it has micro freezing on sat 43.1w/55.5w/and 58.0w that has never been fixed, on the other hand the V8-UHD has been fixed and no longer has that problem, just a heads up on the V8-X problem.

Thank you for the reply, have a great evening.

sathunter
Posts: 95
Joined: Thu Aug 17, 2017 1:37 am

Re: New Box

Post by sathunter »

Hi iq180 is the v8x still getting micro freezing on the v8x reeiver?

lme
Posts: 249
Joined: Sat Apr 29, 2017 2:10 am

Re: New Box

Post by lme »

dl76 wrote:
Thu Jun 16, 2022 3:04 am
Hopefully i post this in correct section. If not mod or admin please move.
So i just got my 12 foot c band back up last weekend . Looking for a new and latest receiver. I really dont need android on the receiver. Just looking for a decent receiver to run 43.1 west to 135 west on the c band arc. There are so many models of GT Media, really not sure which is the latest without Android on it. Any suggestions are welcome. Thank you for your time. :ugeek:
All GT media boxes have a short keys update life. After that you must buy the newest box on the market to get updated keys
embeded into the bin files. For that reason i suggest to look for an enigma2 type box witch with the updated software will autoroll the keys for you.
Nihil sine Deo!

Marantz
Posts: 279
Joined: Thu Dec 28, 2017 5:36 pm

Re: New Box

Post by Marantz »

Hi IME

My v8x is still working here in N.A. just fine with the old software .

135 w to 87w are ok for me but i am blocked further to the east

I don't want to move over to MARS yet because it seems like people are having issues

Could you PM me sometime ,i have a question or two

Thank you

User avatar
cpr43
网站管理员
Posts: 6532
Joined: Thu Aug 11, 2016 1:41 pm

Re: New Box

Post by cpr43 »

lme wrote:
Wed Nov 09, 2022 9:31 pm
dl76 wrote:
Thu Jun 16, 2022 3:04 am
Hopefully i post this in correct section. If not mod or admin please move.
So i just got my 12 foot c band back up last weekend . Looking for a new and latest receiver. I really dont need android on the receiver. Just looking for a decent receiver to run 43.1 west to 135 west on the c band arc. There are so many models of GT Media, really not sure which is the latest without Android on it. Any suggestions are welcome. Thank you for your time. :ugeek:
All GT media boxes have a short keys update life. After that you must buy the newest box on the market to get updated keys
embeded into the bin files. For that reason i suggest to look for an enigma2 type box witch with the updated software will autoroll the keys for you.
Enigma2 still needs to enter keys to Oscam /Softcam when EMM AU expires. Also TP that does not autoroll in long time requires to enter the 00/01 ECMs. Auto Biss will require Oscam modification to add plugins which are mainly developed for Europe region. Advantage is that you can do all this from you computer ( if you have the knowledge) while GTmedia and close sources boxes need to wait for bin updates from manufacturer.
ImageImage

Marantz
Posts: 279
Joined: Thu Dec 28, 2017 5:36 pm

Re: New Box

Post by Marantz »

i hope Gt Media will continue to provide future updates to the V8X without forcing you over to MARS in order to get the embedded updated softcam / bin /codes /emm

lme
Posts: 249
Joined: Sat Apr 29, 2017 2:10 am

Re: New Box

Post by lme »

cpr43 wrote:
Thu Nov 10, 2022 4:38 pm
lme wrote:
Wed Nov 09, 2022 9:31 pm
dl76 wrote:
Thu Jun 16, 2022 3:04 am
Hopefully i post this in correct section. If not mod or admin please move.
So i just got my 12 foot c band back up last weekend . Looking for a new and latest receiver. I really dont need android on the receiver. Just looking for a decent receiver to run 43.1 west to 135 west on the c band arc. There are so many models of GT Media, really not sure which is the latest without Android on it. Any suggestions are welcome. Thank you for your time. :ugeek:
All GT media boxes have a short keys update life. After that you must buy the newest box on the market to get updated keys
embeded into the bin files. For that reason i suggest to look for an enigma2 type box witch with the updated software will autoroll the keys for you.
Enigma2 still needs to enter keys to Oscam /Softcam when EMM AU expires. Also TP that does not autoroll in long time requires to enter the 00/01 ECMs. Auto Biss will require Oscam modification to add plugins which are mainly developed for Europe region. Advantage is that you can do all this from you computer ( if you have the knowledge) while GTmedia and close sources boxes need to wait for bin updates from manufacturer.
You know very well cpr43, how to get the new EMM key using the pvhe program (except for A F N). beside, the EMM keys are posted all over the web. When you have a V7max box like me, nobody will give you keys on this forum, but you are asked to give them the EMM keys so that can be incorporated into the bins for the new box only. After few years no more updates = no more keys... solution: buy a new box!
Nihil sine Deo!

User avatar
cpr43
网站管理员
Posts: 6532
Joined: Thu Aug 11, 2016 1:41 pm

Re: New Box

Post by cpr43 »

You can still do the same. Once you find new keys either here or in the internet all you have to do is incorporated them to your softcam (which should be keep updated by you) same as E2. We can also still help if members with old models ask for help for new keys or updated softcam, only by request
ImageImage

Post Reply