Firmware @ GT MEDIA Audio D2 DAB+
Posted: Tue Jul 09, 2019 5:39 pm
Unfortunately I must to post here, because in the forum "GTMEDIA AUDIO Series (DAB+ & FM)" is post function not possible ...
I have the GTMEDIA D2 DAB+ Radio. Firmware installed on the device:
D2-190423a, DAB SDK v0.5.8.r9867
I have seen that there is a newer firmware here in the forum.
But update doesn't work as described in this post:
viewtopic.php?f=66&t=13875
It doesn't work that way. USB connected and press menu at the same time does not matter.
Then I tested different possibilities ...
1st attempt: Power Off --> USB connected --> Hold Menu button --> Power On: The display shows the channel list. On the PC I hear the USB Plugin/Plugout Sound in an endless second cycle. No drive visible.
2nd attempt: Power Off --> USB connected --> Hold FUNC button --> Power On: The display shows "F/W Upgrade Mode". On the PC I hear the USB Plugin/Plugout Sound in an endless second cycle. No drive visible.
I habe tested it on 3 different PC with Window 10 v1903 64 bit. On all PC the same problem ...
What is the problem???
How does the firmware update now work correctly on this device?
Is it possible to update the firmware via TF card?
I have the GTMEDIA D2 DAB+ Radio. Firmware installed on the device:
D2-190423a, DAB SDK v0.5.8.r9867
I have seen that there is a newer firmware here in the forum.
But update doesn't work as described in this post:
viewtopic.php?f=66&t=13875
It doesn't work that way. USB connected and press menu at the same time does not matter.
Then I tested different possibilities ...
1st attempt: Power Off --> USB connected --> Hold Menu button --> Power On: The display shows the channel list. On the PC I hear the USB Plugin/Plugout Sound in an endless second cycle. No drive visible.
2nd attempt: Power Off --> USB connected --> Hold FUNC button --> Power On: The display shows "F/W Upgrade Mode". On the PC I hear the USB Plugin/Plugout Sound in an endless second cycle. No drive visible.
I habe tested it on 3 different PC with Window 10 v1903 64 bit. On all PC the same problem ...
What is the problem???
How does the firmware update now work correctly on this device?
Is it possible to update the firmware via TF card?