Severe Problems with C-Band LNB and 5G signals Fixed

Talking about new market news, idea for life

Moderators: admin, GTMedia Team

Post Reply
bellesdad
Posts: 74
Joined: Fri Sep 29, 2017 1:08 am
Location: Australia

Severe Problems with C-Band LNB and 5G signals Fixed

Post by bellesdad »

Severe Problems with C-Band LNB and 5G signals Fixed
About 5 houses from my home a 3G and 4G Tower was reconfigured to also have 5G Last and this year
I have Installed Satellite dishes since 1985 first in the USA then I moved to Australia have put in many C-Band and Ku-Band antennas until 6 years ago when I lost a right foot below the knee. Can walk now but can't climb ladders but for myself I still do things slower.

I live south of Brisbane Australia about 15 miles and had a 2.3 meter mesh dish with a Zinwell C-band LNB which worked on Intelsat I-19 166E good but since they started 5G test and now regular transmissions I lost many transponders. So while looking why I found out that some had good signal using a SatKing C-BAND 5G FILTER LNBF model SKU-3103. I don't sell these this only a report on how it worked.

So after buying this new LNBF I was not happy with how the LNBF fitted into the LNB holder so it would not fit into the Zinwell C-Band LNBF holder so I gently enlarged the old holder so the fit was snug and easier to adjust. I aimed with a meter and got a much stronger signal than the Zinwell. Hooked up to the reciever and got all on I-19 166E Even NZTV which can now be recieved with a Biss reciever. And FTA pictures are clear and sharp and because of Covid19 Phillapine canels are free now and all sharp pictures.

I hope this post help fellow members for 5G is going all over the world and I see that there are problems with the older LNB's that must of let in side signals.
Now my next project is fitting one of these To my 10 foot dish used for Circular Polarisation which I have used a Zinwell C-Band LNB and lost signals on NSS9 and another satalitte(don't worry I know I can't spell.
Attachments
20200514_091144.jpg
20200514_091144.jpg (995.88 KiB) Viewed 1665 times
20200514_091120.jpg
20200514_091120.jpg (919.71 KiB) Viewed 1665 times
20200514_090928.jpg
20200514_090928.jpg (1.7 MiB) Viewed 1665 times

User avatar
Feralkiwi
网站管理员
Posts: 8376
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Severe Problems with C-Band LNB and 5G signals Fixed

Post by Feralkiwi »

I have always found that a new LNB works better than the old one.
After about 6 months the new one will fade on some TP's.
I think this is aging or heat damage to the LNB, or in my case passably damage from the electric fence ground currents.

Check back on this in six months.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

bellesdad
Posts: 74
Joined: Fri Sep 29, 2017 1:08 am
Location: Australia

Re: Severe Problems with C-Band LNB and 5G signals Fixed

Post by bellesdad »

Owen the "Old c-band LNBF" is 2 months old and didn't work any better than my older ones but will give a report bellesdad

ftass
Posts: 16
Joined: Mon May 20, 2019 8:18 am

Re: Severe Problems with C-Band LNB and 5G signals Fixed

Post by ftass »

I have had good results using the Satking 5G filter LNBF even when under a phone tower!
Previously used the Titanium filtered LNBF but not good with 5G interference.

Post Reply

Return to “Others”