Hi one question about 101w
if I go to 101w satellite tp 4030v coming with 65% signal and some tp with 72% but 3820h and 4050v are 0% signal and if I move dish 8 clicks to east 3820 and 4050v coming with 70% but then no signal on 4030v and 4080v signal 0% anybody know solution to get all from one position.Thanks
question for dish setup
Moderators: admin, GTMedia Team
Re: question for dish setup
Have a look at "dish pointer" just to confirm that you have set everything up correct.
It could be that the "skew" is not set correct, dish pointer should be able to confirm this, ie when you are in front of the lnb looking at the dish, you may have to move the lnb very little with the twist of the hand clock wise / anti clock wise.
Just noticed that it is "c" band. which may have a different way to solve this.
Good luck
Den
It could be that the "skew" is not set correct, dish pointer should be able to confirm this, ie when you are in front of the lnb looking at the dish, you may have to move the lnb very little with the twist of the hand clock wise / anti clock wise.
Just noticed that it is "c" band. which may have a different way to solve this.
Good luck
Den
Re: question for dish setup
Dish declinationzeljo wrote: ↑Fri Jun 26, 2020 6:56 pmHi one question about 101w
if I go to 101w satellite tp 4030v coming with 65% signal and some tp with 72% but 3820h and 4050v are 0% signal and if I move dish 8 clicks to east 3820 and 4050v coming with 70% but then no signal on 4030v and 4080v signal 0% anybody know solution to get all from one position.Thanks
Re: question for dish setup
The best way for me to setup a dish is to find true south, I like to start with my true south satellite, so if your location is 35 North and 78 West, your true south satellite would be 78.0w, then I find the next satellite east then I go back to 78.0w and then find the next one to the west, every time you make changes go back to each satellite and check to see if it's better on not, it takes time.
BTW, a good start is with dishpointer.com and a laptop with wifi, it's a big help.
BTW, a good start is with dishpointer.com and a laptop with wifi, it's a big help.
Re: question for dish setup
I would guess your LNB is not pointing at the center of the antenna, it is pointing slightly to one side. With the new digital LNBs it is easy to misalign where it is pointing, also difficult to get at.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: question for dish setup
thanks everybody for reply.