Hallo,
Ich bin neu hier. Ich habe einen Gtcombo. Seit letzten update lassen sich die Kanele nicht mehr umschalten. Es erscheint bei der Kanaländerung auf der linken Seite die Menuleiste. Diese lässt sich nicht mehr entfernen.
Man muss zurück auf die Hometaste und dan wieder zum tv Programm. Es lässt sich auch nicht zwischen Dvb-s und dvb-c umschalten.
Was kann ich hier tun?
Danke
Roland
Probleme seit letzten update
Moderators: admin, GTMedia Team
Re: Probleme seit letzten update
Make sure that your batteries are fully charged / or just replace them.
Den
Den
Re: Probleme seit letzten update
Hi
The Problem is not the remote control. The batterie are new.
Wen i switch the program, the Side menu goes automatic on and i can't go out with exit. Only with the Home Button.
Roland
The Problem is not the remote control. The batterie are new.
Wen i switch the program, the Side menu goes automatic on and i can't go out with exit. Only with the Home Button.
Roland
Re: Probleme seit letzten update
Most user have found this is due to low batteries.
Try another set and maybe use the remote closer to the unit so the Bluetooth can reach.
Also there may be other things running Bluetooth that block the remote.
You could also try unpairing the remote and then use it as a standard IR remote.
Note after unpairing the remote you need to reboot the box.
Owen
Try another set and maybe use the remote closer to the unit so the Bluetooth can reach.
Also there may be other things running Bluetooth that block the remote.
You could also try unpairing the remote and then use it as a standard IR remote.
Note after unpairing the remote you need to reboot the box.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Probleme seit letzten update
Hi,
Know it works.
Thank you.
Roland
Know it works.
Thank you.
Roland