Hi GT engineers,
I JUST received this new android dvbs GTcombo iwas expecting more from this device according to the specification and devices capabilities as per advertise
But unfortunatley i was frusterated when i deal with it
With alot of errors that has happened
And these are my initial evaluation
1- during blind scan for satellite sometimes it stucks and scan not progressing unless unplug coaxial cable????!!!
2- some TPS not seen by the device during search even if added manually there is good signal but channels (working normally on other devices with same dish and LNB)
3- device frequently freezes when changing channels from channel menu???
4- motor system specially ( USALS) DIfficult to deal with
Why i have to adjust each satellite with my coardinates??!
Like other receivers i add it once in intial usals setting then once
I choose usals setup in this satellite it should automatically detetect my default setting
5-OSD menu and setting is very poor
6- regarding video quality in some channels it is very poor compared to other receivers i have already
7- feeds and channels 422 only working with the alternative videoplayer after switching from yellow buttom
This player is very slow while on the other hand mxplayer is much better quality i tried it for recorder PVR It is much better
So if u can change or update this player
8- in case the channel biss encrypted will not opened by autobiss
There is no option to add it manually!!!! Very cheap devices has this capability!!!!
9-regarging the oscam!! Who can i add my servers to this oscam
I hope if there is soon update to solve this issues
And to answer my questions
Thank you
New Gtcombo problems needs Solution
Moderators: admin, nzl229, GTMedia Team
Re: New Gtcombo problems needs Solution
Thank you,
You just explained exactly why I dealt with this GTcmb.
The 4:2:2 channels opening in an external player doesn't even allow you to watch the content correctly.
Let's wait for an update, otherwise we would had lost the money in vane.
You just explained exactly why I dealt with this GTcmb.
The 4:2:2 channels opening in an external player doesn't even allow you to watch the content correctly.
Let's wait for an update, otherwise we would had lost the money in vane.
Re: New Gtcombo problems needs Solution
Really i was disappointed
I regret buying this device
Not using it anymore
Re: New Gtcombo problems needs Solution
I'm disappointed of this receiver, big problem is change language. After setup programs and change language for me on its the czech language and next day are some one of them again in default setting (eng, hun and etc)
Re: New Gtcombo problems needs Solution
You just explained what I was going to say. I reciebed it few days ago and Im so disappointed of this reciever so its called combo. Too many issues in this box. I thought this one will be much better than GTC box but no its worse. I removed combo box and re opened my GTC box at least much better than combo box. Hopefully they release much better firmware for GT combo
Re: New Gtcombo problems needs Solution
Please be patient. Most of the reported bugs are being working out. GTMedia is working hard to fix all of them. New released FW will be out short.
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: New Gtcombo problems needs Solution
Hi all!
I used the GT combo box to reproduce a movie with HEVC 10 bits codec, and it worked just fine used VLC.
Although I was able to see the movie with no problems, the box rebooted at the moment I connected the HDD disk.
I hope Gt media team and fixed in the future.
regards,
Johan
I used the GT combo box to reproduce a movie with HEVC 10 bits codec, and it worked just fine used VLC.
Although I was able to see the movie with no problems, the box rebooted at the moment I connected the HDD disk.
I hope Gt media team and fixed in the future.
regards,
Johan