While sharing information with another user, i was asked about the radio channels on the said satellite.
Using the V8 Turbo, i scanned in the said channels as per (flysat), eleven channels were found.
When you go from a TV channel to a RADIO channel, you get on the screen, GTMedia also Encrypted Program in the Back Ground.
The sound of the channel come through all OK.
RADIO 5 LIVE
RADIO 5 LIVE SPORTS EXTRA
BBC 6 MUSIC
BBC 4 EXTRA
BBC 1 EXTRA
BBC ASIAN NETWORK
BBC WORLD SERVICE
BBC RADIO 1
BBC RADIO 2
BBC RADIO 3
BBC RADIO 4
Should work with other GTMedia models V7Pro / V8UHD / V8X / V8 NOVA ORANGE.
Den
RADIO CHANNELS 27.5W BBC SAT BACK
Moderators: admin, GTMedia Team
Re: RADIO CHANNELS 27.5W BBC SAT BACK
hello stretch
the radio is free, but the v8turbo shows the encrypted flag, yes or no?
the radio is free, but the v8turbo shows the encrypted flag, yes or no?
Re: RADIO CHANNELS 27.5W BBC SAT BACK
@Tom.w
The said receiver does show the encrypted flag in the db file.
Den
The said receiver does show the encrypted flag in the db file.
Den
Re: RADIO CHANNELS 27.5W BBC SAT BACK
can you send the db file to me,i will check it
Best Regards
Best Regards
Re: RADIO CHANNELS 27.5W BBC SAT BACK
@ Tom
e-mail sent
Den
e-mail sent
Den
Re: RADIO CHANNELS 27.5W BBC SAT BACK
A update on my first post.
On checking with the db editor, i found that the radio channels did not have the TV flag set, which would be correct for the radio channels.
Setting the db editor to TV and RADIO, i then set about amending the TV flag to (1) against the radio channels. Just to find out what would happen.
With this information, i put this back into the V8Turbo (which i am using for this trial).
Results as follows, (radio) channels are at the end of the (tv) list.
When you select a radio channel, the sound comes in direct, but you get a (Black ) screen.
This should work with other receivers.
Have tried it with the following receivers V7Pro / V8X / V8 NOVA ORANGE, all worked as above.
With the V8UHD, just scan in the radio channels, when you go to the said channels, you will get the GTMedia logo in the back ground, with the info bar at the bottom of the screen, sound comes through at once.
Den
On checking with the db editor, i found that the radio channels did not have the TV flag set, which would be correct for the radio channels.
Setting the db editor to TV and RADIO, i then set about amending the TV flag to (1) against the radio channels. Just to find out what would happen.
With this information, i put this back into the V8Turbo (which i am using for this trial).
Results as follows, (radio) channels are at the end of the (tv) list.
When you select a radio channel, the sound comes in direct, but you get a (Black ) screen.
This should work with other receivers.
Have tried it with the following receivers V7Pro / V8X / V8 NOVA ORANGE, all worked as above.
With the V8UHD, just scan in the radio channels, when you go to the said channels, you will get the GTMedia logo in the back ground, with the info bar at the bottom of the screen, sound comes through at once.
Den