v7s2x扫88Ku 11G频道名称不正确

GTMedia产品没有在国内销售,欢迎GTMedia朋友讨论交流。外语版块不允许有中文回复.

Moderator: admin

Post Reply
Microka
Posts: 1
Joined: Tue Aug 23, 2022 5:24 am

v7s2x扫88Ku 11G频道名称不正确

Post by Microka »

v7 s2x,手动输入88Ku 11G两个转发器的PLS码,扫出来的频道名称不正确,有的为空,请问如何解决?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v7s2x扫88Ku 11G频道名称不正确

Post by Feralkiwi »

If the channel names scanned in as like CH-0023, CH-0024, this is due to weak signal.
If the unit can not see the data fully it will use the channels SID number as a channel name.
Check you have a good connection and dish aligned correctly.
Also if you used "Auto" scan, try Blind as the LNB frequency may be a few MHz off, as LNB's do as they get old.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

sanei
Posts: 2
Joined: Tue Oct 04, 2022 3:08 pm

Re: v7s2x扫88Ku 11G频道名称不正确

Post by sanei »

他家的繁體中文字庫缺字,正常啦。。。

編輯成簡中就能顯示正常

這個BUG一直不解決。。。

dupuffie
Posts: 4
Joined: Fri Dec 29, 2023 6:06 pm

Re: v7s2x扫88Ku 11G频道名称不正确

Post by dupuffie »

sanei wrote:
Tue Oct 04, 2022 3:12 pm
他家的繁體中文字庫缺字,正常啦。。。

編輯成簡中就能顯示正常

這個BUG一直不解決。。。
怎么编辑 可以直接用遥控器打中文吗

Post Reply

Return to “中国”