Page 1 of 1
GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Tue Mar 17, 2020 11:38 pm
by qquchn
怎么手动输入呢？除了通过U盘导入Key之外
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Wed Mar 18, 2020 11:06 pm
by Feralkiwi
If you start from the BISS channel and then go to conditional access / 6666 / key edit / BISS / Green button for add, the details for the channel, sid etc are there and all you need do is delete the 16x zero and type in the code and save.
For powervu you need to type the
full details for the TP in the same line as the code.
Owen
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Tue Jul 28, 2020 4:57 am
by ahaqwxl001
新买的v9 super 还不知道怎么用。
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Tue Jul 28, 2020 4:58 am
by ahaqwxl001
顺便问问，u盘导入key 的教程哪里有？
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Tue Jul 28, 2020 5:00 am
by Feralkiwi
ahaqwxl001 wrote: ↑Tue Jul 28, 2020 4:58 am
顺便问问，u盘导入key 的教程哪里有？
ahaqwxl001 wrote: ↑Tue Jul 28, 2020 4:57 am
新买的v9 super 还不知道怎么用。
There are
instructions here for all the units.
Please do not keep posting the same requests all over the board.
Other users will help,just please wait for their reply.
Please look at the forum rules.
Owen
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Tue Jul 28, 2020 5:05 am
by ahaqwxl001
Thank you so much!
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Posted: Mon Aug 24, 2020 4:47 pm
by star1658
机子到手都是自己摸索,现在只玩免费的
