GTmedie 9 super有没有手工写入Biss powervu 等的教程
Moderator: admin
GTmedie 9 super有没有手工写入Biss powervu 等的教程
怎么手动输入呢?除了通过U盘导入Key之外
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
If you start from the BISS channel and then go to conditional access / 6666 / key edit / BISS / Green button for add, the details for the channel, sid etc are there and all you need do is delete the 16x zero and type in the code and save.
For powervu you need to type the full details for the TP in the same line as the code.
Owen
For powervu you need to type the full details for the TP in the same line as the code.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 10
- Joined: Mon Jul 27, 2020 4:06 pm
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
新买的v9 super 还不知道怎么用。
-
- Posts: 10
- Joined: Mon Jul 27, 2020 4:06 pm
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
顺便问问,u盘导入key 的教程哪里有?
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
There are instructions here for all the units.
Please do not keep posting the same requests all over the board.
Other users will help,just please wait for their reply.
Please look at the forum rules.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 10
- Joined: Mon Jul 27, 2020 4:06 pm
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
Thank you so much!
Re: GTmedie 9 super有没有手工写入Biss powervu 等的教程
机子到手都是自己摸索,现在只玩免费的