Page 1 of 1
V8X最新固件是不是有问题?
Posted: Mon Nov 08, 2021 9:51 am
by songchaojun
Re: V8X最新固件是不是有问题?
Posted: Mon Nov 08, 2021 10:49 pm
by Feralkiwi
It may be that your dish is just below the reception needed for that signal.
Check your dish for direction skew etc, and any weeds on or in front of it.
If you have switches in the cable, you may get the TP with those removed, via a direct cable.
These high bit rate SR rate TP's need very good signal to lock.
Owen
Re: V8X最新固件是不是有问题?
Posted: Tue Nov 09, 2021 7:51 am
by songchaojun
谢谢你的回复。11G的那组信号强度很好也很稳定能达到90%,但质量却一点都没有。12G的那组很稳定,强度95%,质量85%。别人的V7S2X信号比我的差(无论是强度和质量)却能看到11G那组。
Re: V8X最新固件是不是有问题?
Posted: Tue Nov 09, 2021 8:02 pm
by Feralkiwi
The signal quality only shows after the unit gets a lock on the TP, so it will jump from zero to 80% in one step.
This is signal strength from your dish / cables etc.
Owen
Re: V8X最新固件是不是有问题?
Posted: Wed Nov 17, 2021 12:56 am
by wgqstar666
输入PLSN码后保存退出,再看就有蓝绿色信号条,才可以扫描节目。