AsiaSat 7 at 105.5°E SONY PowerVu

[Lining]

AsiaSat 7 at 105.5°E SONY PowerVu
Please upgrade the latest firmware usage
---------------------------------------------------------
P 0000 00 9ba0b0d45f0a93;105530000:V ;
P 0000 01 785e6aff44d7a9;105530000:V ;
---------------------------------------------------------

SONY.jpg (40.46 KiB) Viewed 3329 times

V7S SONY.jpg (65.7 KiB) Viewed 3329 times

[sareba]

AsiaSat 7 at 105.5°E SONY PowerVu
Please upgrade the latest firmware usage
---------------------------------------------------------
P 0000 00 9ba0b0d45f0a93;105530000:V ;
P 0000 01 785e6aff44d7a9;105530000:V ;
---------------------------------------------------------
SONY.jpg
V7S SONY.jpg

So you mean we only have to update with the latest firmware and the keys remain the same?

[cpr43]

Only new models with latest hashmode update.

[lennoniloveu]

what is the size of the dish? it looks that the signal quality of TP 4180 is stablized as showed in the pictures.

[Feralkiwi]

Only new models with latest hashmode update.

I thought Sony on Asiasat7 had gone to powervu+.

I will move my dish and test.

Owen

[Feralkiwi]

Only new models with latest hashmode update.

I thought Sony on Asiasat7 had gone to powervu+.

I will move my dish and test.

Owen

My V8UHD did find a powervu code and then showed a black screen.
It looks like there is a second level of encryption.

I will try sending the black screen output from the UHD through my DVB-T sender and see what another units says is there.

Owen

[Feralkiwi]

I tested the output of these Sony Powervu+ channel from the V8Pro2 to DVB-T sender to my GTCombo.
All I got was a FTA channel with a black screen.

It is odd that the V8Pro2 finds a code and then displays a black screen.

Owen

[STRETCH]

Remember this thread is two years old !!.

Den

[Feralkiwi]

Remember this thread is two years old !!.

Den

Yes I did spot that late.

Owen

[lennoniloveu]

Xxxxxxx iks server can decode it. but, unfortunately there is no xxxxxxx iks server installed in any gtmedia receiver. Can it be added in the next version of firmware?