133w Turner DAI HD MUX 3400V

Please discuss the softcam feature ,share the softcam key...

Moderators: admin, GTMedia Team

Post Reply
foebage
Posts: 25
Joined: Thu Nov 16, 2017 12:05 am
Location: erie, pa usa
Contact:

133w Turner DAI HD MUX 3400V

Post by foebage »

Is there a key for this DAI mux ? comes in at 3399v 30k
send plz
7.5" mesh
freesat7,gtmediav7sHD, Primestar Ku rig. openbox

User avatar
bwe
Posts: 380
Joined: Sun May 19, 2019 9:53 am
Location: Mars

Re: 133w Turner DAI HD MUX 3400V

Post by bwe »

foebage wrote:
Sun Aug 18, 2019 9:11 pm
Is there a key for this DAI mux ? comes in at 3399v 30k
send plz
I'm not picking up any signal on 3399 V 30000. You say 133w Turner Networks, but the only Turner Networks I'm picking up, and the only ones listed on Lyngsat, is 133w 4000 H 30000 (Verimatrix HD) and 133w 4020 V 29270 (Powervu SD).

Am I misunderstanding something here? The low band spectrum (3400 - 3600), at least for television, should be empty on this sat, I thought?

Are you using a C/Ku combo LNBF?

BWE :D
:mrgreen: V8 Pro2, V8 Nova, V7 Plus, V8X, X8, GTC, GT Combo and V8 Finder :mrgreen:

foebage
Posts: 25
Joined: Thu Nov 16, 2017 12:05 am
Location: erie, pa usa
Contact:

Re: 133w Turner DAI HD MUX 3400V

Post by foebage »

No, on CBAND. . I'm guessing its a Canadian feed as I am far up north. It has TCM Canada HD, Peachtree, tv HD etc. Almost looks like a copy of the mux that was on 125W. I no longer get that one on 125 for some reason. , ( the airport network).
7.5" mesh
freesat7,gtmediav7sHD, Primestar Ku rig. openbox

foebage
Posts: 25
Joined: Thu Nov 16, 2017 12:05 am
Location: erie, pa usa
Contact:

Re: 133w Turner DAI HD MUX 3400V

Post by foebage »

Yeah, meter pulls it as 3400 H 30k
VPID:08A2
APID0898
SID:0101

CNNHD
CNNE
CNNI
BOOM HD

TCM CANADA HD
WPCH HD
DAI CNN HD
DAI BOOM HD
DAI TRUTV
DAI TEN SE
DAI TBS W HD
DAI TOON W HD
DAI TNT W HD
7.5" mesh
freesat7,gtmediav7sHD, Primestar Ku rig. openbox

foebage
Posts: 25
Joined: Thu Nov 16, 2017 12:05 am
Location: erie, pa usa
Contact:

Re: 133w Turner DAI HD MUX 3400V

Post by foebage »

HOPE IT'S NOT VERIMATRIX.
7.5" mesh
freesat7,gtmediav7sHD, Primestar Ku rig. openbox

User avatar
bwe
Posts: 380
Joined: Sun May 19, 2019 9:53 am
Location: Mars

Re: 133w Turner DAI HD MUX 3400V

Post by bwe »

foebage wrote:
Mon Aug 19, 2019 5:41 pm
Yeah, meter pulls it as 3400 H 30k
VPID:08A2
APID0898
SID:0101

CNNHD
CNNE
CNNI
BOOM HD

TCM CANADA HD
WPCH HD
DAI CNN HD
DAI BOOM HD
DAI TRUTV
DAI TEN SE
DAI TBS W HD
DAI TOON W HD
DAI TNT W HD
Okay. Thanks for the information. The NJR LNB I'm using for the Horizontal side (using an orthomode feed) is 3.6 to 4.2, so that's why I'm not pulling it in. The Norsat on the Vertical side is wideband (3.4 to 4.2), so I would have to switch out the LNBs, and I'm probably not going to do that right now.

Appreciate the info, and nice find! :D

The channel list does look like an exact replica of the channels found on 4000 H 30000, which is HD and Verimatrix.

The information "i" button on your remote should tell you encryption. "P" is Powervu, "B" is Biss, "I" is Irdeto, etc. Press the "i" button on remote, and on the bottom left of popup box are letters that identify encryption. Maybe somebody else here will chime in with more details on this Mux.

Thanks again,
BWE :D
:mrgreen: V8 Pro2, V8 Nova, V7 Plus, V8X, X8, GTC, GT Combo and V8 Finder :mrgreen:

User avatar
bwe
Posts: 380
Joined: Sun May 19, 2019 9:53 am
Location: Mars

Re: 133w Turner DAI HD MUX 3400V

Post by bwe »

foebage wrote:
Mon Aug 19, 2019 5:37 pm
No, on CBAND. . I'm guessing its a Canadian feed as I am far up north. It has TCM Canada HD, Peachtree, tv HD etc. Almost looks like a copy of the mux that was on 125W. I no longer get that one on 125 for some reason. , ( the airport network).
The 2 Turner Network TP's on 125w, 3820 V 30000 (Powervu SD and a few HD) and 4040 H 30000 (Verimatrix HD), are still up on the 10 footer. I'm surprised your 7.5 footer isn't picking up 3820 V. When I had my 7.5 footer up, I pulled this one in fairly okay.

3820 V 30000 is DVB-S2 8psk 3/4, so minimum for a lock should be around 7.9 dB. I remember the 7.5 footer usually had problems pulling in the DVB-S2 8psk 5/6 TPs, which requires around 9.5 dB for a lock.

Good luck and keep us posted,
BWE :D
:mrgreen: V8 Pro2, V8 Nova, V7 Plus, V8X, X8, GTC, GT Combo and V8 Finder :mrgreen:

foebage
Posts: 25
Joined: Thu Nov 16, 2017 12:05 am
Location: erie, pa usa
Contact:

Re: 133w Turner DAI HD MUX 3400V

Post by foebage »

The airport mux on 125w has most of the same channels and is PowerVu.. Maybe key is same.

3820 V
DVB-S2
8PSK
30000-5/6

Airport Network
7.5" mesh
freesat7,gtmediav7sHD, Primestar Ku rig. openbox

User avatar
bwe
Posts: 380
Joined: Sun May 19, 2019 9:53 am
Location: Mars

Re: 133w Turner DAI HD MUX 3400V

Post by bwe »

foebage wrote:
Mon Aug 19, 2019 6:49 pm
The airport mux on 125w has most of the same channels and is PowerVu.. Maybe key is same.

3820 V
DVB-S2
8PSK
30000-5/6

Airport Network
Maybe. Give it try, and let us know how it goes. :D
:mrgreen: V8 Pro2, V8 Nova, V7 Plus, V8X, X8, GTC, GT Combo and V8 Finder :mrgreen:

Post Reply

Return to “Softcam :Biss/PowerVu/Tandberg”