Tp 3720 v 30000 58 west not autorolling anymore?

[MexicanSat]

Anyone kind enough to share with me the new(s) EMM KEY of transponder 3720 v 30000 58 west?

Seems like the one i have isnt autorolling anymore

Its been more than an hour and an a half, and im not getting the correct ecm keys

Please? anyone willing to share the EMM Key? 3720 v at 58 west

Thank in advance for your help.

[cpr43]

Anyone kind enough to share with me the new(s) EMM KEY of transponder 3720 v 30000 58 west?

Seems like the one i have isnt autorolling anymore

Its been more than an hour and an a half, and im not getting the correct ecm keys

Please? anyone willing to share the EMM Key? 3720 v at 58 west

Thank in advance for your help.

I sent you a PM with some, give it a try

[MexicanSat]

Thank you very much @cpr43 !!

Gonna try those EMM tonite

[MexicanSat]

Thank you very much for your help @cpr43 but none of your EMM keys worked

2 hours and no autoroll.

Seems like we need to update to NEW EMM keys for this transponder 3720/V/3000 58 west.

Because the old ones didnt work anymore.

If you get the New emm Keys in the future, dont forget to share them with me please, because i watch this tp a lot and i cant watch "Los Simpons" on FOX Latin anymore

[cpr43]

Did you delete all channels and blindscan again? I will work and ask iq180 to look at the stream. Hope it wasn't a change in CW same as other which not hack is available.

[iq180]

Did you delete all channels and blindscan again? I will work and ask iq180 to look at the stream. Hope it wasn't a change in CW same as other which not hack is available.

Not good, only getting 2 seconds of data every 5 min, it will take 2 weeks of recording just to get enough to run on PVH, and then there mite not be any good keys in it, not good, I will test all my old keys to see if any of them work.

[iq180]

Did you delete all channels and blindscan again? I will work and ask iq180 to look at the stream. Hope it wasn't a change in CW same as other which not hack is available.

Ok, there is hope, I now have them open, now to find out what EMM key is being used.

[cpr43]

Did you delete all channels and blindscan again? I will work and ask iq180 to look at the stream. Hope it wasn't a change in CW same as other which not hack is available.

Ok, there is hope, I now have them open, now to find out what EMM key is being used.

Excellent, thanks!!

[iq180]

Did you delete all channels and blindscan again? I will work and ask iq180 to look at the stream. Hope it wasn't a change in CW same as other which not hack is available.

Ok, there is hope, I now have them open, now to find out what EMM key is being used.

Excellent, thanks!!

Now I have bad news, there is no update being sent in the satellite data stream at this time, I have it working because of some old ECM keys, there is no good way to find out what ECM keys is being used without testing over 200 ECM keys.
My thinking on this is they will send out updates in the satellite stream at some time and if we have valid EMM keys and we are parked on that satellite TP we will get new ECM keys updates, the trouble is will it be once a day or once a week or every 2 weeks, I have an idea of when it will be but I want post that info in the open forum.

[MexicanSat]

That is correct, someone gave me his ECM, and now the channels are working fine. But i assume that is only for a few days, until they change them again.

I deleted the ecm key, and let it autoroll for 3 complete hours and nothing, no autoroll anymore.

Please keep up the good work iq180 and cpr43, and lets hope there's a fix or a temporary solution to this transponder in the next days.

Hope this is not the end of PowerVu as we know it

[MexicanSat]

Check your PM

I already sent you the current working ecm keys.

[cpr43]

That is correct, someone gave me his ECM, and now the channels are working fine. But i assume that is only for a few days, until they change them again.

I deleted the ecm key, and let it autoroll for 3 complete hours and nothing, no autoroll anymore.

Please keep up the good work iq180 and cpr43, and lets hope there's a fix or a temporary solution to this transponder in the next days.

Hope this is not the end of PowerVu as we know it

Like said it is not that the EMM are not working anymore. It is that no data is being send in the stream. You will need to be in the sat and in that TP at the time the data is send so it can do the autoroll (if EMM still active). Something similar happens with Epix @101W for some time. Only ECM were working for a long time. It will depend on be in there at the right time and maybe write the day and time.

[MexicanSat]

Some facebook groups reporting that same emm keys are working again.

I just tried, and boom! i got image back again!

Seems like they are sending data to the stream again.

My GtMedia Nova v8 working great again!!!

[cpr43]

Some facebook groups reporting that same emm keys are working again.

I just tried, and boom! i got image back again!

Seems like they are sending data to the stream again.

My GtMedia Nova v8 working great again!!!

Excellent, Thanks

[iq180]

Some facebook groups reporting that same emm keys are working again.

I just tried, and boom! i got image back again!

Seems like they are sending data to the stream again.

My GtMedia Nova v8 working great again!!!

Yes they are sending data in the stream again, now the question what is in the data, will it have Valid EMM keys or not, I will know the answer to that very soon.

[MexicanSat]

Yes they are sending data in the stream again, now the question what is in the data, will it have Valid EMM keys or not, I will know the answer to that very soon.

Thank you very much iq180 and cpr43

We'll be waiting for your results patiently.

I know it is a very hard work, we all apreciate the effort GTMEDIA TEAM are doing helping us all.